Cable Lock Blocks PIP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic Hinged Locking Cable Blocks
- Ocena
- 5 / 5
- Polubienia
- 136
- Pobrania
- 277
- Wydruki
- 2
- Wyświetlenia
- 1711
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — NoDerivatives
I made two versions of these little print in place locking cable blocks. A regular version you can use double sided sticky tape to mount. A magnetic version you can slide two 2x8mm round magnets in to use on the inside of lockers or anywhere a magnet is applicable to use. just pause at the appropriate layer depending on your layer height and insert the magnets.
Make sure your magnets are inserted the correct way
link to magnets - https://www.amazon.com/WUDIME-Magnets-Whiteboard-Neodymium-Refrigerator/dp/B0C7MM17XJ
The magnets also make them Stackable onto themselves. So you can arrange them on-top of themselves from a magnetic surface.
I Have printed these in PLA and PETG from varying layer heights from .12 to .20 and all function very well. Below are my recommended settings for best results.
.16 layer height
2 perimeters
2 top and bottom layers.
10% infill
-Enjoy-