1 / 4
Starlink Mini 18V RYOBI Battery Power Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is really easy to power your Starlink Mini with 18V RYOBI batteries.
- Ocena
- 5 / 5
- Polubienia
- 79
- Pobrania
- 340
- Wydruki
- 1
- Wyświetlenia
- 5602
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 6)Remiksy (0)Kolekcje (129)Powiązane
It is really easy to power your Starlink Mini with 18V RYOBI batteries. This will drive the 50' cable that comes with the Mini.
Instructions:
- Print the part
- Put the RYOBI terminals on a 18V battery. Check the polarity. There is a tab on one side. Make sure it aligns with the tab slot in the printed part
- Push the adapter down onto the battery. This should get the clip started into the printed part
- Remove the part/clip and use your thumb to fully seat the clip
- crimp female connectors onto the ends of the pigtail red/black wires
- push connectors onto terminals
- Insert the Starlink Mini cable into the Starlink Mini and into the pigtail connector
- put the adapter onto the RYOBI battery to use
Parts needed:
- 14AWG 5.5mm x 2.1mm DC Female Barrel connector pigtail ( https://amzn.to/3AJsv05 )
- 2M Starlink Mini Cable ( https://amzn.to/3MrQkfr )
- Ryobi 30001044 replacement terminals (
https://www.partswarehouse.com/Ryobi-Contact-Plate-Holder-Assembly-RY-300001044-p/hm-300001044.htm ) - Insulated 1/4" female terminals (https://amzn.to/32hGPIb)
Tools:
- Crimper ( https://amzn.to/3iZzvrl )
- Wire Stripper ( https://amzn.to/3aJLkyV )
FTC Disclaimer: We may earn commissions for purchases made through the links below. As Amazon Associates we earn from qualifying purchases.