Venom Pro Magazine Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mag extender will add an additional 3 dart capacity and has tabs to help attach to the venom pro mag
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 387
- Wydruki
- 4
- Wyświetlenia
- 1591
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this remix after printing the mini-talon extender FetteWorst made and realizing it needed some tweaking to work with the Venom Pro mag.
The spring in the Venom Pro mag is too short to support the 5 extra dart capacity. It is possible that it would work to size it to be 4 extra darts, but decided on 3 to bring the capacity up to 15 to match Nightingale mag size.
The Venom Pro mags have a notch at the bottom on each side. I added tabs on the inside so that the mag will click into these notches to help hold onto the magazine and not rely on a friction fit.
PRINT SETTINGS
Infill: 0%
Layer Height: .20
Walls: 3
Supports: None
UPDATE 8/29/2024
Updated the stl file as there was an issue with the original that the spring would catch and not allow the follower to slide into the extender. I named the file “venom-pro-mag-extender-fix” to help determine the difference if you downloaded the original.