Venom Pro Magazine Extender
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mag extender will add an additional 3 dart capacity and has tabs to help attach to the venom pro mag
- Rating
- 5 / 5
- Likes
- 65
- Downloads
- 387
- Makes
- 4
- Views
- 1,591
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this remix after printing the mini-talon extender FetteWorst made and realizing it needed some tweaking to work with the Venom Pro mag.
The spring in the Venom Pro mag is too short to support the 5 extra dart capacity. It is possible that it would work to size it to be 4 extra darts, but decided on 3 to bring the capacity up to 15 to match Nightingale mag size.
The Venom Pro mags have a notch at the bottom on each side. I added tabs on the inside so that the mag will click into these notches to help hold onto the magazine and not rely on a friction fit.
PRINT SETTINGS
Infill: 0%
Layer Height: .20
Walls: 3
Supports: None
UPDATE 8/29/2024
Updated the stl file as there was an issue with the original that the spring would catch and not allow the follower to slide into the extender. I named the file “venom-pro-mag-extender-fix” to help determine the difference if you downloaded the original.