SV08 Revo Support Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a quick model I made to mount a Voron Revo hot end to my SV08.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 1544
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a quick .3mf (OrcaSlicer 2.2.0) of an adapter I made for mounting a Revo hotend to the SV08 at the same length as the original hotend. Working on a finalized .STL
Printed in ASA with supports. Length should be close depending on your printer settings. Z-offset adjustment is required.
I used 2 M3 5x4 heat insert, 2 M3x18 bolts for mounting the fan to adapter and 2 M3 4.5x5.7 heat insert, 2 M3x16 bolts for mounting adapter to the SV08 hotend mount. 4 M3x8 bolts to mount the Revo to the adapter.
16.9mm length of Capricorn tube.
I used this with Nadir's print head cover, had to modify the fan opening a little. I have not used it with the stock cover.
Printed on SV08 with SOVOL enclosure in Polymaker ASA @ ext: 250c and 95c bed temp