Repurposed Yetix Mic Stand to Phone Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print aims to reuse your discarded Yeti mic stand into a sleek phone stand for video calling and media consumption.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
What:
This print aims to reuse your discarded Yeti mic stand into a sleek phone stand for video calling and media consumption. It offers a tasteful yet subtle desk option. There are two versions in this repository.
- The first is mounted to stand high and vertical. Use this version if you are using your phone as a video communication purpose as I found this version to be the perfect height.
- The seconded version is a low profile low CG aimed to provide a more subtle less pronounced version. I found this one is best for media consumption.
Why:
Like Patrick I found the old stand ,for the yeti mics, useful for a recycling project, and after some research I found Patrick's model. I decided it could use some improvements such as the elimination of the fastening hardware. After some initial testing with the stands included lugs, I found that they can handle a lot of force when combined with printed internal threads. This also gave me an excuse to try threads in Onshape as I am still trailing the program to switch to full time.
How:
Here is the Onshape CAD files link
To design this I looked at my reference and inspiration: the Convert Yeti X Blue microphone stand into pad reading support. by Patrick Sun
After a quick glance I grabbed my phone and held it up to the stand to see if there was a easy way to mount it. After measuring the stands lugs, I saw that there was plenty of thread engagement to use as a axle and pivot point. This allowed one of the project main goals of not using any external fastening hardware. I then started to make my variable table that I knew I would need so others can use the CAD files. Then after, I started to make the main plate and chose arbitrary values for it. I then made the bottom “axle box” that interfaced with the lugs to form a strong pivot point. Lastly, I added holes and used the “ThreadCreator” script to generate ISO threads with a 1mm pitch. This was the first threads I've made in Onshape. I followed this guide on YouTube by TEACH PRODUCT DESIGN to learn how to. The variable table will be explained at the bottom of the description.
Print Settings:
Important settings will be marked with Orange color *All Settings are a suggestion but what it was designed for
| Layer Height: | 0.4mm |
|---|---|
| Nozzle: | 0.6mm |
| Infill: | 15% |
| Infill Type: | Gyroid |
| Material: | PETG preferred, PLA |
| Supports: | No* |
| Vertical Shells: | 2 |
| Perimeter Generation: | Classic |
| Raft/Brim: | No |
*The Charger cut-out does
Stats:
| Mass: | 72.7 g |
| Volume: | 55894 mm³ |
| Surface Area: | 21426.5mm² |
CAD variable table
| Tolerance | 0.25 mm | Your printers tolerance. This is used in critical tolorances and is subtractive except the axle where it is additive |
| PlateThickness | 5 mm | How thick the main plate is this the main dimension of the holder |
| PlateWidth | 65mm - #Tolerance | overall width of main plate. This is the main dimension of the holder |
| PlateHeight | 100 mm | overall height of main plate. This is the main dimension of the holder |
| HexagonSpacing | #PlateWidth/6.5 | Calculated |
| AxleBoxHeigth | #PlateHeight*0.33 | Calculated |
| AxleBoxWidth | 15 mm | Dimension of how far the hump sticks out cannot exceed axle dimension |
| Axle | 6mm +#Tolerance | |
| PhoneWidth | 13 mm | How thick your phone is |
| PhoneLipWidth | #PhoneWidth + (#PhoneWidth*0.33) | Calculated |
| PhoneLipHeight | 10mm*0.5 | Calculated |
Changelog:
- added version with charger cut-out This part requires supports