SV07/SV07+ UHF biqu microprobe mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for use with melt zone extenders or rapido style UHF nuts
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
mounts to the bottom of the toolhead where the old fan was, with the probe mount pointed away from the hotend. it may need to be shimmed or sanded depending on exactly what nozzle you used, microprobes have a pretty tight window between doesn't actuate and rams into the part.
I printed mine in sirayatech fibreheart ABS, for this one I do recommend something that can take some pretty high temps. you really don't want your probe mount drooping. see photo for printing orientation, no supports necessary like this
offsets are x-5, y-31
#################################################
#biqu microprobe config
#################################################
[gcode_macro PROBE_DOWN]
gcode:
SET_PIN PIN=probe_enable VALUE=1
[gcode_macro PROBE_UP]
gcode:
SET_PIN PIN=probe_enable VALUE=0
[output_pin probe_enable]
pin: PD12 # Set to the control pin on your board
value: 0
[probe]
pin: ^!PD13 # NOTE FOR V2 users: Set this to ^!PC14 to set the low level trigger
deactivate_on_each_sample: False
x_offset: -5
y_offset: -31
#z_offset: 0 # Will be overridden when you do a PROBE_CALIBRATE
samples: 2
samples_tolerance: 0.05
samples_tolerance_retries: 3
activate_gcode:
PROBE_DOWN
G4 P500
deactivate_gcode:
PROBE_UP
#################################################
#end of biqu microprobe config
#################################################