Hanging Bracket for IKEA Ivar Bottle Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A screw-in bracket for holding the IKEA Ivar bottle/wine rack under shelves.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An under-shelf screw-in hanging bracket for the IKEA Ivar Bottle Rack used for mounting the rack in non-Ivar places. Can be printed in place without support materials but needs supports if both brackets are printed at the same time.
Example photos printed in standard PLA filament with the generic settings in Prusa Slicer on an Ender 3v2 with bed leveler and painted with Rustoleum Soft Iron metallic spray paint. Not quite the same color as the rack, but close enough.
The brackets can swivel to be used in “standing” mode as well as “hanging” mode.
Example photos show a modified Ivar rack, but the rack does NOT need to be modified at all to be used with these brackets.