1 / 4
dm Profissimo Duster Extension
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extension for the Profissimo duster to reach narrow spaces.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Extension for the Profissimo duster to reach narrow spaces.
NOTE: Extension is ~150mm, but you can stack them. I am using two extensions currently and they are holding very well.
I've included f3d file for easy modifications if needed.
Printing instructions:
- Material: PLA, PETG, ASA, ABS (most likely any would work)
- Layer height: 0.2 or less
- Nozzle size: 0.4 - 0.6
(both work well with Arachne perimeter generator) - Supports: Yes, unfortunately you need them. I was using normal supports in Orca slicer. You'll need eg. metal ruler to clean the slot. Will update model to include supports in near future.