Keychain salt shaker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple salt shaker to take with you.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 140
- Wydruki
- 1
- Wyświetlenia
- 528
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
There are 4 different sizes supplied. These refer to the inner diameter of the salt shaker. The one i printed is 10mm. If you also want to change other parameters, like length of the salt shaker, refer to the CAD model section.
Printing
To each size there is also a .3mf with the correct orientation of each model. If you are printing them separately just make sure the salt shaker is holes facing down.
I printed the model in PLA, i haven't extensively test it. PETG will probably last longer.
Usage
Insert a key ring into the hole on the cap, that is the top. The other cap is for refilling the salt shaker. Make sure you are refilling it with the top cap on. Using a funnel to refill it makes it easier.
CAD model
The most important parameters are:
diameter: inner diameter of the salt shakerheight: height of salt shaker
All the parameters have description in the onshape document, in case you need them.