Liczymy pasujące modele…
Revision Notes 8/23/2026 - I added a Small-to-Large connector cap after a few people requested it. There are three kinds of connector in this set. I have found the smaller connector fits many types of hand soap, dish soap and lotion. The…
TPU is the perfect material for approximating a PopSocket. With 7.3g of filament you can print your own and save a few bucks. This design is about 2mm taller than an actual PopSocket when compressed. I have included my Fusion design file…
NEW! Monogrammed Fusion360 File and 16oz files included. Simply edit sketch 12 with your name and voila! Occasionally a precious beer will slip through your fingers and end up in the dirt. This is unacceptable. A coozie with grip was…
My wife requested a travel case for cotton rounds so I made these for her. They are designed to hold ~60mm Swisspers rounds. It appears most other brands are slightly smaller so hopefully these are somewhat universal. If there is a demand…
Revision 2.0 Notes: Changed default parameters to improve fit and function. Reduced height of cap to 16mm. A TPU straw cover designed to fit the 10.5mm diameter silicone straw on the 40oz Hydroflask cup. The model is parametric so it…
Imagine you are 3 hours into a 3D model design you haven't saved yet (I know…) and suddenly your beloved Fluffy hops up on top of your PC and pushes the power button with her pretty pink paws. All of that work down the drain. If it…
I needed some replacement hooks for my shower curtain and liner. I recommend printing with lots of perimeters to increase strength. I used 10 perimeters and haven't had any break yet. It's designed to gently snap onto the curtain rod for…
A TPU snap enclosure for the eufy Security by Anker SmartTrack Link. Printed out of SainSmart teal TPU with the default settings for SainSmart TPU in PrusaSlicer. 0.15mm layer height paint-on supports under the keyring hole (included in…
Holds the Wiha 26590 Precision Nut Driver Set. Solidworks and STEP files are included for remixing. The finished assembly requires 4 M3 x 20mm screws (McMaster PN: 91292A123 ) and 4 3/8" adhesive backed bumpers (McMaster PN: 95495K931 )…
Revision 2.0 - Made wall thickness 1.6mm, reduced diameter by 0.5mm for an interference fit, repaired a parametric design error with the top edge fillet. This boot fits the 40oz Hydroflask cup with silicone straw (as seen at Costco). It…
Designed to snugly fit the Stanley Quencher 2.0 40oz tumbler. Print settings: TPU, 2-3 perimeters, 15% infill
Holds the Racingirl NIDICI Titanium Hexagon Screwdriver Wrench Tool Set or similar. Solidworks and STEP files are included for remixing. The finished assembly requires 4 M3 x 20mm screws (McMaster PN: 91292A123 ) and 4 3/8" adhesive…
I have a Hakko 611-2 dual solder spool reel and I love it so I created this printable version. Like the Hakko stand you can reverse the wire guide on the bottom spool so the stand can be used from the front and the back. Printing…
I saw a bowl like this in a strange book store and it looked like a fun design challenge so here is my take. The version I printed as a sample was 5mm thick and the embossed features protruded 1mm. The version I am uploading is 3mm thick…
Designed to snugly fit the Stanley Quencher 1.0 40oz tumbler. Print settings: TPU, 2-3 perimeters, 15% infill
This simple parametric razor holder has the following adjustable parameters: Printed out of Hatchbox Blue Gray PETG at 0.2mm layer height, 15% infill, 3 perimeters. With the default settings it uses 11.6g of filament. The default inside…
I used the Solidworks Polypanel snap connector design from here . More info on polypanels can be found here . This 2x2 Polypanel is part of a test fixture for an LED display. I added standoffs to hold an LED array. It can easily be…
Baffle Dimensions : 14" H x 7" D Baffle collars are designed to fit a 1in round pole or a 16.5mm square pole using 2x 45-50mm hose clamps. Baffle Printing Tips: PETG (recommended) or ASA, 2 perimeters, 15% infill, organic supports on…
I used to drop my aluminum cans in a paper bag in the garage and them transfer them to the green bags accepted at the recycling center. I designed this to cut out the middle man and have a way to drop them straight into the green bag. Is…
The embossed version of the boot has a smiley face texture. The smooth one is well... smooth. It won't work with rigid materials unless the model is altered because it has a 0.5mm interference fit. Recommended print settings: material:…
The battery door went missing on my son's omni wheel (mecanum) RC rock crawler so this part was born. I originally designed the clip part of the door as well but it was too fragile as a printed part so I made it into a solid wedge which…
The CR2032 rugged box is great except that it requires a spacer in the lid to keep the batteries from falling out inside the case when it is flipped upside down. I didn't have any EVA foam for this purpose so I made a squishy TPU insert…
I used Blender and Codex with Blender MCP to edit the STL file and scale this little guy up to about 7.7" tall. I hollowed out his eyes and made 2" cutouts with a downward slant to hold 2 deeply satisfying 2" stainless ball bearings. To…
Vent size: 8" x 4.5" (design files included for customization) After pulling 4 dead birds out of my microwave vent I noticed there was no screen on the outside vent cap. I made this to save the lives of countless suicidal birds. It…
One of the suspension struts broke on my son's omni wheel (mecanum) RC rock crawler so this part was born. The toy is called by various names: 1:16 R/C Rock Crawler with Omni Wheels, Cross-Country 1970 Off-Road RC Car, etc. The part is…
To wszystkie aktualnie dostępne wyniki.
