Liczymy pasujące modele…
I designed this PlayStation stand to allow the console to sit upright vertically. This is useful for consoles that have optical disc emulators installed such as XStation, PSIO or MODE. All ports are available as well as the parallel port…
Wydruk około 10,18 €–12,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a vertical stand for the Sony PSOne console.
Wydruk około 6,06 €–7,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Have you noticed that the popular GC Video HDMI dongles for the Gamecube sag when a heavy HDMI cable is plugged into it? This simple brace latches onto the Gamecube vents below the Digital Video port and support the dongle from sagging.…
If you have a Playstation 2 and want to save some space, I designed these simple stands to hold them upright. There are models for both PS2 Fat and Slim consoles. Fit all known revisions. Add some rubber feet to the bottom of them to keep…
Looking to upgrade the storage in your OG Xbox to a SSD or other 2.5 inch drive and want to securely hold it in place? Look no further than this 2.5 inch to 3.5 inch adapter that was custom designed specifically for the original Xbox.…
I designed this GPU fan adapter plate for the original XBox to allow you to use a 40mm fan instead of the loud and proprietary original fan. This will only work on the 1.0 version of the original XBox. If your XBox is a later model and…
The OG Xbox is a big chonker. Save some space and stand it upright. Bottom of stand has vent cutouts so the Xbox case can still breathe. I recommend placing rubber feet on the bottom of it to maintain air flow and so it won't slide around.
The Nexus 70mm fan seems to be a pretty common cooling upgrade for the original Xbox. The stock fan is a proprietary 72-ish mm job that has a specific shape and these tabs that secure it into the back of the console. However there is no…
This is an adapter plate to allow you to replace the stock custom 50mm fan in the Nintendo Gamecube with a standard 40mm x 10mm thick fan. I chose to use a Noctua 12v fan with it's low noise adapter for quiet operation. I recommend the…
This is a remix (of sorts) of one of my own designs, the Nexus 70mm fan mount for the original Xbox. The Nexus 70mm fan works quite well in the original Xbox, however I've had folks ask me about using the Noctua 60mm fan instead. This is…
To save more space, I designed this vertical stand for the Dreamcast. While ideally suited for DCs that are equipped with optical disc emulators, it will also work with ones that still have their gdrom installed. I recommend printing this…
I know there are a bunch of stands for the Analogue Pocket FPGA gaming handheld, but I wanted to create one for myself. Learn about all my designs at retrofrog.net
Ever since I introduced the original Noctua Fan mount for the Gamecube back in 2020, I wanted to revisit it to see if it could be improved upon. One thing I never liked was the ugly external fan screws that mount the Noctua fan to the…
Do you have the fantastic Tribute64, Brawler64 or Admiral BT wireless gamepads, but notice that the dongles that plug into the front of your console...sag? This is especially true with the Retro Fighters Brawler64 and made worse with a…
The RetroTINK 4k is here and glorious. However it's kinda large due to all of it's available IO. An easy way to save space is to stand it upright in a vertical fashion. The stand also has a built in place for the remote control to go when…
This is a 3d printable replacement power button for the Nintendo Gamecube. Spice up your 'Cube or give it a bit of flair with a new button. Or just replace one that is broken or missing. I would advise printing this at .15mm layer height…
I recently designed a case for the MiSTer FPGA console and thought I would share it with you. It supports the standard USB HUB and either Digital IO board or Analog IO board. There are different top pieces for the IO boards. It has 3…
The Sega Dreamcast is a great console with a controller that had some odd design choices made for it. The most confusing is the controller cable that exits the back of the controller and then attaches to a clip built into the bottom of…
Features: 2 Front mount USB ports Front mounted microSD card slot Console style power switch (loosely modeled after the PCEngine and TG16) Internal SATA HD easily accessible from the rear HDMI port Ethernet 3 more USB in the rear Serial…
Vertical Stand for the RetroTINK 5X Pro video scaler. Sits the 5X up in a vertical orientation taking up less desk/table space. Has built in spot for the remote to stand up right in so you have somewhere to store it. On the side of the…
I recently picked up a Nintendo Switch Lite and needed a stand to hold it upright when not in use, so I designed this. Holds the Switch Lite at a 12 degree angle and has a protrusion that fits into the notch on the back of the Lite to…
Features: 3 Front mount USB ports (1 internal for wifi or BT dongle) Left side mounted microSD card slot Console style power switch (loosely modeled after the PCEngine and TG16) HDMI port Serial User port (for SNAC and MT32-Pi) 5v DC…
I recently picked up a 14TB Western Digital Elements hard drive and noticed when placed in a vertical orientation that it wobble back and forth if I bumped my desk. This is a disaster waiting to happen. So I designed up this vertical…
MASE - the MiSTer Attached SATA Enclosure. This purpose designed enclosure houses a SATA to USB adapter and allows you to attach inexpensive and very large capacity 2.5 inch SATA hard drives and SSDs to your MiSTer. Supports 7 and 9.5mm…
Replacement dust cover for the EXT Bus on the rear of the white PCEngine, CoreGrafx and SuperGrafx console. Those pins have a tendency over time to develop corrosion, so keeping them protected is important. If you don't have the ability…
Display stand for the 8bitdo Arcade Stick.
This is a remix of the Little Boy S mini itx case specifically for the ITX Llama. It's modeled after 90s early beige PCs. Follow the Little Boy S assemble instructions including magnet installation, however you don't need the heat set…
This simple top and bottom plate for MiSTer FPGA helps protect sensitive electronics. The top plate has 14mm standoffs built into it to clear all 40mm x 10mm fans. The bottom plate has 4mm standoffs built into it to clear the bottom of…
New version 2. Based off feedback I have increased the thickness by 1.5mm which makes it a better fit to the keyboard of the Starlight greatly reducing flex. Thanks to user Strudster for the feedback and image. This is a keyboard brace…
This is an enclosure for the v4.1 Greaseweazle and a 3.5 inch floppy disk drive. This only works with the 4.1 greaseweazle board. Requires 4 m3 x 12mm screws to hold the drive into the enclosure and 2 m3 x 8mm to attach the back cover on…
One of the biggest pet peeves of mine with all of the enclosed Bambu printers is there rear mounted spool holder. It's hard to get it and pretty much means you can't place the print flat against a rear wall. So I designed my own side…
PicoGUS is a fantastic project to recreate the Gravis Ultrasound soundcard from the early 1990s for DOS PCs by Ian Scott. You can find out more info and how to build your own on author's Github: https://github.com/polpo/picogus Print the…
This is my take on a Zaparoo/TapTo NFC card reader for the MiSTer FPGA console. It's designed to mount to the bottom of a MiSTer stack and supports most case setups. Just use 4 M3 x 16mm or so screws to mount it to the bottom of your…
Update! New V2 model. I have updated the models to the new v2 model. It has a round base to keep the solder from accidently binding under the base in one of the corners and has a thicker top portion to keep it from binding under it as…
The STLs includes: Case Top, Case Bottom and Buttons. Make sure to print 3 of the buttons. Also, you will want to add supports to the top of the VGA cutout and the USB port beside the SD card cutout. Please see photos for details. To…
The STLs includes: Case Top, Case Bottom and Buttons. Make sure to print 3 of the buttons. Also, you will want to add supports to the top of the VGA cutout. Please see photos for details. To assemble you will remove the screws from the…
This is a mt32-pi case for the Raspberry Pi Zero 2 W and the mt32-pi hat sold by Yavimaya. The design includes 2 case pieces (front and back), a 11 mm spacer and 1 button. You will need to print off 2 buttons and 2 spacers. I have also…
RoTATE for the Nintendo Switch is a desk stand that securely holds it in place and allows you to effortlessly rotate it from horizontal to vertical. Many of the games on the Switch have optional vertical or TATE modes built in and whilst…
Update June 19th 2021. I've updated the logo on the design to reflect the new logo for the project. This is a cartridge slot dust cover for the OMVS Neo Geo console. It's 190mm wide, so it's a pretty large print. If you don't have the…
This is a 30mm fan mount for the front of the original Playstation. If you have something like MODE for Playstation and a hard drive in the console, it tends to get on the extremely warm side. I designed this mount to hold a 30mm fan. The…
Note: This requires a larger printer as the largest pieces are 306mm wide. I printed mine on a Elegoo Neptune 3 Plus. Features: 3 rear mounted USB ports Rocker Power Switch Internal SATA HD/SSD HDMI port Ethernet 4 internal USB ports (for…
Looking for a enclosure for your RetroNAS project? This one uses a common Western Digital Elements hard drive for storage. The WD drive sits down inside a custom stand and a Raspberry Pi 4 enclosure bolts onto the side making for a tidy…
This simple bracket allows you to lock your VMU into the Dreamcast controller and make it extremely difficult to remove. Useful for Kiosk applications or trade shows and conventions. Only works with original Dreamcast controllers and…
Want to save some space? Stand your Mac Mini up vertically! Mini locks into the stand and can't be slide out from the back or front and can only be lifted out. Even has cutouts for the cooling vents! Works with G4 and Early Intel Mac…
This is a shell for the version 3 pcb of the Sidecartridge: https://sidecartridge.com/products/sidecartridge-multidevice-atari-st/ This shell only fits the version 3 pcb and assumes that you have flush solderied the Raspberry Pi to the…
I recently received the excellent 3DO ODE by Fixel and decided to model up a mount for the ODE that doesn't rely on the original cdrom cage to be used. Print top side down with no supports.
This is a snap down retention bracket for hard drives and SSDs in MODE. Normally a SATA drive is secured down to MODE with 2 screws through the bottom. However that means you need to remove MODE from the console to get to the bottom of…
This is a 40mm fan adapter for the Apple Macintosh LC series of machines and machines that share the same chassis. Such LC, LCII, LCIII, Performa 475, LC 475, Quadra 605 and probably a couple others. The stock fan is a 60mm x 15mm thick…
This is my design for a modular Evercade game cartridge storage tower. Print what you need and then later, as your cart collection grows, print more add-on pieces. The base holds 5 game cartridges and each add-on section holds another 5…
I designed this vertical stand for the PixelFX Morph 4k Video scaler. This stand places the Morph in a vertical orientation and adds some needed weight and bulk to it to keep it from slipping around. Add rubber feet to the bottom to…
I designed this as an alternative to expensive case's requiring the official USB hub and IO board. This case holds a 30mm fan in the top and the popular Makerspot micro USB OTG hub in the bottom. The fan is a press fit. Simply press it in…
I designed this controller stand to sit underneath the NES Top Loader or Av Famicom to mimic the functionality that the original Famicom had with it's built in controller storage. Works with the Dogbone controller, the original NES…
If you have the passively cooled case from MiSTer Addons and want to spice up your buttons, I designed these replacement buttons to fit it. Print 3 buttons. I recommend printing them upside down (top of the button on the built plate) so…
MSDEXP Dust cover. Slides down over the the cartridge connector in the MSDEXP and protects it from Dust. Purchase the MSDXEP from https://mobiusstriptechnologies.com/product/msdexp/ If you would like to buy the MSDEXP Dust Cover and don't…
If you are looking for a safe storage solution for your NeoSaveMasta memory card for your Neo Geo, look no further! The NeoSaveKeepa was specifically designed to securely hold the NSM in place. The NeoSaveKeepa is ONLY compatible with…
If you are tired of having your Neo Geo memory cards or Amiga PCMCIA cards just laying around in random spots, then this is the print for you. Has 3 slots in the top to accommodate cards from either platform. I have uploaded 2 version:…
Replacement case design for the Interact/Datel V-MEM Virtual Memory Card System for the Playstation. The V-MEM was memory card system that plugged into the expansion port on the rear of the Playstation console and featured 60 memory cards…
Universal Laptop Vertical Stand. Fit's Macbook Air's, Macbook Pros and many Windows laptops. Adjusts from 12mm wide to 24mm wide. Allows you to safely tuck away your laptop when you run it in clamshell mode. To adjust the stand, flip it…
Simple display stand for your Evercade EXP and EXP-R handheld console.
Simple case for the Range Video RV-Splitter 4-way Composite Video Distribution Amplifier: https://www.rangevideo.com/products/rv-splitter-4-way-composite-video-distribution-amplifier Assembles using 4 m2.6 x 12mm screws. I also sell these…
The TG16 is a really wide console and takes up a ton of real estate having it out. So this vertical stand can save you some space. Designed to be used without the rear expansion cover in place. Want to get creative? If you have a…
This prints as a single piece and then folds shut with a nice snap lock mech. Don't try to print this as separate pieces as you will never be able to put them back together again as the hinge has tight tolerances and is designed to be…
This mounting plate allows you to replace the worn out guts found inside the Dyna Comp DCF 353 PSU with a new Meanwell RPT-60A Power supply. The RPT-60A provides the 5v, 12v and -5v just like the original PSU. The PSU mounts to the plate…
Like SNK? Print out this multicolor sign. Can sit flat on a desk or table or hung on a wall and even has built in wall hanger grip thingys. Place it flat on the build plate and in your slicer click on the sign and then use the option to…
I picked up a Raspberry Pi monitor and while it has a great kickstand on the back when in horizontal use, it would require some kind of stand or arm to use it vertically. So I designed this stand to use it on it's side. Great for usage…
The Seimitsu LS-56 is one of my favorite joystick levers of all time. Comes standard with a square gate, but depending on your preference you might like an Octo gate more as they allow you to easily identify corners when moving the lever…
To wszystkie aktualnie dostępne wyniki.
