Liczymy pasujące modele…
This is intended as a house number, which you can mount next to your front door, if you live in a house with a number. The design is twofold, it consists of a wall plate to be fixed with screws to the wall. The faceplate slides over the…
This model was based on another model, which I can't find any more, called “picture frame hanger L-shape”. The reason to create my own model was to have the option to screw it to the back of the frame and not just on the inside. In this…
I made this in two components, because it would be hard to print otherwise. The “bridge” is just to make it mountable a bit away from the wall, you don't need to print that part if you want to screw it straight on the wall. It was…
After a lot of frustration with off the shelf cable organisers and other methods, mostly fixed with screws in cage nuts, I decided to make something that can just click in place. Then I realised that I might want to take it off again, so…
I found several of this type of hanger models on thingiverse, none were customizable. So I re-created this model in openscad.
This is a quick thing I made to hold the parts in the kit (except for the charger). There wasn't another model that would fit my exact model and parts, so I made this. It's not made to be easily customizable, but it can be easily…
We got a set of six tomato knives (supersharp knives, which we'd like to keep that way), I wanted to have a way to store them. I found some knifeblocks which looked nice, but are way to big. So I thought, how hard can it be. It wasn't…
I bought a new "mouse" sander to replace one that didn't work anymore. Since I already have another rotating sander hanging on the wall, I know it's nice to have it ready like that so I immediately thought on how to hang this one in the…
I'm busy creating hanger for my tools on my new french cleat wall. To me it seemed that this should be the easiest way to hang the sander quickly and it works. I was unable to find a similar model, but I'm sure this isn't unique. french…
If you want to have a place to efficiently and aesthetically hold up to about 12 eggs on the table, this may come in handy. The whole thing can be customised using openscad, there are several factors to play with: // height of the largest…
Easy to print, takes about 10-20 minutes on my mk4s, depending on the size. Fun thing, I wanted to generate some sizes to upload, I came up with this commandline (linux) to do it: for i in {1..25}; do openscad --export-format asciistl -D…
I made this inspired by https://www.printables.com/model/688272-personal-score-board-for-catan The changes are numerous: custom number of points to keep extensible with additional board for special editions different pins mine goes up to…
You can customize to a certain extent, the type of ledstrip profile is an aluminium one with an indent on the side, in which the model grips the profile. Using two (or maybe more) prints of this model (in PLA or whatever), which you can…
I wanted a different text on the model (in dutch language) So I took the measurements from prusaslicer and recreated the plate for the sign… To print, you can use 2 colour changes to have the text in different colours, the left text is a…
Just a quick hack because I was unsure the tool was included with the package of the fly screen kit from horrenbouw (but it was included). It isn't better than the included tool, but in case you need one when it isn't included, this will…
Ok, I accidentally got myself a scrubmommy/daddy sponge because it looked funny, but it turns out my version has a bit different "face" than other models and besides I needed something that I could use to attach to a flat vertical…
Just a quick hack to fit the vacuum cleaner to the sander. If you need a different size for your vacuum cleaner, just modify the openscad file and regenerate the stl to fit your needs. (I printed it vertically, with (snug) supports…
I needed something to store the new tool I had, couldn't find something quickly that fit, so I made this. Since I made it in openscad, it's easy to make the length and hook diameter customisable, as well as the side supports that seemed…
A tear-off calendar ( scheurkalender in dutch), is a thick 365/366 pages block of paper with something for every day on it. They come in different sizes, so a single model is difficult. There are some other models available that may be…
See original model, mine is just a small change.
The idea was to put the wavlink device under my laptop, so my small desk gets used more efficiently, the hole in the right side is to make it easy to reach the power button of the wavlink. All the sides are separate and fit together in…
Some lights are very light and can hang just by the electrical wire. This is a simple block you can screw to the ceiling and it can hold the wire by keeping it in a bend. You need relatively stiff wire to hold, most kinds of electrical…
I originally made this to fit an 80mm spaced screws light to a gazelle model with screws spaced 25mm apart. I guess this can be used for other sizes as well, only 3 adapter sizes are included (25 to 80, 50 to 80 and 80 to 50), but you can…
The model is made in openscad, so if your powerbar/powerstrip is a different size, you can adjust it in openscad and make a new STL. Same for the rear of the sofa... I used cubic infill and 3 perimeters to make it a bit more robust
This model was made out of necessity, because we didn't have a good place to put the "fat pudding" we received as a gift. We have a lot of big magpies around, we don't want them to eat the whole thing in a few gulps, the smaller birds…
I have a smartgateways water meter sensor, it has to be quite exactly on the right spot to detect the spinning wheel. This model keeps it in place on my particular meter (from Vitens, the model of the meter is (I think) KIWA Sensus 620).…
I printed it in PLA, PETG would probably be ok (maybe better), could even be done in stiff TPU? 3 perimeters seemed like a smart idea. I had some trouble getting the values right for the diameters of the pipe and the wire, could be due to…
I wanted something to hang my battery powered trim router on a french cleat hanger. I can screw this to a cleat, but of course it can be screwed onto any vertical surface. The scad file can be adapted to fit other sizes or other things. I…
I got some smart gateway devices to measure my electricity and water consumption, (which I was already doing, but manually). These things I made to have them sort of organized on the wall, instead of dangling on their wires. To print, I…
To wszystkie aktualnie dostępne wyniki.
