Liczymy pasujące modele…
Printed out of PETG, 0.2mm layer height. Clicks in it's place over the busbar. Balancing wires will go out at the sides you can feed multiple balance wires through the covers to simplify the wiring. Fits these busbars:…
Terminal cover for double screw terminal Eve LiFePO4 prismatic cells (LF304, LF280K). I printed it out of PETG with 0.2mm layer height. Fits snuggly. Pay attention not to press too hard on the overhanging part of the aluminum terminal as…
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
WAGO 221-2411 “Durchgangsverbinder mit Hebel” 5P for my DIY CNC Mill “Volksfräse VF1” You can mount it on 60x60 Aluminium profiles with NUT 6 Du suchst einen Anschluss/Schaltplan für die Volksfräse? Auf meinem Blog findest du einen…
compatible with: only for Sensus 620 Watermeter only for ESP32 CAM with integrated Micro USB features: 360° rotatable top part (easy adjustments) ESP32 Cam can slide on top part (easy adjustments) use a sheet of paper on the LED slot to…
In our new kitchen we have a wine cabinet in the front. Unfortunately, the bottles are not centered in the closet. That pissed me off. So I designed this cool wine holder. Printed in white PLA (orbitech) @ 205°C 0.2mm layerheight. 2…
Schleppkette: https://www.igus.de/iPro/iPro_01_0003_0001_DEde.htm?c=DE&l=de Innenbreite Bi [mm]: 50mm Biegeradius R [mm]: 38mm An allen Enden müssen die passenden Anschlusselemente verwendet werden. Diese könnt ihr bei IGUS einfach mit…
Kabel: Aliexpress / Amazon Buchsen: Aliexpress / Amazon Version mit nur einem Anschluss Du suchst einen Anschluss/Schaltplan für die Volksfräse? Auf meinem Blog findest du einen Anschlussplan für die Volksfräse VF1 und dem Tillboard.
DJI F450 Bottom plate for mounting FC with 30x30mm mounting holes Thanks to kjamimate Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook:…
This is an adapter for the TBC Crossfire Micro and Full TX, which will fits right on your FrSky Taranis X-Lite. Wiring All you need to know, how to wire it up, you can find on my Blog: English:…
Slim cover for the nema23 motor from stepperonline. Use WAGO 221-2411 “Durchgangsverbinder mit Hebel” to connect wires. Use zipties as strain relief. I used it for my DIY CNC Maschine “ Volksfräse VF1 ” Du suchst einen…
Print it in TPU! I recommend SainSmart TPU! Support Me If you like my free designs and want to support me and my FPV Blog: Patreon Buy me a Beer on Thingiverse ("tip designer" on the left) or simply like my Facebook Page…
PROJECT FILES HERE https://github.com/tbs-trappy/source\_one Project license The frame files are released under GNU Public License (GPL) V3. More information here: https://www.gnu.org/licenses/gpl-3.0.en.html Project naming requirements…
Please use the tag "sourcetwo" when uploading files to thingiverse.com The idea The SOURCE TWO is a collaborative open source frame project initiated by Team BlackSheep, targeted at FPV racers. It follows the footsteps of SOURCE ONE, a…
I upgraded my camera for my Mendel90 (Octoprint). For mounting i used 3M VHB Tape You need: 3M VHB or some screw to mount 2x M3 Self Lock nut 1xM3x15mm (or longer) 2x M3x11mm (or longer) Please upload a photo of your make. This design is…
This is a Fanguard for the Fatshark Faceplate Customized version of http://www.thingiverse.com/thing:128718 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=128718 Please upload a photo of your make. This…
Eve LiFePo4 LF304 Wirebox for your balance cables. Compatible with with: Eve LiFePo4 LF304 Terminal Cover Eve LiFePo4 LF304 busbar cover (nkon.nl)
Inspired by this: http://www.thingiverse.com/thing:604078 Did a complete redesign from this groundplate: https://grabcad.com/library/dji-f450-qoadrotor-top-roof-1 Did not tested it. If you print one, upload your make with images! Thanks!…
i created a 40.5mm Cap Lens Holder for my Sony Nex 6. the small one is for the lower strap to get it near the camera. If you print one, please upload a photo! =) Du möchtest dieses Teil haben? Schreib mir einfach:…
I designed it in Fusion360. You can render your own STL with custom spacing. Open Sketch 1 as seen in the screenshots and edit the spacing. Everything else will be calculated and rendered automatically! Have fun and upload photos if you…
Taranis Holder. Just tested the mount. Works great. Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook: http://www.bit.ly/contact\_ps915…
Remix more stronger arms/motor mounts you can now access Scisky/Quanum USB Port better rubber mount hole for antenna integrated power Plug ( first insert plug than hot glue) higher topplate (+6mm) version with your own standoffs Thanks…
Kabel: Aliexpress / Amazon Buchsen: Aliexpress / Amazon Version mit zwei Anschlüssen Du suchst einen Anschluss/Schaltplan für die Volksfräse? Auf meinem Blog findest du einen Anschlussplan für die Volksfräse VF1 und dem Tillboard.
I bought two Floureon Lipos for my Skyzone FPV Goggles. To easy change and hold the lipo on the googlestraps, i designed this lipo holder. Install: clip the lipo holder on the googles straps. You can leave it there. to swap lipo, just…
Print it in TPU! Please use the tag "sourcetwo" when uploading files to thingiverse.com The idea The SOURCE TWO is a collaborative open source frame project initiated by Team BlackSheep, targeted at FPV racers. It follows the footsteps of…
This frame was developer from Hirates. https://m.facebook.com/HiRatesFPV/?locale2=de\_DE HS1177 FPV Mount for EGODRIFT BLACKPEARL 4MM FPV Frame: https://www.egodrift.com/shop/frames/blackpearl-frames/blackpearl-4mm-edition-frame.html…
FPV Antenna Mount for the SOURCE ONE Frame v0.1 Please join our Project Github Project: https://github.com/tbs-trappy/source\_one Releases: https://github.com/tbs-trappy/source\_one/releases Project Discussion:…
I upgraded my camera for my Mendel90 (Octoprint). For mounting i used 3M VHB Tape You need: 3M VHB or some screw to mount 2x M3 Self Lock nut 1xM3x15mm (or longer) 2x M3x11mm (or longer) Please upload a photo of your make. This design is…
Simple case for the Storm32 Gimbal Controller. Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook: http://www.bit.ly/contact\_ps915 Unterstützte…
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
This is a remix from a Teamviewer Session where is teached Patrick in Sketchup. This thing is for his china prusa i3. Please upload a photo of your make. Du möchtest dieses Teil haben und meine Arbeit unterstützten? Schreib mir einfach:…
Valve Mount for my water cooled “Volsfräse VF1” CNC Mill Can be used with this valves: https://de.aliexpress.com/item/4001338085412.html?spm=a2g0s.9042311.0.0.484c4c4d9lcR18 Du suchst einen Anschluss/Schaltplan für die Volksfräse? Auf…
I just designed a universal Fatshark mount based on the source below. Printed it to stick the Camera on an Phantom. You can stick the Camera mount with "3M VHB". You also need a M3x25 Screw and nut. maybe fatshark 700TVL also work. But…
DE: Durchmesser Loch: 55mm für UV Schutz in PETG oder ASA drucken EN: hole diameter: 55mm Print in UV resistance material like PETG or ASA
This is a 3D-printable enclosure designed to house a Victron2MQTT PCB and a Wemos D1. The case consists of two parts: a bottom housing and a snap-on top cover. The design includes ventilation slots for heat dissipation and mounting…
slim and compact Case for the Raspberry Pi Model B+ Its a remix of: http://www.thingiverse.com/thing:400624/ logo removed air flow slots added screw holes for very flat screws Category: Computer
This is a 3D-printable enclosure designed to house a Victron2MQTT PCB and a Wemos D1. The case consists of two parts: a bottom housing and a snap-on top cover, making assembly easy without the need for screws. The design includes…
I have often wondered why these senseless ZMR250 landig gear carbon parts are produced . They fall anyway from the first landing . So I designed a little stylish keychain where you can use the ZMR250 landig gear with. Have fun with it!…
Remix from Judar! Thanks! Added holes for Ziptie Antennas rounded a little (XT60 will slide better) one version with tiny holes for the antennas EDIT: New version. If you have problems with the XT60 Plug... use the new version, it will…
Please use the tag "sourcepodracer" when uploading files to thingiverse.com The idea The TBS Source PodRacer is a ultralight concept frame for 4 and 5 inch propellers using the new lightweight building materials such as the small t-mount…
File Info GoPro Hero 5/6/7 Action Cam Mount for the SourceOne Frame Print it in TPU! I recommend SainSmart TPU! Support Me If you like my free designs and want to support me and my FPV Blog: Patreon Buy me a Beer on Thingiverse ("tip…
Please upload a photo of your make. This design is not for commercial use or selling! Unterstützte meine Arbeit / Support my work: Thanks! =) Category: R/C Vehicles
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
Immortal-T Antenna Mount for the SOURCE ONE Frame v0.1 Please join our Project Github Project: https://github.com/tbs-trappy/source\_one Releases: https://github.com/tbs-trappy/source\_one/releases Project Discussion:…
i wanted to mount the Fatshark Faceplate on the Skyzone. So i designed a clip and printed it with my Mendel90 3D Printer. You can buy it here: http://bit.ly/skyzone\_clip Here you can the the article about that mod on my blog (german) On…
You can use it for 3D Acro flying or even as a FPV Racing Quad. Supported arms: ZMR250 Thickness: 3mm 4mm 5mm Possible setup: Motor…
This is a remix. I added a fatshark 600tvl Mount You can use this Servo: http://www.hobbyking.com/hobbyking/store/\_\_663\_\_HXT500\_6\_2g\_0\_6kg\_08sec\_Micro\_Servo.html Or this:…
Please use the tag "sourcetwo" when uploading files to thingiverse.com The idea The SOURCE TWO is a collaborative open source frame project initiated by Team BlackSheep, targeted at FPV racers. It follows the footsteps of SOURCE ONE, a…
File Info Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! Print it in…
File Info 30° Yakuza Shadow GoPro Mount 35° Yakuza Shadow GoPro Mount 40° Yakuza Shadow GoPro Mount 45° Yakuza Shadow GoPro Mount 50° Yakuza Shadow GoPro Mount Print it in TPU! I recommend SainSmart TPU! ### Support Me If you like my free…
File Info GoPro Hero 5/6/7 Action Cam Mount for the Tribute EVO Racing Frame Print it in TPU! I recommend SainSmart TPU! Support Me If you like my free designs and want to support me and my FPV Blog: Patreon Buy me a Beer on Thingiverse…
File Info 35° Yakuza GoPro Mount 45° Yakuza GoPro Mount 55° Yakuza GoPro Mount Print it in TPU! I recommend SainSmart TPU! ### Support Me If you like my free designs and want to support me and my FPV Blog: Patreon Buy me a Beer on…
File Info GoPro Hero 5/6/7 Action Cam Mount for the SourceTwo Frame Print it in TPU! I recommend SainSmart TPU! Support Me If you like my free designs and want to support me and my FPV Blog: Patreon Buy me a Beer on Thingiverse ("tip…
This tool is for better flashing Bootloaders on ESCs. I designed it for the DYS ESCs. The probe pins has springs inside. =) You need this: Spring Test Probe Pogo Pin Dia 0.68mm Length 16mm http://bit.ly/1N1n1rb a bunch of thin wires hot…
Merry Christmas Category: Art
A simple clip for the Technoline TX29DTH-IT temperature and humidity sensor. You can stick it on smooth surfaces such as tiles. I am using 3M VHB. Category: Electronics
One day, I was sitting on my couch and watched some of my favourite series and opend up a beer. Then i tried to balance it on the couch next to me because i was in an relaxing position and no flat surface was around me. It was nearly…
Still in prgress. I ordered the wrong fans. They just run good at 12V, but i want a PWM 0-12V blower fan. If anybody knows a good blower fan, please comment. This is the fan i designed it for: http://bit.ly/1YWLV7y At 100% (12V) both fans…
Mount for the new Insta360 Go Print in TPU! Category: R/C Vehicles
For Weidmann Elektronik - IR Schreib/Lesekopf USB (Optokopf) Use 3M VHB on the bottom to glue it to your Easymeter. You can remove everything without a trace. Print it in TPU! I recommend SainSmart TPU! Deutsch: Klebe das Druckteil mit 3M…
Made to be used without the original box. Use tissue that comes in +-120mm cube cardboard boxes, then remove the tissue pile and insert it into the printed container. Use brim and organic support.
Antenna holder for emax Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook: http://www.bit.ly/contact\_ps915 Unterstützte meine Arbeit / Support…
there were manny errors on the initial design. Fixed them and remixed it Thanks for the design Krischan1986! ;-) Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib…
Remix of "EMAX 250 Nighthawk Pro Side Cover" from norf Honecomb tested. A little wak, but looks awesome! =) other not tested. Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil…
simple mount for ziptie antennas Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook: http://www.bit.ly/contact\_ps915 Unterstützte meine Arbeit /…
Not printed yet, but print with support and scale it to your size of choice! ;-) If you print want, please upload a photo for the gallery! Category: Other
So this is a thumb screw for the two bolts! The first times, it can be hard to put on the screw but after a few times it will fit! Instructions 100% Infill 0,2mm layer height Category: 3D Printer Accessories
This filament cleaner works with side mounted filament rolls. It will clean you filament from dust. The thing has a hinge to guide the filament without friction, also when you filament roll gets nearly empty. Please upload a photo of your…
just 4 fun Please upload a photo of your make . ;-) Thanks Category: R/C Vehicles
Simple and very lightweight case for the Skyline32 Flightcrontroller from EMAX. You can use M3 Screws Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach:…
i just fixed the version of diepie and added some radii The model not in the right dimensions and also broken But thanks for the design! really usefull Please upload a photo of your make. This design is not for commercial use or selling!…
Customized version of http://www.thingiverse.com/thing:1040899 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=1040899 Instructions Using the following options: label_length = 50 number_of_cables = 1…
Remix of "EMAX 250 Nighthawk Pro Side Cover" from norf Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook: http://www.bit.ly/contact\_ps915…
Print with TPU from SainSamrt! This is beta, please report back any issues! Category: R/C Vehicles
I realised, that my new Malyan M150 Printer cant handle Flex Filament like "SainSmart" very well. So i took it apart and did a complete Design of the Extruder Part. Now no flex filament wont stop my printer! =) Print Settings Rafts: No…
i wanted a more lightweight holder and with the "FPV Racer Germany" logo. Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook:…
This is a mount protects your receiver antennas. Print it in TPU! Category: R/C Vehicles
This is a mount protects your receiver and fpv antenna. Print it in TPU! Video: https://www.facebook.com/philipp.seidel.blog/videos/791228861076414/?notif\_id=1523983404432651¬if\_t=page\_post\_reaction Category: R/C Vehicles
This is a mount protects your receiver antennas. Print it in TPU! Category: R/C Vehicles
15° Xiaomi Yi mount for the ImmersionRC Vortex 285 Racing Quad Use Zipties to mount Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook:…
model of the EMAX Skyline32 Category: R/C Vehicles
Last year, at the FPV race in Bexbach, I had an idea to build a fpv splitscreen for the next events to watch the races from the perspectives of all pilots. Unfortunately, I have not finished my project to the Friedewalde FPV Festival. In…
ESKALATION @FPV Racer Germany http://www.istder50eurochinadruckerschonangekommen.de/ Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook:…
Original from brYen2k: Simplest way to create a 5" Bullnose Prop. Just cut off the edges with a Sidecutter. The STL was not printable, so i fixed it! Category: R/C Vehicles
Its a remix from tlanfer. Thanks for the design. I just added 15 and 20 degrees. 10° - tested 15° - not tested 20° - not tested Update: Added Plate for SJ4000 not tested Please upload a photo of your make. This design is not for…
Just the first design. Does not look good from the front because of the round dibonds. Next version will be better. ;-) DONT USE THIS! I designed a new version http://www.thingiverse.com/thing:735726 Category: 3D Printer Accessories
https://blog.seidel-philipp.de/cherrycraft-supreme-5-stretchedx-fpv-frame/ Category: R/C Vehicles
VTX Antenna Mount for the SOURCE ONE Frame v0.1 Please join our Project Github Project: https://github.com/tbs-trappy/source\_one Releases: https://github.com/tbs-trappy/source\_one/releases Project Discussion:…
To wszystkie aktualnie dostępne wyniki.
![Universal Lens Cap Holder for 40.5mm - [Sony NEX 6]](https://media.printables.com/media/prints/97005/images/987967_4a1aa7e4-aedd-4f33-b113-b0b97e7f8753/img_20150830_010829_display_large_97005.jpg)
![[REMIX] Micro 105 FPV Quadcopter - 8.5mm/7mm Motors, Micro Scisky](https://media.printables.com/media/prints/96969/images/987621_814f2199-5e40-483a-8407-7894949c157c/d66285e5719711f3ad1de83471915b03_display_large_96.jpg)
![Adjustable Universal Fatshark 600TVL Camera Mount [sticky mount]](https://media.printables.com/media/prints/97006/images/987979_c85c9d4c-6a09-4b50-9334-d94a50ee7ce6/fat_1_display_large_97006.jpg)
