P
PrintablesJEpiston
Egg holder Chick
Printed in PLA Prusament Vanilla White and Fluorescent orange (REAL) with tree support
- Pobrania
- 803
- Polubienia
- 171
- Ocena
- 4,95
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesJEpiston
Splint for finger arthritis
This was a project for a familie member with finger arthritis were the splint.brace you can buy didn't fit like she wanted to. Printed with a Resin from Siraya tech mixture Tenacious / fast mix 1:6 STL-files “Brace 1,5 mm v3” is 45 mm…
- Pobrania
- 748
- Polubienia
- 123
- Ocena
- 0
P
PrintablesJEpiston
Tick remover
Small but strong Tick remover printed wit Siraya tech resin mixture of Tenacious and Fast 1:6 Print directly on the flexible buildplate ( Whambam ) to get a sharp slothole to get the tick behind the head.
- Pobrania
- 604
- Polubienia
- 70
- Ocena
- 5
P
PrintablesJEpiston
Phone charger holder for wall mounted socket
Another holder for charging two mobile phones . The holder is hanging on the powerplug that is normally added to the phone. One STL file is without text "Samsung" Print Settings Rafts: No Supports: No Resolution: 0,2 Infill: 20-30% Notes:…
- Pobrania
- 490
- Polubienia
- 54
- Ocena
- 4,75
P
PrintablesJEpiston
Air regulator/vent
No introduction needed, easy print, best in PLA
- Pobrania
- 175
- Polubienia
- 45
- Ocena
- 5
P
PrintablesJEpiston
Filament dehumidifier
Silica gel holder, round 50 mm, that fits in the reel of the filament. to keep the watervapor out of your filament. The Silica Gel (2-4 mm size) is a color changing type, so you should know when to regenerate it. The STL files Silica…
- Pobrania
- 169
- Polubienia
- 43
- Ocena
- 4,33
P
PrintablesJEpiston
Clip for working without cover on Cubiko CNC router
Click the clip on the left slide of the housing and slide it to the right over the switch. This one will stay on and press the switch as it should be.
- Pobrania
- 118
- Polubienia
- 7
- Ocena
- 5
P
PrintablesJEpiston
Toothbrush, Oral B iO holder
Wall holder to mount the Oral B type iO electric toothbrush with a guidance for the wire (upwards).
- Pobrania
- 110
- Polubienia
- 26
- Ocena
- 5
P
PrintablesJEpiston
MK4 nozzle holder remix for Obxidian nozzles
In the nice design from Plabs.zc the MK4 Obxidian nozzles doesn't fit because the hexagon is about 1 mm higher.
- Pobrania
- 100
- Polubienia
- 6
- Ocena
- 4,5
P
PrintablesJEpiston
Nerf blowgun six shooter
Update: 20-11-2021 Problem that the stucked darts, after entering the barrel! Drill the first 80-100 mm of the barrel to 14 mm and the darts have enough speed and guidance to enter the tube/barrel whitout problems! Canged version from the…
- Pobrania
- 78
- Polubienia
- 30
- Ocena
- 0
P
PrintablesJEpiston
Tyleenhose coupling tool (hose 25 mm diam.)
Wrench to get more momentum/force on couplings for 25 mm tyleen hose than possible by hand. These are made for Brand Irretec
- Pobrania
- 59
- Polubienia
- 14
- Ocena
- 0
P
PrintablesJEpiston
Nordich walking pole holder
Holder for two sets Nordich walking pole/stick (diameter max 18 mm)
- Pobrania
- 53
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJEpiston
Stepper motor holder (Nema 17)
Printed in PLA, nozzle 0,4 , layer 0,2. Fits together without use of glue.
- Pobrania
- 37
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJEpiston
Showcase door lock
Simple lock to keep my grandson out of the showcase (for now)! the distance between the knobs is about 103 mm Print Settings Rafts: No Supports: No Resolution: 0,2 Infill: 50% Notes: No brainer Category: Household Supplies
- Pobrania
- 33
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJEpiston
Extention cord (patch cable) lock
THis is a lock to prevend that the power extention cord detache from the Hedgecutter, leaf blower or Grasmower. Print Settings Supports: Yes Resolution: 0,2 Infill: 75% Notes: Filament PETG Category: Outdoor & Garden
- Pobrania
- 32
- Polubienia
- 7
- Ocena
- 0
P
PrintablesJEpiston
Prusa (Black) Delta powersupply 3-connector version
You need additional M3 Heat inserts and longer M3 bolts (35 mm). Need use of support. The XT 60 connector can be slide i from the text side and will be kept in place with the lock bridge. (Firm enough for removing the connector wen needed)
- Pobrania
- 24
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJEpiston
Propane hose clamp
Pressing a propane hose on a coupling together with the press ring/bush is not easy because the rubber hose is deforming. TH=his vise /gripper is keeping bthe hose (6,3 x 13 mm) straight so it can be pushed on any coupling. Once pressed…
- Pobrania
- 23
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJEpiston
Stand for camera equiped with adapter for Cotton Carrier CCS Harnas
The Cotton Carrier CCS camera Harnas has one disadvantage meaning the connector part that is screwed on the camera. This is avoiding that the camera can be placed horizontal on the desk to work with it. Regardless the length of an…
- Pobrania
- 22
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJEpiston
Wall mount Samsung SM-T110
Wall mount for the 7" Samsung tablet Print Settings Rafts: No Supports: No Resolution: 0,2 Infill: 35% Notes: The Hole on top is ment to place a self tapping screw to fix/clamp the tablet in place to avoid moving. Picture is from a print…
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJEpiston
buckets for TAYG Assortment case
No brainer just print. (ussed Prusament Jungle green) You must also mirror the top version since there are a left and right version with one larger radius needed.
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJEpiston
LED lighting on Ikea Lack enclosure
The lightbars (30 cm) are available in a Yellow or white light version! Attache (or glue if needed) the tube top and bot (bottom) on the end of the led bar. Drill a hole 12 mm (location can be found by ussing the closed bottom holder as…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 4
P
PrintablesJEpiston
Stand fo Self balancing robot
This stand can be clipped or glued under the bottomplate of the self balancing robots (jjrobots) You need a spring (pen) and a two small pins. Because of the small parts Resin printing is the best option
- Pobrania
- 15
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJEpiston
Alternative cooling stepperdrivers Motherboard Vertex K8400
Just a try-out for an alternative cooling (don't know if I need it but it was fun to make). Instructions I used a new ventilator 40 mm but the one provided by Velleman can also be used (if it still works without noice). Need to drill some…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJEpiston
Wateringcan top holder
Tiered of all the parts laying around! Holder for two watering can tops and one Hozelock quick detach spray nozzle Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 75% Notes: No brainer, choose what you like…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJEpiston
High pressure coocker handles
Lifting arms for high pressure pan basket. Easy to print , preferabel printed in ASA.
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJEpiston
Print Sheet fixator
Aditional part for the sheetholder designed by Sheet holder for original Prusa Enclosure with Tool Holder by 3D-Druckfactory | Download free STL model | Printables.com This is avoid fibrating of the plates. Green flexible part is printed…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 5
P
PrintablesJEpiston
Clip for attaching steel wiremesh
Clips to attache steel wiremesh (wire diam.5 mm) to steel tubes (square 30 mm) to make a fishpound safe for Children. Print Settings Rafts: No Supports: No Resolution: 0,2 mm Infill: 75-100% Notes: Printed in PET-G (in use for over two…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJEpiston
Ventilator controler (temprature controlled)
On/off switch for the main 12VDC cooling ventilator in the lower section of the Rostock max V3 and V3.2 so after a long print job is done the loud ventilator will stop keeping all the sleep needed people awake (only the small cooling…
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJEpiston
Stand for saltgun
Printed the fly with resin scaled to 150 % to get the correct hight. The wings are also scaled 150 % and printed in Neutral PETG
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.