27 modeli
Quick fix for RJ45 plugs whose little clip broke off. Because there are so many variations of RJ45 plugs and every one needs a different version of this model, I uploaded a .STEP file and an editable Fusion 360 file where all the…
You attach the bands by pushing a looped end into the slot from the side and locking it with a piece of filament through the center of the loop. Print in 0.15mm with 5 perimeters and 13 top/bottom layers. I used different infill…
The file samla3x2x2_project.3mf has optimized settings for fast vase printing of the boxes in transparent PLA.
Modeled in Fusion 360 and then made permeable to air by modifying the models with cylinder volumes that delete the perimeter/bottom/top layers for the parts that should be porous. The 60% gyroid infill gives a very small pore size that…
Simple height adjustable, two part table saw for the (Lidl) Parkside PFBS 12 B2. Now with stop block.
Bracket for draining the excess resin. Fits under the closed cover.
Choose the right case depending on how you soldered the pin header to the back of the Neopixel ring and print in a dark color. Print the diffuser with a clear filament and 90-100% infill.
SG90S servo like you get on Aliexpress or Banggood with accurate dimensions. Use as a consruction aid for modeling. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament:…
I only added a little tab at the other side of the nut, which makes it easier to remove if it's jammed on the valve.
If you need reading glasses and have one of those FPV goggles, you know the pain of only seeing a blurred image on the screen 😓 This little clip let's you use the lenses from one of those cheap magnifying glasses:…
Wall holder for a wireless Parkside (Lidl) power tool. How I Designed This Made a photo of the bottom of the drill. Loaded that into an attached canvas. Constructed spline onto one side of the contour. Mirrored spline. Extruded as…
I remixed the model so it fits when an OLED display is soldered directly to the board pins. Changed the diameter of the screw holes so that 3mm screws can be used. Added spacers for greater stability. I printed the front with the display…
My Super Lube tube had a M14 thread so I hacked the model in Fusion 360 to fit the tube. FIXED Category: 3D Printing
Print in TPU with 10% infill. Use the long version if the plastic cap broke off from the stopper (flat black thing on photo) to compensate for the missing 3mm. Use the short version if the cap is still in place.
cover for a 40mm fan Category: 3D Printer Accessories
Spacer that let's you use 2032 cells in devices that want a 2430 cell.
Digital caliper holder for Ikea Ivar shelf system.
Print in TPU or other flex material with 100% infill.
Universal attachment system for the frontside of Ikea Ivar racks. You can easily remix your own attachments by using the model from example.stl and either combining it with your model or boolean substracting the front part of the…
Compass holder for those cheap little plastic ball compasses. Print in TPU and slab some Velcro on the bottom.
I printed mine in PETG with supports around the holes. You can loop a little piece of TPU filament through the holes as shown on the second image, to secure it against falling out of the case and remove it if you're waiting for your…
In the unfortunate event of a tree landing, the cord can be lowered to the ground so that rescuers can attach a rescue cord. BBQ skewers can be inserted into the holes to make winding easier. (I lost my DHV cord with the lead weight)
Print with TPU and ≥=70% infill. Pull out the worn original feet with a screw driver or knife and push in the replacement feet.
For storing a flexible build plate vertically in a Ikea Ivar shelf.
Safety clip for Karpofly paragliding harnesses. Remove one of the hooks for closing the pod and attach the clip with a short cord to the chest strap then close pod with the clip. This way the cockpit hangs around your knees if the getup…
Print the frame in PETG and the button in TPU or PETG. The frame model already comes with a brim because I had problems with the slicer brim ripping off the print on my A1 mini. Use a cutter to remove it from the print. Use a 3cm piece of…
You can buy the electronics from http://www.ebay.com/usr/impexeris . The opening for the tube is for a SI-29BG. Category: Gadgets
To wszystkie aktualnie dostępne wyniki.
