Liczymy pasujące modele…
This model(set) is for those who want to connect, firmly but detachable, something round between 1 and 16 mm diameter to their print. A collet then is a good option. have an ER25 collar holder and nut system but in their collet collection…
The model is a 200 mm diameter (so it fits on your MK3 and MK4 printer) Longworth type chuck. Included models are base adapter plate, front plate with fitting ring, M5 slider nuts and M5 buffer cores. In compression it can hold bowls up…
I use Gilles Bouissac's library for almost all my mechanical designs, but for closing lids of small boxes etc. I needed large diameter threads with smaller pitch than offered by the original fine metric thread modules, that generally…
A woodturning scraper works by the virtue of a burr on the cutting edge. On a normal workbench grinder you can simply place the toolrest a bit lower to achieve an angle greater than 90 degrees and grind your tool ‘upside down’. The Sorby…
A Lego Technic base for mounting on the Sparkfun XRP Robot. The models provided include a frame and clips and pins to hold the frame onto the frame of the robot. This way you can use your existing body and you can simply click the frame…
I made these 53 mm external jaws to fit bowls I made with the Nova chuck with standard jaws on the SC1 so I could finish or post-work the bottoms of bowls more easily. The SC1 is so small (51 mm diameter) it is not in the way when…
I sometimes want to mount my bowl or vase on the lathe in reverse direction for sanding or light finishing touch-up but I want to keep the alignment of the chuck that is still mounted. I then drive the bowl with a soft prop chuck and…
Whether you use a faceplate or a chuck, the actual center of turning will not be where you planned it. The wood may shrink or swell due to humidity, the wood may give way to the pressure of the chuck jaws differently based on distance to…
A flipstop for 60x32 mm aluminium profile as used on bandsaws, router tables and drill presses. The following image shows the profile, as it came on my Record Power bandsaw Sabre250. The flipstop is anchored in the T-slot in the top of…
I make my models for chucks and arbors for M33, with the report at the origin. To get a UNC 1"version load this model as ‘added part' in PrusaSlicer and it will fill the M33 space like a merged-in adapter. The combination will be sliced…
Protectors for selected spur drives as used woodturning lathes A good spur drive is sharp. It may cut your hand when 'popped' into the taper. Then you kick it out of the taper, it may cut your hand or get damaged when it falls on the…
At some point in time I had to mount my Record Power SC4 chuck on an easel to hold a bowl I was repairing. The easel offered a 22 mm pipe to fit on. My lathe adapter to M33 was in use elsewhere so instead of an adapter to M33 I made an…
A ‘shoe’ for the drive center. It lets you hold it firmly on the palm of your hand and so ‘slam’ the MT home safely and securely. No risk of the sharp 9 mm center pin piecing the rag you would otherwise probably grab for this. The load is…
To fit properly on an M33 pickup of a woodturning lathe the tool should leave sufficient depth for the 9 mm deep 34 mm diameter report. This condition is not always fulfilled, in particular on tools sold via AliExpress, like this one , in…
An easy and stable tool to mount a micrometer, a.k.a dial gauge, on the banjo of a woodturning lathe, as may be needed to determine bearing play, and trueness of center of appendages. The dimensions are set for the MidiPro lathe, which…
A sleeve adapter for the banjo of the MidiPro woodturning lathe. It lets you firmly mount a 20 mm diameter shaft in the 25.4 mm bore of the banjo. It is intended for simple accessories like a sanding table, drill guide, or at max a small…
To wszystkie aktualnie dostępne wyniki.
