Liczymy pasujące modele…
Gridfinity bin 2x5 slightly modified (no magnet holes) and a solidworks native file for edit. Im sure I will make improvements and modifications in the future, I didnt seem to be able to find this particular size that fit my small height…
I made a smaller 170mm version as it fit better on my small printer, there is a larger 208mm version.
I used standard printer settings with 10% infill for my M5C. Tracks are identified by their track ID E1 or E and curve radius. E2 track is non standard full 90 degree turns. Dimensions should be a generous loose fit that should be able to…
Printing on the side orientation with no supports and a 8mm brim in PLA. Should be able to hold your 16 and 8oz Adams detail spray bottles, the opening fits them snuggly. It can be opened up to fit other spray bottle brands but Ive…
Various length straight and adapter tracks that should fit BRIO or similar tracks.
If you have to place two pieces of extruded aluminum on top of each other in a cross pattern this can be used to hold them square in a small footprint and minimal bolting.
This cube is something I remember from my early school days as an assignment. Design a cube that has interlocking segments IE they have at least one “block” distance in X,Y.Z so not truly interlocking in multiple parts (5 segments). Print…
I printed this out of PLA with 20% infill just to give it a quality tool feeling. It has pockets in the base for magnets if you wanted to have this be mounted to a fab/weld table. Tops are optional but add a nice touch. I have the roloc…
I made this from wood filled pla generic normal settings for my M5C with 10% infill and it turned out pretty nice. Fit is loose as I have some very old handmade track that has a wide range tolerances. There are two versions a 1 inlet 3…
I made mine in simple PLA+ 15-20% infill seems plenty if you take care of them and leave it in a garage or shop. Change accordingly to fit your environment. All parts should be able to print with no supports. Mounting should be able to…
I printed this in pla with 10% infill. It could use a little more just from a weight perspective. I tried to print one without supports and it worked but it wasnt great. The one in the picture I printed using organic supports only took a…
Stackable corner shelf. The tolerances on the posts/holes are fairly loose to make assembly easy. You can sack more "tops" on eachother. Printed mine in PLA with 8% infill, used super glue for assembly.
The suffix is the length of each track in mm.
The second version of the ski waxing profile. I was able to print this without supports and get a decent result. I used PETG but PLA might be able to be used with a little more success. Prints in place and with no assembly required. The…
This is a working revision of some Nordic/XC ski waxing profiles. They are for the most part simple to make, and have multiple options for bench mounting and could pack/travel well if needed. Ive used it a few times and its acceptable but…
Polar OH1 waistband clip. This can be used if using the armband isnt conducive or desired. This is a first revision and is functional enough to use or test out. I printed in PLA but PETG would probably be a better choice. Supports are…
Holds common 3/32 and 1/16 electrodes, max stickout for a few common cups and tray for contaminated tungsten. There are recesses in the bottom for magnets if you wanted to keep it from getting knocked off the table. The tray is big enough…
This is for the BMW S54 engine that was most commonly found in the E46 M3. You can use this for mocking up the block off plate or if you really wanted to, to cut/make your own water pump gasket in a pinch since the OE gaskets are fairly…
This is a prototype for an electric water pump conversion for the BMW S54 engine most typically found in the E46 M3. Original files can be found on my grabcad page https://grabcad.com/303.composites-1/models
I made this to hold my child's water bottle and cups off of the bed. Should would in other situations that have walls thinner that 27mm or about 1". Should fit 3" diameter cups. You should be able to print this without supports, print…
If you have a similar drying rack its probably rubbish like mine from the factory. You can fix this broken part if you need to in a few minutes and for a few pennies. Made mine from PLA with concentric infill. Works pretty good so far. If…
Storage space for a few common sized bits. One bar plug is the tool and the other stores them. I made the storage longer so you can add a longer 2" bit and use it for leverage, just note this will reduce the life of the tool and it should…
Should fit a standard 12oz can. There is an airgap that can be filled with material for customizing the feel of the holder and possibly keeping the drink cool.
Printed in petg with 10% infill default settings. The overall height could be lowered for better watering but it works well enough. I found these herbs at my local grocery store so it is probably a standard size. If the containers are…
Printed in 95A tpu, 30% infill. sits a little tall in the key fob but otherwise fits really nicely. No supports needed, under a gram of filament, printed in less than 5 minutes. Hope this helps someone.
A simple multicolor box to keep BMW tool 83 30 0 494 606 safe from getting knocked around a garage or shop.
I made the axle hole a tight fix so the 1/4-20? bolt can cut its own threads into the plastic eliminating the acorn nut. Added a second hold for a 1-1/4" wood screw to ensure it never comes loose again. I just mirrored the part in the…
To wszystkie aktualnie dostępne wyniki.
