Liczymy pasujące modele…
About Just a friendly and sometimes scary spider. Great for decorating a spooky space. Print Feedback Legs don't need supports, but recommend supports for the overhangs on the bottom of the body and head. Might also print more…
About Chocolate chip cookies and a baking sheet. The baking sheet can hold six cookies. Great fun for playing kitchen with the kiddos! Print Instructions No supports needed for either cookies or baking sheet. Recommend printing two colors…
This is a simple Lithopane Lamp with a few sample lithopanes, and a base that can store more. To fit this lamp, lithopanes should be printed at 12cm x 12cm, with a thickness of less than 3mm, but I recommend 2.4 or 2.6mm. The storage base…
About This is a model of a fire hydrant. I made it for my son to play with his firetruck and firefighters. Print Instructions Will need to print with supports. I recommend tree supports only touching the build plate.
Some require supports. Looks good with silk filament.
About This is a lamp of a crystal cluster. While I recommend transparent filament, it also looks great in white filament and glow in the dark filament. You'll need to add light inside that uses a battery. Print Instructions Base does not…
About Megaphone for projecting your voice. Great for sports games and events, or just being obnoxious! Print Instructions Prints with no supports and no brim. Can be easily resized. Timelapse Video
About This is a toy garage I designed and made for my kid. The garage door can open and close. There is a ramp to the garage door entrance. There is a cone to hold traffic cones. (I have a traffic cone model, you can also use). Print…
There are several designs available: Jack-o-Lantern (classic) Dia De Los Muertos Circle Face Spider Oval Opening Heart Suspension Bridge The candle holder versions will have a space to place a tea light candle. The versions without this…
Just a simple toy salt and pepper shaker. I made this for my kids play kitchen. They are not functional.
About Two models of an Anhk. A larger hand size one, and a smaller charm size one that can be used for jewelry or keychains. Print Instructions Prints without supports. Printed well for me with no brim. If you have bed adhesion issues…
About This is a standard pony bead at 6x9mm. It has some slight adjustments to make for easier printing, specifically more surface area on the bottom. This allows the first layer to print with three loops, instead of just two, like with…
About Small pan for your play kitchen. Have your kiddos practice making you a delicious and nutritious meal! Print Instructions Needs to be printed with supports for the handle. Can be easily scaled larger.
Simple toy phone for kids. There is a port for plugging into the phone and a hub/charger. Will need string to attach the two cable connectors together. While not provided, the phone would benefit from a sticker for the screen, as is shown…
Supports may be needed for the base of the body and head. Recommend a brim for the feet.
About A sea star that is realistic looking and can be used for decorative or educational purposes. Enjoy! Print Feedback Can be printed flat on its back, but I recommend small layer lines to capture the details of the texture. No supports…
About Customizable pencil topper that's compatible with standard building blocks. Three models available. Print Instructions Supports aren't needed. May benefit from a brim, if you have bed adhesion issues.
About A toy wok for play cooking. I made this for my kid's play kitchen. I hope you enjoy making a yummy stir-fry! Print Feedback Supports are needed for the handles and some of the base in particular.
This is a pretty straightforward print. No supports are needed. I had pretty good success printing a batch of these on my X1 Carbon.
About A fake book with a hidden compartment. I printed the book cover on a standard 8.5x11 size sticker page and trimmed it to wrap around the entire outside. Print Instructions No supports needed. Print the outside cover upright, and the…
About Easy and simple cover for electric power outlets. Print Instructions Two pieces to print. No supports required. The two holes in the main cover piece are made a little larger to ensure the prong piece fits through them. The cover…
Just a top for a mason jar with some breathing holes. This is for using a mason jar to hold bugs or plants.
Various award medals with generic text like “champion” and “winner”. Recommend printing with supports, and any infill setting seems to work fine.
This is a pretty simple and standard plant pot. The model is about 5-ish cm, but it can be easily scaled to fit any plant. I printed with supports. I made this in OpenSCAD and it's available here:…
I made this specifically in mind for my New 3DS XL and 2DS XL. I wanted the stand to allow access to the audio output on the bottom of the 3DS. I put in a tray for my larger stylus, but it also works to help route an audio cable. Print…
About A skeleton key made for my kiddo's playtime imagination. Print Feedback No supports or brim needed. I recommend at least 3 wall loops for strength.
About This can hold either golf balls or ping pong balls. There is a sight window to see how many balls remain. Print Instructions Supports are needed. I recommend tree supports, only touching the build plate. The model is very tall at…
About With these flower cookie cutters, you can make beautiful bouquets and floral arrangements with play dough, clay, or putty. I made these for my kid and niece, as they kept requesting more of them! Print Instructions Print upside down…
The backside is flat and intended to be printed with that side on the bed. No supports needed.
About Little toy battle ship inspired by World War II era battleships. Print Feedback Supports are needed, and I recommend tree supports. No brim needed. Looks great in silver or gray filament.
Two models for each sign. They can be used separately, or glued together back to back. The signs have two holes for hanging. Can be printed with no supports. Update: I made another model for the sign that added "please".
About An assortment of 16 different beads. It has a good variety of shapes and sizes. The hole size for string is approximately 2mm. I made these as an activity for my kid to make necklaces and bracelets. Print Instructions No supports…
About This toy has a classic spatula design for playtime cooking and fun with the kiddos! Print Instructions Prints without supports. If bed adhesion issues occur, recommend just trying an inner brim first.
The bottle is two pieces that will fit together. My prints were pretty snug and the two pieces fit firmly together without much worry they'd come apart. If you want them to be extra sturdy, you can always super glue them together. If you…
About Four different bottles and caps. All caps are interchangeable with all the bottles. Do not actually drink from these bottles! Print Instructions Everything can be printed without supports. I successfully printed with no brim. Caps…
About Traditional and proven ashtray design. Keeps your space neat and tidy and ash free. Print Feedback Easy print! No supports and no brim needed. I recommend PETG or better, using a protective clear coat spray post print, and consider…
Prints well without supports. Can be pretty easily resized for your preference.
About A magical staff for wizards and mages. The great thing about this print is you can make the staff different sizes, by adding or removing middle rods. Create a long staff by using five middle rods, or skip the middle rod entirely and…
Only the heart gem for the top seems to need supports. No supports needed for the remaining models.
No supports needed. Recommend AMS or swapping filament for different color for the text.
About This is a baby octopus and can make for a good bath toy or just a decoration. Have fun! Print Feedback Just needs some light tree supports for the mouth. No brim needed.
About Toy cooking grill with working knobs and removable grate. The flames can also be removed and added for when the burner is on and off. I made this for my kiddo's play kitchen to help him play cooking. Can't wait for him to cook me a…
About Holds a full standard box of tea bags. There are slits on all four sides to show how many tea bags are left. There is a display to place a single tea bag, so you know what tea you have in the holder. Print Instructions Some supports…
About Bracelet bar display for holding bracelets or watches, or anything else round. I made this for my niece to hold all the bracelets we'll be making. The OpenSCAD file is also available on my GitHub, so you can customize the size and…
About Simple pizza saver to stop pizzas from getting squashed. I mostly made this for my kids play kitchen where we have a pretend pizza shop. I don't think I'd recommend this for actual food, especially not for reuse. Print Feedback No…
Print two of the handle model. No supports needed. Must be glued together.
About Set of six cookie cutter shapes for play dough and putty: Star Circle Sqaure Triangle Right Triangle Pentagon Print Instructions Print upside down with no supports. For me, it printed fine with no brim. More Models
No supports required, except for the topper. Recommend printing stronger inner rods with a high infill.
Prints without supports. Recommend AMS or switching filaments after 3mm.
About This is an adjustable armrest with a small table space and beverage holder. Print Instructions Supports are needed. Print the top and bottom pieces on their sides. Recommend three or more walls for extra strength, and to use PETG.…
Supports are probably needed for some of these.
You'll need to print the base and two of the vertical holders. I printed all three at once on my Ender with no supports. You'll need to glue the two holders into the base. I recommend printing the vertical holders on their side. Cura can…
There is a solid print for one color. I also separated them into three pieces that can be printed different colors and then assembled. Recommend a thick print for the pegs.
This can be printed with no supports. Print four of the legs on their sides. Recommend printing with thick walls and infill so it's strong enough to support more weight. Recommend gluing the pieces together. Recommend only using on carpet…
Prints without supports. Two versions: a solid version that can be printed as one single model, and a two model version with the pentagram and circle separate, so they can be printed with different colors and then glued together.
About Shadow puppet of a person with six different expressions: Confused Happy Neutral Surprised Worried Waving Print Instructions No supports needed. May benefit from a brim, if you have bed adhesion issues. Recommend to print in black.…
Usage Raspberry Pi 4 drops in the base with no screws needed. The base and outer case snap together. To more easily remove the outer case from the base, there are three tabs on the base for your thumb and fingers to hold, and with the…
No supports needed. Best with AMS for multiple colors. I made this model to be small (32x64x2.6mm), so it can easily be scaled to be larger. Works great as a keychain too.
The mid section and tips should be printed vertically upright. To help make this STRONG and not break so easily, print the internal bars horizontally. No supports needed. Must be glued together.
About Two models available, a low profile and a high profile. They can be used separately or paired for different display options. Print Instructions Print on the side. No supports needed. I successfully printed with no brim.
About This is a sleek and minimalist laptop stand. It has air vents and helps keep a laptop cool. Works great for raising screen height. Print Feedback Print upright. No supports needed. Easy print!
Print And Assembly Feedback No supports needed, except for the gems on top. Brim may be helpful. Must be glued together. Recommend AMS or even just switching filament for color. Customizing The length can be extended by simply printing…
No supports needed. Print 20 sticks and 25 balls.
About There are six space themed models for shadow puppet story telling. Alien Rocket ship Satellite Observatory Shooting star Planet with rings Print Instructions No supports needed. Brim may be helpful, if you have bed adhesion issues.…
This model requires 3mm x 12mm magnets that insert into the back. They fit pretty snugly for me, but I still used a drop of super glue. It can hold up to 5 magnets, but you can use less if it's not needed. It also requires a 2 inch binder…
No supports needed. Overall physical dimensions of the ruler are a bit longer, but the notches and written measurements reach 16 cm.
About This trident staff is not sharp, and has rounded edges. It's intended for a cosplay prop or kids toy. Print Instructions and Assembly Supports are needed for the trident. The other models benefit from a brim, and I recommend at…
About Staff for wizards, witches, and mages. Wonderful addition to fantasy cosplay. Print & Assembly Instructions The crown is the only piece that requires supports. Print it upside down. Print two of the middle end pieces. All shaft…
About Porcupine pen holder that holds 26 pens. There are two versions, one with 15mm and another with 10mm holes for placing the pens. I made this for my son when he does schoolwork. Print Feedback Supports needed, and I recommend tree…
Both paddle models need to be glued together with the handle. One side is flat and the other has pips. The flat one is the easier print and you can always print two flat ones, if preferred. No supports needed. Must be glued together.
About A mega building with a futuristic and brutalist look. I made this for the backdrop of cyberpunk and robot toys. Print Feedback Very light supports are needed, and I recommend tree supports. The base is thick, so no brim should be…
About Cute chubby cat to decorate your space and keep you happy! Print Feedback Some light tree supports are really helpful. The base is pretty big, so no brim should be needed. Otherwise, it's a pretty easy print!
No supports needed. Recommend AMS or swapping filament for coloring top layer.
I printed with supports for the magnet holes. If you're printing several of these and want them all to stick together, be sure to put the magnets in correctly. The heart takes two magnets, so put each magnet in with opposite polarities…
About Cute little ghost for a fun and spooky time! Print Feedback Print with no supports and no brim. Can be easily scaled larger. Still looks great printed with just one color. I recommend glow in the dark filament. Easy print!
Probably not good for actual use. More of a gag gift or novelty item. Needs to be printed with supports.
I printed with tree supports and it worked pretty well.
Suggest gluing two 1cm googly eyes. Painting, swapping filament or AMS suggested. No supports needed.
About Dumbbell holder to hold your dumbbells! There are two versions, a 12cm and a 10cm version; choose one or the other. This is in reference to the length of the bar/handle. Print Feedback I recommend printing with multiple wall loops…
I made the height slightly lower than the card, so they're easy to get out by grabbing from the top. Print without supports.
About The regular Grand Scepter is 28" tall, but can be customized to be longer. It's intended for a cosplay prop or kids toy. Print Instructions and Assembly Supports are needed for the gem. The other models benefit from a brim, and I…
About Five shadow puppets to tell the classic story of Little Red Riding Hood. Print Instructions Easily prints with no supports. I was able to print successfully with no brim. May benefit from a brim, only if you have bed adhesion…
About This is a wall-mounted plant holder with various styles. I made it for the missus. She's a plant lady. The OpenSCAD file is available for customization: https://github.com/ClassicAdam/wall_mounted_plant_holder Print & Usage Feedback…
About A set of five different napkin rings for your fancy dinner parties! Print Feedback Easy print! No supports or brim needed. Brim may only be beneficial if you have some bed adhesion issues. Looks great with silk and metal color…
No supports needed. Recommend printing in multicolor, if you have it. Otherwise, you can stop the printer when the bottom card finishes, change filament to another color, and print the top layers of text with the different color.
Prints without supports.
About A hard boiled egg half with a magnet version allowing the two halves to be held together as a whole egg. I made this for my kiddo's play kitchen! Print Feedback The magnetic version takes a standard 12x3mm magnet, and the two pieces…
About Rocket ship with a removable top that screws on/off. I made this for my kid, so they could put all their space themed toys inside and blast off! Print Feedback No AMS required. No glue required. Everything screws together. The side…
About Invest in gold and silver! Great prop or toy! I recommend silk filament. Print Feedback No supports and no brim needed. Easy print!
I just asked ChatGPT to generate an artistic representation of A.I. and was provided this: A central node with surrounding nodes connected by cylinders, representing the interconnected nodes of a neural network. An additional layer of…
This a fridge magnet that takes a 3mm by 12mm magnet, and has a loop to tie or hook things. The hole is the right size for a KNEX bar, so those can also be used. There are two pieces to print. I attached both the magnet and two printed…
About This is a low poly bunny. I made it for my kiddo! Print Instructions No supports or brim needed. Default settings of most slicers work pretty well. May wish more wall loops to have stronger ears. Can be easily scaled to different…
No supports needed. Recommend AMS for color.
Base needs supports. Blades do not need supports. Print 3 blades to be glued into base.
No supports needed. Must be glued together.
