Liczymy pasujące modele…
Update May 2025: Fixed a bug in the parametric fusion 360 file. It seems that with a Fusion360 update a bug was introduced in the application, that lead to the boxes being broken when the height was changed. I repaired a few steps in the…
This is a remix of the gridfinity baseplates by josh.hall - https://bit.ly/JHGridfinityBaseplates who did an awesome job with his version of the baseplates. Versions The modular baseplates come in two versions: Baseplates that can attach…
New (September 2023): For those who don't want to use Fusion360 - there are now .step files for all boxes from 1x1 to 10x10 available. This is a remix of the original bins by Zack Freedman that you can find here:…
When stacking several bins on top of each other it can be a bit tedious to access the lower bins. Especially when you place the bins in a box like in my IKEA Samla Gridfinity series (…
I love the gridfinity system started by Zack Freedman and the design idea of easy accessibility and of displaying the stuff that is stored, rather than store it away. With my Gridfinity Ikea Samla adapter (…
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. The box holds 6U high bins…
NEW - now available for clip together baseplates If you want to save some filament on this print I added a version that uses my clip together baseplates https://www.printables.com/model/633086-gridfinity-clip-together-baseplates/files To…
Now available: The clip together grid shown in the pictures of this model: https://www.printables.com/model/633086-gridfinity-clip-together-baseplates ------------------ Gridfinity Tiles. I have quite a lot of drawers equipped with…
Catch-All trays are great. But having the choice is even greater. So I designed a modular catch-all tray. The base For the base I used my modular baseplates remix for the Gridfinity system (…
I love the gridfinity system started by Zack Freedman and the design idea of easy accessibility and of displaying the stuff that is stored, rather than store it away. But I felt that until now an easy way of transporting more than a few…
This is a remix of the original bins by Zack Freedman that you can find here: https://bit.ly/ZFGridfinityDividerBins Outer dimensions of the bins are exactly the same as the original bins, so you have full compatibility to the gridfinity…
This model is based on the Gridfinity baseplates by Zack Freedman. You can find the original model here: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Baseplates-60925 I really like my version of the Gridfinity modular…
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. And for all Voron lovers out…
When doing a print that is only a few layers thick, I am alwas amazed how flexible the printed plastic is. Almost as flexible as paper. I wanted to design a model that uses this flexibility for quite some time, but never had a good idea.…
This is a remix of the “Rugged Box (Parametric)” by Whity with the inner parts of the “Gridfinity Storage Box” by Pred , that comes with a variety of Gridfinity bins to hold the E3D Revo parts. When I saw the “Prusa (Tools) Rugged Boxes…
I love the gridfinity system started by Zack Freedman and the design idea of easy accessibility and of displaying the stuff that is stored, rather than store it away. But I felt that until now an easy way of transporting more than a few…
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. This edition contains a lid…
Deck Panel Cover I love the hexagonal MidPanel by Zen3D, but wanted to have this cool pattern not only on the mid panel but also extended to the deck panel. My mod is just an aesthetic mod, that does not add any functionality, besides…
I wanted to have taller skirts on my Voron 0.2 so i could place the electronics on the bottom. To achieve this I made the feet taller and adapted the skirts. The skirts have roughly the same heigt as the skirts of a V2.4 or Voron Trident,…
For the Get creative with WAGO contest I thought it would be cool to have a case that houses a d1 mini esp8266 development board and Wago connectors to do the test setup instead of a breadboard. You need to print the following files:…
I love the design of the mid panel with hex pattern by Zen3D and wanted to have it for my V0, too. Then I found the Modesty Mesh for Voron Zero by MapleLeafMakers and thougth that these side panels for the electronics compartment would be…
I love my Omnifixo clamps. They are so far the best third hand I have found. But for clamping some objects it would be helpful if the clamps could be on different heights. Sure, you can stack the yellow parts of the clamps, but as there…
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. This edition contains a lid…
I wanted to have a custom motor panel for the PG7 cable gland (M12) and for the cables for my chamber LEDs. Top view Bottom view
I equipped my IKEA Alex drawers with Gridfinity grids, but I found that bins placed at the back are hard to access since the drawers don’t fully extend. Storing only rarely used items there seemed like a waste of drawer space, so I…
Revo Nozzle Holders I made two version of Revo nozzle holders to go with my remix of the E3D Revo Gridfinity Box ( https://www.printables.com/model/581066-e3d-revo-gridfinity-box ). One version is flat, fitting perfectly in the box and…
I wanted to have the upper rear panel printed and with a two color Voron logo on the back. The panel is 3mm thick. Keep in mind that you might want to change the thickness based on how thick your acrylic panels are. To print with color…
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. This edition contains a lid…
A small chopping board for a play kitchen for children. Recommended to print with 100% infill.
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. This edition contains two…
I used this cool mod to extend the height of the tophat of my Voron 0.2: https://www.printables.com/model/421883 But I did not want to order new panels, so I designed a printable extention. I added a light hex pattern for a nicer look.…
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. This edition contains a lid…
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. This edition contains a lid…
I loved the idea of the coin cell box by @mac310, but I also have a few LR1130 that I wanted to put in there. Fortunately they have the same diameter as LR44 so I only needed to change the depth of the slots. I also did a few more…
I made a custom gridfinity box for 5x20mm cartridge fuses. The box holds 20 fuses and the fuses are easily accessible. The boxes are stackable. Design The cartridge fuses always remind me of the TMNT ooze canisters from the 90s movies. So…
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. This edition contains a lid…
I adapted the Guile mini RSCS fan mod by https://www.printables.com/@thrutheframe to fit an EBM Papst RLF-35 fan. Print with standard Voron Settings. STLs are already oriented correctly for printing (step files have to be oriented…
We often use the vegetable slicer accessory of our Bosch MUM 6120 kitchen appliance. Unfortunately one of the twist locks that holds the cover of the slicer securely in place broke. This basically makes the whole vegetable slicer…
To wszystkie aktualnie dostępne wyniki.
