Liczymy pasujące modele…
This is yet another Samsung door mullion repair piece. There are a couple designs out there, and this is my attempt. This is the flipper that closes the center door flap on several Samsung refrigerators. It fits quite well, I've installed…
Summary The original model of this was very well designed, but incomplete. I just made the finishing touches. Needed materials: - https://www.amazon.com/gp/product/B0776PY5JK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 -…
I was asked by a friend to make this gear. I created this model from the broken gear, so I don't know anything about where this is located or how to replace it. It may fit other Spirit Halloween products. I was told that the gear worked,…
This is a leather lace and strap splitting tool. It takes a standard utility knife blade. You'll also need two M3x14 (or longer) screws and two M3 hex nuts. You can adjust the thickness of the leather by choosing between the 2 different…
This is a holder to mount your Onn 4k Streaming Box to the back of your TV. There is a flat spot on the back for 2 sided tape to mount it.
If you'd like to build a fast Pinewood Derby car, one option is to build what's known as a “Rail Rider”. The car is built so that 3 wheels make contact with the track, and the 4th (a front wheel) is installed higher up on the car so that…
Stands to keep your RC crawler off the tires. Adjust length of cross support in your slicer, if needed. Can use M3x10 screws to secure the cross support from bottom of the stand, but cross support fits tight without the screws.
My one and only complaint about this knife is the location of the pocket clip. When I pull out the knife, I like it to be in the orientation that it fits into the hand for use. This mod will swap the clip to the side that puts the blade…
Things needed: -Printed parts -Optional 1/2" switch. -4 M3x20 screws -3 M3x6 screws -Wire -2 Red piggyback spade terminals (…
A bit holder for Bauer cordless tools. This holder fits the right side of the tool, print this in a mirror image to fit the left side. Install using an M4x10 cap screw.
These are fenders for your pinewood derby car. Cut your block of wood, install the wheels and super glue these to your car, being careful to make sure there's enough room for the wheels to spin freely. Enjoy!
There are 2 versions. One is solid, just print it and use it. Second version has an empty space in the middle for a 3/8"x8" Lag Screw. I put it into my print because they're cheap and I had one laying around. You'll have to pause the…
This is a 22LR bullet holder that can be mounted anywhere you can find space. There are 2 versions. One with screw holes and one without. They can be mounted with screws, double sided tape, Velcro, M-LOK rail (with the right hardware), or…
This is a remix of a winter hat knitting loom. I found the original design works well for child size heads, so I made this remix for adult size heads. This is a rather large model, so you'll need a printer that has at least a 250x250mm…
Turn your bits into a screwdriver. This is a 1/4" bit holder handle for Wiha and other long bits. Bits are designed to fit very tight, so that they won't come back out. You'll need a clamp, press or bench vice (or whatever method you can…
A driver for installing 24mm Allen Bradley switches or anything else that uses a 12 point 24mm socket.
This is a tool for making decorative bows out of ribbon. This an example of how to use it. https://www.youtube.com/watch?v=RgiKGOrdBtU Wired ribbon works best.
These are retainers for holding wire into type G and H Panduit wireways. If you have ever worked with these wireways before, you know how annoying it is when wires won't stay put. These aren't as fancy as the ones made by Panduit, but…
Same as original but with an added handle. Print both pieces, and assemble using the dovetail. Finish using original design.
A lamp shade for standard A19 light bulbs. Sure, it'll fit other bulbs, but I designed it around a standard A19. The opening at the base is 36mm. The shade looks really good when printed in fuzzy skin mode.
These are twist lock fidget spinner caps. They hold quite well into fidget spinners that take 608 bearings. Just print 2 and push them into your fidget spinner. They will twist as you push them into place and are very difficult to remove.
This is an SG22 6" extended handguard and barrel nut for airsoft.
The factory hub carriers have a design flaw where they don't have enough material to screw into, so they strip out easily. I printed these while waiting for new ones to arrive in the mail and they held up fine for a couple days, but I…
Missing your Scotch tape dispenser spool? Just print this. All you need are two m3x10 or shorter socket head cap screws.
This fits several different Ford models. This replaces your aux input panel (Ford part # CV6Z-19C149-A) with more useful USB chargers. These are PD 3.0 and QC 4+ compatible, so they will charge devices very quickly. I recommend printing…
This is a magnetic bit and hardware holder for DeWalt cordless tools. You'll need three 10x3mm round magnets. Enjoy!
This is a Compaq Presario CQ60 (maybe other models too) hard drive cover. I purchased this laptop for cheap, but it was missing the hard drive cover. Without knowing what the original looks like, I designed this cover. So far, it's worked…
I built this timer for our specific purposes, but thought I would put the files up for anyone who wants them. This is by no means a complete project and will take some creativity and tinkering to make it work. The timer is for a 4 lane…
Repair deflector elbow for Dewalt vacuums DCV580 and DCV581H. There are 2 files. One is for using the original screws that came with the vacuum. The second file is for using M3 heat inserts and M3 screws for a stronger connection.
To wszystkie aktualnie dostępne wyniki.
