Liczymy pasujące modele…
This model contains complex overhangs, long bridges, thins walls and small details that can be very hard to print. Can be printed without support on a well tuned printer. print instructions 0.2 mm, 5 perimeters 30% infill 100% fan 100mm/s…
replacement battery door and latch for the canon A-1 and AE-1. model is not optimized for fdm printing, needs a lot of support material and post processing. i will probably upload a optimized model in the next few months or so. part as…
print without support. insert 6x or 12x M3x5x4 heatset inserts into the center piece. use 6x or 12x din 7991/ISO 10642 m3 fhsc screws (8mm when using 6 screws, 4mm when using 12 screws) to screw both sides onto the center piece.
Portable ro filter. Should fit most 50mm and 60mm filters. I used this one . All parts are pre-orientated and most of them can be printed without support with the exception of tubehook, this part needs a small amount of support. Pass…
parts needed 20x m3x16(or m3x12) hex bolts 4x m3x8 hex bolts 24x m3x5x4 heatset insert (optional) 1x ikea GRÖNÖ some felt or some rubbery material to put on the bottom (i used a old mousepad)(optional) some superglue printing guidelines:…
fd to ef mount conversion for the Canon FD 135mm f/2.5. just a simple remix of the original, it now has room for the ef locking pin and the holes on the side have been covered. print settings: material: abs/asa (petg is probably also…
no support needed. use a m4 tap to cut threads into the small hole, use a short m4 grub screw to secure it to the recorder. i have installed this knob on my akai GX-215D and 4000DS mkII, should work on some other machines as well
universal macro bellows, lens and body mounts can be easily swapped out. belt drive for fine tuning magnification . currently supports ef and ef-s body's and fd lenses. mounts can be easily swapped out, if you want to use a different lens…
pump cover for the cooler master elite liquid AIO features swappable inserts 8 different insert designs a empty insert so you can make your own heatset inserts for durability(optional) improved snap fit hooks for easier printing and extra…
parts needed 20x m3x16(or m3x12) hex bolts 4x m3x8 hex bolts 24x m3x5x4 heatset insert (optional) 1x ikea GRÖNÖ some felt or some rubbery material to put on the bottom (i used a old mousepad)(optional) some superglue printing guidelines:…
print without supports. included are 2 versions, the first one uses M3x5x4 heatset inserts, the second one has a hole that can be tapped for m4 screws. i use a small m4 grub screw for mine but regular screws should work just fine.
To wszystkie aktualnie dostępne wyniki.
