Liczymy pasujące modele…
pH or ORP probe pipe-drilling / holder. It is designed to keep probe safely in the water. Should be mounted behind filtration system but before heater and any chemistry injection system also. Easy to use, just drill hole into the pipe…
By my opinion raft-only (sheltie-raft only.stl) version is tough enough, choice is yours. Verze bez střední kruhové výstuže se mi zdá dostatečně pevná sama o sobě. Printed with PLA (0.2) Infill doesn't matter, 10% - 15%
2"/D50 pipe fitting for probe/sensor/injector holding onto pipe. It has been made with two typical pipe-threads - G1/2 and G3/4. You can look into my other models, where you can find temperature probe sensor shaft for this fitting or…
This lid is designed for any different purpose, but not high temp preservation, obviously. It can help to protect the loose material stored inside the jar dry and safe. For liquids, change the printing material to PET/G, ASA and so on.…
Creality provides silon-bed-blocks set where is mix of 3x16mm and 1x14mm. I made taller spacer for this last 14mm block.
Swimming pool water temperature monitoring needs a sensor whitch musnt be in contact with the water. Threfore you have to use a shaft, where you put sensor probe in. I made one for you. It has stadard outher thred G1/2 and also metric…
Remixed holder for pool-cleaning stuff. My modified model can be mounted on a wall or a fence, as you want. Printed from PETG (because of sun/water resistance): 0.2mm layer hights Infill 35% or more support: not needed Use three M5x30…
Three slot organizer for things we leave lying around on the sink. Finally, these things will get their place. Center container is in three variants. One minnor issue - left and right containers are not swapable in between them selfs.…
Brighten up your parties, corporate events or balls with a stylish decoration - an IKEA table lamp with a glowing table number on their top. Brighten prepared places for all your guests. IKEA STRALA is tree-shaped portable table lamp, you…
I haven't found it to buy separately, so I had to recreated it according to the design of the original part. To avoid complex support builded under the print, I desided to split model into two pieces, so you gonna need one screw (M3+) to…
Was designed as a copy of original piece. Small but useful device. Printed: PLA (PETG/ASA could be better choice) Infill 15-20% No support needed
Push handle for this kitchen slicing machine. Designed with respect to the original one - minor changes witch can be simply ignored (no improvements). Vytvořeno podle originálu jen s drobnými nepřesnostmi, které lze ignorovat v rámci…
A small but useful device, allowing direct connection of the blower to the winter-pillow inlet, witch allowing you hands-free air filling. pla/petg infill 25% randomize seam print with support (touching build plate)
Brilix FSP spare-part. Although, the price of the original is not high, it is easier to print the part by your own. While you remove the manometr from the head of filtration after every season, you will need a replacement nipple quite…
30mm tall installation box for mounting Partizans camera on a vertical surfaces, designed to cables stored hidently and securly as well. Designed and tested on the IPD-VF5MR-IR model. May also fit to other models of this brand. 30mm…
If you have a washing machine in a corner, it probably hits the wall while spinning. I have created a simple damper that prevents the washing machine hitting the wall. It is attached with three 10x2mm magnets. It can be removed at any…
3D model generated from map data
The assembly kit consists of 4 printed parts of the mounting bracket that I modeled and a metal (Al) T-shaped profile, 30x30:3mm. This creates a solid frame that can be easily mounted on the roof grid. I assemble the roof grid from two…
Modeled according to the original - shoda s originálem. Printing instruction: material: PETG or ASA (better choice) Layer hight: 0.14-0.16mm Support: Tree-Slim Raft: yes, 2 layers min Print angle: cca 30% Infill: 25% and more Perimetrs: 4
Drain pan size 250x250mm with 32mm pool garden hose connection. Ideal place is under a garden water connection. The pool hose connection ensures quality drainage without the need to disassemble the waste or monitor the hose. It can also…
Holder only - in two diameter sizes! Used to attach the original sink overflow cap. No need to buy the entire cap (set), just replace the damaged holder with a printed one. Jde pouze o držák (dva různé průměry). Slouží k uchycení…
Spare part for repairing the pool vacuum head. Spring can be used from a pen, but need a bit of remodeling. Náhradní díl pro opravu hlavy bazénového vysavače. S trochou pomoci lze použít pružinku z propisky. Printed instruction: Material:…
Roof part of the left articulated joint. Created by copying the original craced part. levý díl kloubového spoje ohybu střechy kočárku. Vytvořeno na základě opisi originálního dílu. Printing instructions: Printed: upside-down Material:…
Simple mailbox with dimensions of 30x8x8cm. Designed for receiving standard mail incl. magazines and newspapers. Not intended for larger shipments. Mounting kit on a solid surfaces included. Connection of those parts using standard…
Náhradní kryt světla kabiny vozidla A15 (hasičský speciál). S jeho aplikací je důrazně doporučen přechod na LED žárovku namísto klasické tepeplné baňky. Instrukce k tisku: průhledný materiál PETG/PLA (ASA) výška vrstvy 0.16 a níže (z…
To wszystkie aktualnie dostępne wyniki.
