Liczymy pasujące modele…
Custom log/driftwood shaped cave for fish, shrimp or reptiles. 20.5cm X 6cm X 7cm. I kept this design with a complete bottom and one closed off end unlike some of my previous designs; the thought is that it could function as a pleco…
Custom Rock shaped cave with two entries for fish, shrimp or reptiles. ~25cm X ~21cm X ~14cm. Yet another textured rock cave, what can I say, my fish like them! I've included a version without holes for aquascaping or if you would prefer…
Large (as large as my printer allows) wood textured pleco (or any fish, shrimp or reptiles) cave. 20.1cm X 8cm X 6cm. Designed with 2mm walls and meant to be printed with 100% infill and no supports; thin walls in design make it…
Large (as large as my printer allows) multiple entrance wood textured cave. ~15cm X 12cm X 20.9cm. Designed with 2mm walls and meant to be printed with 100% infill and no supports; thin walls in design make it unsuitable for significant…
The make is made of 6 panels, 3 wide by 2 tall for a final product of 24 inches wide by 16 inches tall This uses an improved panel system as compared to my previous background ( https://www.thingiverse.com/thing:3509102 ). A double sided…
A new background using an improved panel system (4 foot x 2 foot size made of 8 x 8 inch panels with alignment biscuits) can be found here: https://www.thingiverse.com/thing:3564970 A "proof of concept" double sided aquarium background…
Custom Rock shaped cave with two entries for fish, shrimp or reptiles. 22cm X 20.7cm X 14cm. Designed with 2mm walls and meant to be printed with 100% infill and no supports; thin walls in design make the object unsuitable for significant…
Custom Coconut shaped cave for fish, shrimp or reptiles. ~15cm X ~15cm X ~9cm. Designed with 2mm walls and meant to be printed with 100% infill and no supports; thin walls in design make the object unsuitable for significant re-sizing…
Custom Rock shaped cave with two entries for fish, shrimp or reptiles. Designed with 2mm walls and meant to be printed with 100% infill and no supports; thin walls in design make the object unsuitable for significant re-sizing. PLA and…
A modular brine shrimp hatchery: clip multiple units together and run them with a single air pump with a line splitter for a constant supply of fresh brine shrimp. the base is large enough to accommodate 2L soda bottles when multiple…
Aquarium airline restrictor to slow or cut off the flow of air from air pumps, useful for: Brine shrimp hatching Raising fish fry Drip acclimating Slowing sponge filter flow Etc. Prints without supports. Sized for 6mm O.D. airline tubing…
Custom Rock shaped cave with two entries for fish, shrimp or reptiles. 25cm X 21cm X 15.6cm. This release include a version with and without holes (more natural for aquascaping). The version with holes was designed to accommodate large…
Small wood textured pleco (or any fish, shrimp or reptiles) cave. 15.3cm X 4.6cm X 3.5cm. Designed with 2mm walls and meant to be printed with 100% infill and no supports; thin walls in design make it unsuitable for significant re-sizing.…
I was very happy with cudatox's design but needed it to work with 5/8" hose, so here is my remix. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 20% Filament: Any PETG Any Notes: Print…
Custom Rock shaped cave with two entries for fish, shrimp or reptiles. 14.5cm X 10cm X 6cm. Designed with 2mm walls and meant to be printed with 100% infill and no supports; thin walls in design make the object unsuitable for significant…
2 different textured rock piles with cutout entrances for fish/shrimp to hide in. Designed with thin walls to keep printing costs down. scaling down shouldn't exceed 50% or the walls will become very thin. Both options are printable…
A magnetic fear tracker for Daggerheart in the style of birds perching on a rooftop. Prints with minimal supports, only the bird magnet holes require them. Ravens often represent tricksters in mythology, which makes them seem appropriate…
Custom Rock shaped cave with two entries for fish, shrimp or reptiles. 25cm X 20cm X 14.3cm. Designed with 2mm walls and meant to be printed with 100% infill and no supports; thin walls in design make the object unsuitable for significant…
Custom Rock shaped cave with two entries for fish, shrimp or reptiles. ~10cm X 7cm X 5cm. Designed with 2mm walls and meant to be printed with 100% infill and no supports; thin walls in design make the object unsuitable for significant…
Custom Rock shaped cave with two entries for fish, shrimp or reptiles. 20cm X 12cm X 7cm. Designed with 2mm walls and meant to be printed with 100% infill and no supports; thin walls in design make it unsuitable for significant re-sizing.…
A case designed to fit an STC/ITC-1000 temperature controller and electrical outlet. Prints support free. Designed with slots to friction fit a Type B electric outlet (decora style). The lid is intended to be held in place with #8 wood…
Suitable for printing with any filament at any detail level without supports. the numbers are recessed for ease of painting of multi filament printing.
I'm never a fan of having to pick up additional hardware for prints, so instead of ordering a bunch of springs, I threw these together. Print in TPU for best results. Printing in PETG should also work but i would recommend scaling to 67%…
Aquarium lid handle, attach to lid using silicone for a secure hold. Print file as oriented for maximum strength, no supports needed. I recommend printing in PETG or ABS for long term durability, PLA should also work fine. Print Settings…
A tool designed to make placing root tabs easy and with minimal disruption to the substrate. The design includes a threaded and removable tip so you can cheaply and easily use the device for multiple sizes of root tabs. The provided tip…
Low profile "bulkhead" style screw in place vents for terrariums/vivariums. The mesh features 1.2 mm holes with 0.8 mm ribbing. Both the insert and nut have M28 threading with wide tolerances for easy printing. The low profile design is…
Small 12cm x 6.5cm x 10cm hollow rock shard aquarium decoration. if placed on it's side, it can act as a fish cave (vetical it would make a decent Comp/Calvus cave) Designed with 2mm walls and meant to be printed with 100% infill and no…
A simple aquarium plant rooting aid, 10.5cm x 3cm x 1.6cm. Tie or glue the plant to the raised portion of the grid; the lower portion and filled squares are for weighing the structure down with substrate. The grid shouldn't impede root…
Designed around the Army Painter's dropper bottles with space for 24 paints. Usable stationary or add a 608 bearing and the base model to make it spin. Print as oriented without the need for supports.
A distance ruler for gridless TTRPG gaming, designed for Daggerheart but with standard units on it as well for other TTRPGS. Measures out to “Far” distance (60 feet), anything beyond the ruler is “Very Far” and off the game board is “Out…
I've tested it in both PETG and Woodfill PLA, it's best to start by printing 1 leg section and 1 pin to test the fit. Pins should slide in easily and allow the leg piece to spin freely. If it is not working, try adjusting the extrusion…
Replacement blade that fits thetford C400 series toilet. The post is redesigned as a solid cylinder (rather than fins) to add strength. Print in PETG or ABS for longterm use, PLA should also work but will degrade over time (possibly…
Siphon end for standard aquarium airline tubing (3/16" aka 5mm) in two diameters. Both options are 15 cm long and print without supports with 0.8mm walls, so they will print solid with 0.4mm nozzles regardless of infill settings. the 3cm…
Cover the unsightly writing and blue and red plastic on the head/dial end of the heater. Prints support free as oriented and requires no post processing.
Fitted to the NICREW ClassicLED G2 light and designed for shelf-mounting with two #8 screws. The mount ends slip easily and securely over the light casing with no modification needed. Once screwed in place, there is enough flex in the…
Designed in 4 pieces oriented to print for highest strength. The pieces slide together with tight tolerances and require no other parts or glue. Mounts to the back wall or the combine using the existing bolts. Print Settings Printer…
Simple box for holding 6 inch copper ties. Designed to be mounted on the right hand side of the sample collector (door adjacent). Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: No Resolution: .2…
Containers for holding 6 inch copper ties and zip ties on a Wintersteiger Classic or Nurserymaster combine. Models include 2 holes for mounting as well as an adapter if the combine does not have holes in suitable locations. Print Settings…
Robust hook for holding sample tags on a Wintersteiger Classic or Nurserymaster combine. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .2 Infill: 20-50% Filament: Any PET or…
To wszystkie aktualnie dostępne wyniki.
