Liczymy pasujące modele…
My kids wanted a extra-wide sieve bucket for their CAT excavator (Bruder no. 02483), so I remixed the existing one as indicated. Print either oriented as-is, or with the opening facing upwards, in both cases with organic supports. In the…
This is a remix that combines the features of the two remixes it's based on: Makes the head rotatable by hand Adds some structure so parts of the base don't detach so easily from the build plate I just merged things in Blender, credits go…
Slightly modified version of original, as that one would detach on my glass-bed equipped printer every time. Added a scaled cube with Blender that extends the bottom layers from 3 thin lines to one rectangular area.
Remix of https://www.printables.com/model/489585-cute-stylized-dinosaur-toy. Added ellipsoid cavity in the neck, resulting in ~twice the number of walls in that area, so it's less likely to break. Model otherwise looks the same from the…
This is a remix slightly adjusted to print easier by making the two originally very thin strengthening struts at the bottom much wider. Before this change, print would always detach on my glass-bed equipped Anet A8. The part is a axle /…
To my surprise I wasn't able to find a existing generic hydraulic piston model suitable for repairing Bruder excavators. This one was originally created for use with the Bruder CAT Mini Excavator (02456), but the generic OpenSCAD file is…
This is a remix that adds some more geometry to make the chain less fragile, as otherwise it might break relatively easy when printing with PLA and in heavy duty use with small kids ;)
Original steering wheel on our Rolly Toys tractor broke, so I designed a replacement. The model is using OpenSCAD for customizability and all major parameters can be adjusted easily, with the model changing accordingly. Should also work…
This one was originally created for use with the Bruder CAT Mini Excavator (02456), but the generic OpenSCAD file is adjustable and it should be quite easy to adjust it also for other models. Note sibling model…
This model is a replacement for the Fischertechnik Statikstein 36973. This element appears to be used primarily in the Fischertechnik Dynamic marble runs / Kugelbahn and one I got used had most of them missing, so I designed this…
Remix of a replacement fork for Bruder telescopic loaders (should fit CAT and JLG 2505 ones).
This is an adapter that allows attaching a FUXTEC handcart to a Berg XL Gokart. By using a bayonet lock inspired approach it doesn't require any moving parts. For mounting, take the adapter, slide it over the handle of the handcart and…
The rightmost holder for the ramp of our used Bruder low loader broke off. I designed this replacement part and hot-glued it in place. Not the most aesthetically pleasing, but gets the job done and appears robust enough. I use the…
This is a combination of the two original models to allow mounting tools/accessories originally meant for Bruder telehandlers/frontloaders to be used with the big Bruder excavators. Might not be an accurate representation of real-world…
The original Mercedes Star on my kids' tractor disintegrated, so I created a replacement one. This is for the Rolly Toys FarmTrac MB 1500 / MB-trac.
My kids inherited an old Rolly Toys MB Trac, for which some of the plastic parts became brittle. The holding hooks for the loader broke. so I designed this replacement part. Note that apparently, there are different types of these loaders…
When searching for a spiral cable protector that I could adapt for use on a Unitree GO1 robot to protect repaired/soldered cables to the motors of one leg, I came up empty. So here's an OpenSCAD based version that conveniently allows…
We have 2 Bruder trailers where the hitch pin broke off the same way. I searched for a replacement and found the model this one is remixed from, but in our case it appeared easier to not to drill the hitch part out. Instead I modified the…
See also description of model this is remixed from. Intended to replace the notoriously unreliable filament sensor on the Anycubic Mega S series of printers. The added geometry in the middle makes it a tad harder to print, but using…
Remix of https://www.thingiverse.com/thing:5447123 with following changes quickly implemented using Blender ( with the main aim of making it more durable, as the original broke quickly for me): Added scaled sphere near bottom as otherwise…
This is a low poly model of the Boston Dynamics Atlas robot as used in the DARPA Robotics Challenge Trials in December 2013 in Homestead, Miami. It is based off the model available as open source via the drcsim project (…
This is a replacement lampshade holder for the Ikea ÅRSTID table lamp. The one the lamp comes with is made of “Steel, Brush finish nickel-plated, Acrylic coating” and in our experience doesn't take kindly to the lamp getting pushed around…
I remixed the original model to mount my ThinkCentre M920q to a Skadis pegboard. The fit is somewhat loose, if exposed to vibration or motion I'd recommend adding additional measures to keep the device in place.
Adapter for mounting a Sigma bike computer, so the sensor mounted on the fork can be mounted close enough to the magnet at the wheel. Couldn't mount the sensor close enough to the magnet mounted on the wheel and hence created this adapter…
Holder adapter for putting smaller LiPos (and warner) into the NiMH slots on RC cars. As my old NiMH batteries died, I modified this adapter so I can safely use some smaller LiPos and a warner in the NiMH slot of RC cars. Note it's not…
The available rings for those ~250mm spools don't fit my printer's bed, so made this segmented version. Have to print 3 for each side (3 fit on the bed of my Anet A8 in one go as per photos) and then clip them into the spool. I used some…
This is a remix with some modifications as stated to make it easier to print and more sturdy. For Falk / Falquet & Cie SAS made excavators arm that are available for mounting on toy tractors, but also tracked excavators. Printed in…
Edited original to make head depth configurable. Used to make Eduplay compatible stamps to which you can glue a custom stamp shape/design made from sponge rubber. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No…
Inspired by the lightweight (but relatively expensive) fun the Tiny Whoop brings, this is a minimalistic frame replacement for various toy quadrotors that allows for building absolute minimum weight and size versions of them. Compatible…
Remix of the original optimized for usability with the Pixel 7: Created a cut-out at the bottom, so one can swipe up on the screen while the phone is in the cradle in portrait mode. This wasn't possible with original model. Created some…
Customized version of http://www.thingiverse.com/thing:1735045 for use with the H101 controller, 7mm brushed motors and Ladybird props. See this blog post for a in-depth discussion of a FPV build using the motor mount. Created with…
Remix of https://www.thingiverse.com/thing:2579144 . I removed the "teeth" that are also present on the original camera guard but that (as far as I'm aware) serve no functional purpose. Print Settings Printer Brand: Prusa Printer: Prusa…
This is a replacement linkage for the Bruder CAT Mini Excavator (02456). OPENSCAD model created by prompting Gemini Pro 3.1 like so (and then performing minor parameter updates): I want to create a replacement part for a Bruder CAT…
Customized version of http://www.thingiverse.com/thing:1735045 modified to fit BayangToys X9 props with 2mm distance between props. Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1735045 Instructions…
This is a remix that makes it easier (or even possible) to clip in the excavator boom for the Bruder Schaeff HR16 mini excavator (02432). Made the lower horizontal strut smaller as the fillet transition between it and the side walls…
As evidenced by one of the attached photos, the right part of the main boom breaking seems to be a frequent failure mode on the Bruder midi excavator / CAT Minibagger 02456. I made this little clamp that is super quick to print and can…
Replacement for the large hydraulic actuator of the Bruder CAT Mini Excavator (02456). Best printed in PETG.
To wszystkie aktualnie dostępne wyniki.
