Liczymy pasujące modele…
The plate should have the correct space around the connector. Because it is drawn with official measurements. Just substract the plate from your object and the connector is integrated in your design. The cut is also intend to be cut of…
Just another case for Raspberry PI 5 with or without active cooler. Because the fan cooling there are not too many ventilation holes in the case. Slightly everything holds together without any screws. That is nice if you must open and…
Easy to print and assemble. Side part must be printed twice. No support needed. No postprocessing. No glue. Just plug it together. According to Norm UNE-EN 13698-1 Support & Feedback I share my designs purely for fun and don't make any…
The plate should have the correct space around the connector. Because it is drawn with official measurements. Just substract the plate from your object and the connector is integrated in your design. The cut is also intend to be cut of…
Easy to print. As an addon to my Euro Pallet https://www.printables.com/de/model/380553-euro-pallet-eur-1-epal-110-correct-sizes Normally they are stackable. This one is not. No support needed. No postprocessing. Have fun!
Fits to the USB Webcam, and any other C-mount optics. https://www.printables.com/de/model/423294-usb-camera-professional-8-mp That one is specially for Jozef. :-)
The plate should have the correct space around the connector. Because it is drawn with official measurements. Just substract the plate from your object and the connector is integrated in your design. The cut is also intend to be cut of…
Printed threads always have flaws and burrs. With those tools you will be able to discover them and have the possibility to remove it. If you even want to use a printed screw on a printed object, there is the additional problem of a high…
Easy to print. As an addon to my Euro pallet https://www.printables.com/de/model/380553-euro-pallet-eur-1-epal-110-correct-sizes Normally they are stackable. This one is not. No support needed. No postprocessing. Have fun!
Pretty stable, I hope at least. Use one M6 x 50mm allen screw to attach. Cross is attached with M4 x 10mm
Easy to print. Added two versions with 12 pieces in two different sizes. 6.5 and 6.6 indicates the distance between the flat sides of the bit. Means 6.5 is a tighter fit than 6.6. As an addon to : Container box, 80x120x20mm, V2, pallet…
Totally useless, cuts not at at all.
Just to test placements of Items. Gives maybe a hands on. Your slicer might be busy for a while. Because it takes extreme long to print in original 1.6mm height, I added a version with 0.4 mm thickness. Saves a bit the time and the money.
Stretch Wrap Dispenser for Film Rolls of 1.5” Core Size. Cheap dispensers give no tension to the foil, or the whole foil falls of the dispenser. That is why I made that handle with the adjustable tension. Tension screw is even locked so…
Just another case for Raspberry PI 4 without active cooler (may not needed). Slightly everything holds together without any screws. That is nice if you must open and close it many times. There are two types of cover. One is without screws…
Put your Dremel or minidrill tools in that. It fits into the container below. Easy to print. As an addon to : Container box, 80x120x30mm, V2, pallet size, stackable.…
Hello all I am very surprised how many people like and download the first model of the Euro pallet. Seems to me that many use it for RC Models and such things. May someone wants to build a special pallet, or a broke one, so I decide to…
Designed to build accu packs. Prevents from short circuits. Print with 0.1mm layer hight. At least at start.
Support body for a 200m linear rail. Size of body : 30x10x200mm. All screws are 3mm. Distance between all holes is 20mm
Support body for a 100m linear rail. Size of body : 30x10x100mm. All screws are 3mm. Distance between all holes is 20mm
It is the update to my T-Adapter for 6mm or 8mm water hose. It supports 3 in or out takes which you can choose the hose diameter diameter yourself. The example shows two 8mm and one 6mm connector. Important to know. It is almost…
Full protection case for soil moisture sensor. Fill the upper part with water resistant material to protect the electronic part. The screw (M3) on the bottom is intent to set the operating height of the sensor. It is the solo version…
Prevents from short circuits. Print with 0.1mm layer hight. At least at start.
Did that to support a DSO and displays with 100 x 100 VESA holders. For holding heavy items there is a true hole for a M3 treaded stick (armored). So it cannot break easily. It fits to this :…
Easy to print. Added two versions with 12 pieces in two different sizes. 6.5 and 6.6 indicates the distance between the flat sides of the bit. Means 6.5 is a tighter fit than 6.6. As an addon to : Container box, 80x120x30mm, V2, pallet…
Support body for a 150m linear rail. Size of body : 30x10x150mm. All screws are 3mm. Distance between all holes is 20mm
Extension Adapter Linear Rail
Designed to build accu packs. Prevents from short circuits. Print with 0.1mm layer hight. At least at start.
The hinges and locks will be published later.
For mounting in the subrack This fits to : https://www.printables.com/de/model/485156-pcb-bracket
Just a simple motorplate which holds two sensors to prevent pump when empty.
PCB bracket with two threads M2.5 for front panel fixing This fits to : https://www.printables.com/de/model/485167-front-plate-blind-3he
Easy to print. As an addon to : Container box, 80x120x50mm, V2, pallet size, stackable. https://www.printables.com/de/model/390255-container-box-80x120x50mm-v2-pallet-size-stackable No support needed. No postprocessing.
The hinges and locks will be published later.
Easy to print. As an addon to : Container box, 80x120x40mm, V2, pallet size, stackable. https://www.printables.com/de/model/390256-container-box-80x120x40mm-v2-pallet-size-stackable No support needed. No postprocessing.
Just had this older power pack I want to use for this 19 inch rack project. Needs at least two screws 2.5mm with countersunk head.
Vape cover and protection ring for Vaporesso Vape. This vape is nice so far but the lid opens easily itself if it is stored in a bag or whatever. So the cover prevents from unwanted opening. The ring protects the glass tube and helps to…
Often used lock for all kind of camping vehicles. This I needed for the boat of an old sidecar motorbike. The old lock was lost an there remain just a hole. This piece allow to mount a new lock. Used M5 Allen screws wit a square nut…
Designed to hold a 2.5 Solid State Disk (SSD) on place. Intent to use with my VESA Mount Raspberry Series Cases, but works stand alone as well. It has 10mm height inside, so a slightly larger SSD can fit, and get some air to cool if needed.
It is mount from inside the furniture, keep things together. Should fit to the original.
This is a vintage size. These where often used for power supplies. Possibly produced by Minipa , HC and Hung Chang, mostly sold by Conrad, Monacor or Altronics Support & Feedback I share my designs purely for fun and don't make any money…
The size of the board vary sometimes, depends how they cut it in the factory. Size is 80 to 60mm (half pallet)
This is a compact two-part surface-mount enclosure designed to hold up to 4 single-pole miniature circuit breakers (MCBs) , specifically modeled for standard European modules like the ABB System Pro M Compact S200 (1-pole, 16A) or any…
https://www.finglai.com/products/instruments/pointer-ammeter-and-voltmeters/85C1/ Support & Feedback I share my designs purely for fun and don't make any money from this. If you like this model or find it useful, please consider leaving a…
It is for this product: https://www.victronenergy.com/battery-monitors/bmv-700 Support & Feedback I share my designs purely for fun and don't make any money from this. If you like this model or find it useful, please consider leaving a…
http://www.kdsimeter.com/BP-670-Frequency-meter-45-65HZ-100V-Industrial-universal-analog-meter-pd19300.html Support & Feedback I share my designs purely for fun and don't make any money from this. If you like this model or find it useful,…
This is a compact two-part surface-mount enclosure designed to hold up to 3 single-pole miniature circuit breakers (MCBs) , specifically modeled for standard European modules like the ABB System Pro M Compact S200 (1-pole, 16A) or any…
This is a compact two-part surface-mount enclosure designed to hold up to 2 single-pole miniature circuit breakers (MCBs) , specifically modeled for standard European modules like the ABB System Pro M Compact S200 (1-pole, 16A) or any…
I did that just from a drawing, therefore it is not too sure if it fits, so let me know. Support & Feedback I share my designs purely for fun and don't make any money from this. If you like this model or find it useful, please consider…
To wszystkie aktualnie dostępne wyniki.
