Liczymy pasujące modele…
Easy and fast to print. Just remove the rear glas element of the Helios 44-2 and place the apaturein it. You also can add some fishing line to it and color it blue for cinematic lensflares. Print Settings Rafts: No Supports: No…
You can hang a 6cm christmas ball in it as a gift
double heart key chain pendant valentines day
I added a hole in this great design, to drill on edges an rods. You can also use it to drill centered in 2cm wood. The rework has rounded edges everywhere. Print Settings Rafts: No Supports: No Resolution: 0,4 Infill: 20 Category: DIY
Simple Tree of life jewelery stand. Base needed to be 3d printed and the tree can be print or lasercut from 4mm plywood. Use some superglue to assamble.
I liked the idea from pdub77 https://www.thingiverse.com/thing:3752780 But it doesn`t fit on my Sony cameras. So i remodelt the hotshoe and added bit more space for the Wirelesss GO. Thank him his work with a Like! Category: Camera
This wallart is optimized for a 30x30cm buildplate 3d printer, but you can scale it down. Easy to mount on the wall with some sticky tape or a screw. And i uploaded the .svg for lasercutting too.
Small and large positiv print for making a silicon mold for resin, concrete or soups. Category: 3D Printing
Small storage case for the Rode Wireless Go. Print Settings Rafts: No Supports: No Resolution: 0,2mm Infill: 15% Category: Camera
I want more colorgels for my AD200 with the H200R round head. So i designt this magnatic version to easily mount self cutted 67mm diameter colorfilters or the round Rogue lightning filters. Print bouth parts and glue 2-4 magnets, round…
Simple wall mount for the new 2020 version (10th) of the Amazon Kindle Fire 8 HD. Only support the 4 clamps and remove later the bridged strings dor the screws. Print Settings Rafts: No Supports: No Resolution: 0,6 Infill: 15% Category:…
I made this 45° adapter for the display of the Creality CR-30. That when it is mounted on a wall, you can still easy look at the display with the wall mount from Nathan Bush. https://www.thingiverse.com/thing:5198715 All you need, are the…
I liked this small ball joint from diezopfe much and want to make me a small ball mount for my camera hotshoe from it. +++Use a brim on the screw for better adhision+++ https://www.thingiverse.com/thing:4739696…
Small prints to avoid getting sawdust oder dust in the controller of your maschine.
To protect my Rode wireless Go i made this case to print in TPU or TPE. Print Settings Rafts: No Supports: No Resolution: 0,2mm Infill: 15% Filament: any brand TPU or TPE Notes: No Support needed Category: Camera
A simple tool to hep you to align parts right
Nockenstapelgetriebe für Bernina-Nähmaschinen 730, 732, 830, 831, 832, 840, 850 To replace the broken plastik part or use it as negativ for a mold
Made this small charm. Also possible to scale it up for a necklace. Used the africa cup from BeatherBot. https://www.thingiverse.com/thing:261324 Category: 3D Printing
A small solution to mount the Rode wireless go and go 2 invisible on a 360° cam like the Insta360 One X 2 or Qoocam 8k v2 can turn on and off when mounted. And i added a mirrored version, if you want to monitor the lav if mounted upwarts…
Replacment pin for SodaStream CRYSTAL to use old style valve CO² zylinders with the small boll tip. My SodaStream couldn't handle this style of CO² cartridge, so i disassambled it and redesignt the pin with a flat end instet of a small…
For better alignment of the prints from the MBrush or PrinCube. Best print n transparent PLA or PETG. Print Settings Rafts: No Supports: No Resolution: 0,4 Infill: 20% Category: Office
I made this as a gift wrapping for christmas. You can put a giftcard or similar in size in it. The bottle design is from AsconX https://www.thingiverse.com/thing:5064756
Replacment pin for SodaStream CRYSTAL to use old style valve CO² zylinders with the small boll tip. My SodaStream couldn't handle this style of CO² cartridge, so i disassambled it and redesignt the pin with a flat end instet of a small…
Nockenstapelgetriebe für Bernina-Nähmaschinen 730, 732, 830, 831, 832, 840, 850 To replace the broken plastik part or use it as negativ for a mold.
A small 20x20cm lightcube for small things like jewelery, tabletop or any other parts to photograph for onlineshop or ebay or macrophotography. Print in white or transparent and spray the back and bottom white or use a sheet of paper in…
Made an adapter to mount an old Carl Zeiss lens to my Sony a6300. The lens was for an Icarex 35s camera.
Screw a handle in and put the Rode Wireless Go in to get a interviewmic. Print Settings Rafts: No Supports: No Resolution: 0,2mm Infill: 15% Category: Camera
Prototype Protection cover for the lenses of the Ricoh Theta Z1 Changes for fit will be done after i got the cam Category: Camera
Screw sky from paw partol on you cameralens. The blossom has a 58mm filter threat to screw sky in front of your camera. Now you have the attention from the kids while you have a photoshooting with them. Easy to print and color with paint.
I saw a video where a guy showed to twist the pocket around like it was showen in the film Inception. But his movemnt was not easy and hard to turn the pocket around the camera head. So i made a mount to get the pivot at the camera hight.…
A handy holder for the vat on the new wash & cure station from Anycubic, to let every drop of resin out of the vat back in the bottle. Print Settings Rafts: No Supports: Yes Resolution: 0,2mm Infill: 15% Category: 3D Printing
cam holder for the creality cr30 and Xiaomi xiaofang and Wyze Cam
Now the cover is final and tested and v2 is with a better fit. Sand it smooth and go inside a bit with a lighter for more smoothing. Category: Camera
Easy printable wallmount for LEKI nordic walking sticks and pads.
https://www.thingiverse.com/thing:4556985 I liked thie design from DIY3DTech for my G8 and G7 lenses, but the allways it was lose and the laser wasn´t consistent with moving. Even with a foam pad it wasn´t as stable as i wished, so i…
A small lenscap for the Instax EVO to protect the lens. You can make a strap on it to mount to not lose it.
A simple wall drillguide, for straight drilling and catching the dust. Best to print in white. No supports needed. Print Settings Rafts: No Supports: No Resolution: 0,4 Infill: 20% Category: Machine Tools
Made a Cyberpunk 2077 themed smartwatch charging stand for my new Ticwris Max with LEDs. Thasnks to both for there great work i combined here for my special stand. Print Settings Rafts: No Supports: Yes Resolution: 0,2mm Category: Mobile…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/2cQOnqBFwuo Category: 3D Printing
Screw adapter to get M3 screws and nuts fit for linear rails to hold them on the frame. Just put the M3 nut in the print and you are ready. Maybe a bit force to get it in. Print Settings Printer: Qidi X-one Rafts: No Supports: No…
To tighten the handcuff of your camera on your wirst. That you can´t lose them. Category: 3D Printing
A small salt shaker in egg shape for eatern. Print the cover and bottom in one color, the top in clear and the plug in rubber like TPU or TPE. After sanding all parts, glue the top in the bottom part. Assamble like on the picture and have…
A new plate, to mout the new NEJE 30w and 40w laser modul to the Ortur Laser Master 2 7w, 15w and 20w frame. Print Settings Rafts: No Supports: No Resolution: 0,4 Category: 3D Printing
Made this dispencer spout, to convert a spray bottel for hand desinfection. Printable without any supports. I did it in MSLA on my Photon S Category: 3D Printing
I modded the Xiaomi cover from Raoul, https://www.thingiverse.com/RaoulDuke/about , so that the cam can be charged and turned on with wifi to connect it with the phone without everytime to remove the cover for this. And i also added 4…
A simple mod to use 22mm wrisatbands / watchbands on your Ticwris Max, Lemfo Lem T or DM100 Use a brim to print it at a slowly pace Print Settings Rafts: No Supports: Yes Resolution: 0,4 Infill: 20 Category: Electronics
To replace the rubber part on the top for preventing the stick sliding of. Print in TPU or TPE with allow thin walls in the Slicer. Category: Camera
Made a ceiling mount for my YN 360 leds as lighting for a small photo studio Print Settings Rafts: No Supports: Yes Infill: 20% Category: Camera
For Lasercutter and 4mm plywood Cut part 1 and 2 two times and part 3 six times. Assamble like in the picture, paint it and screw or glue it to your bathroom wall. Print Settings Supports: No Category: Bathroom
Ony you need to du is glue the parts together. Print Settings Rafts: No Supports: Yes Category: 3D Printer Accessories
Trotz dieser Sollbruchstelle, können auch alte Platinen die sonst entsorgt hätten werden müssen, weiter verwendet werden. Die Buchsen dieser Kabel brechen so leicht und machen dadurch das ganze Board unbrauchbar. Doch mit meinem Clip,…
I made this remix from martin19791121, https://www.thingiverse.com/thing:2401808 , to make it possible to guide a 90° micro USB cable down to the pole to run it on a powerbank. Print Settings Rafts: No Supports: Yes Resolution: 0,2mm…
Print this holder in TPU. For use on the phonemount in the picture, to get a coldshoe for your phone + pocket use. Use glue or UV resin to get a coldshoe on the print. Category: Camera
Build it to mount my remote everywhere. Also on a custom clip for my TELESIN 2,7 m Ultra Lang Selfie Stick. Use superglue to glue the TPU/TPE part in the clip, to avoide scratches on the pole. Print Settings Rafts: No Supports: Yes…
For my new Kandao Qoocam 8k a hard lenscover / lenscap like i did for my Insta360 One X Print Settings Supports: Yes Notes: Sand the edges and surfaces very good after printing Category: 3D Printing
A very simple an flatter version of the covers from Slowbud https://www.thingiverse.com/thing:3731146 Thank him his work with a Like! Category: 3D Printing
A hardcover for protecting you Xiaomi mijia sphere 360 lenses. Print bothe parts. The rings in TPU or TPE and glue them on the inside to avoid scratches. Heat the clip sidways with a hairdryer to bend them a little bit. 1-2°, that it is…
A remixed version from stevemedwin. It´s shorter with round edges and a TPU/TPE toplayer. I used a insert like this one. https://www.amazon.de/Sourcingmap%C2%AE-hautnetz-Metrisches-Gewinde-Einsatz/dp/B018503MX8 Glue it in and then the TPU…
Clips that stop the shacking of the printbed and to hold a glasplate at the Qidi X-one. Print Settings Printer: Qidi X-one Rafts: No Supports: No Resolution: 0,2mm Infill: 0-100% Category: 3D Printer Parts
After some problems that the remote from MadV doesn´t turn on after you have mount the backplate. I decided to make a Cover for it to use it without the back and to allow a mounting with a carabiner on a backpack or a belt. Print it in…
A simple clip to put filament samples on for storage or shipping. Put the end in the left hole and wrap off as much filament of you would like to ship, and cut it off and put the end in the other hole. Now it is impossible that a end can…
To wszystkie aktualnie dostępne wyniki.
