Liczymy pasujące modele…
Strongly recommend this remix/remodel ------------------------------------------------------------------------------ A really simple desiccant spool center for Bambu Lab's spools. Does not interfere with AMS and has an easy twist lid.…
A remix/remodel desiccant holder. My original model isn't ideal because when you swap it, you risk spilling the desiccant. Humebean's model is far more ideal because it has an inner lid, but I wanted to make a few tweaks. Uses 3d printer…
Gotta love a good box. The snaplock design from Hugo is great, but I wanted custom sizes and a few printability improvements. Combining my previous Tough Box learning together, and remodeling this in Fusion, you can now make up any sized…
This parametric box supports an extremely wide range of customization from the Fusion 360 file; just open the “Change Parameters” feature after opening the F3D file. Highlights: Height, width, and depth; the lid and bottom can be quite…
Level Wind (Diamond Screw) Saw this the other day on a filament respooler model and HAD to model it up and try to print one; such a cool concept. The level wind (diamond screw) allows you to rotate a rod in a single direction, yet the…
A 21700 cell holder I came up with for make a 3p battery setup. They nest together in a nice, compact hexagonal/staggered shape for efficient use of space. There are two variants, and two setups. The first is a single piece, you can…
Incorporated the dice tower mixed directly into the hexagonal section. This does mean that one of the die can “escape” into the tower door, but I don't mind that so much. Otherwise, this is the same model, dimensions, and setup as the…
A 3 part model that, combined with some M20x1.5 Cable Glands and a snip of 1.75mm TPU filament, you can splice a 3 wire connection together and keep it dry. I recommend printing the inner piece with an exterior brim and the caps with an…
Appreciate the work of the original author, but found a few things I wanted. Original was overly large; these slim down a lot and remove all the wasted infill The makers mark text made printing sub-optimal I preferred the "wings" found on…
This remix of the fun cat napkin holder adds a strong support base, fixes the non-flat bottom, removes the extreme overhangs, and rounds out all the edges for a nicer print and touch experience. The included Fusion file has custom…
Love the pikachu, wanted a giant one, but also wanted it to be useful. Took the original STL file into Fusion 360 and chopped up the insides, added a slot and a bottom cap so you could use it as a coin bank. Awesome! Note: I did not spend…
Allows for the easy and secure install of a Prusament Refill on to a BambuLabs spool. ID to fit the spool, and ribs to pinch the refill carboard into place. Notch cut out to allow for secure forward/backward rotation of an AMS. Fusion 360…
Throwing in my hat on the MAX7219 display cases. While very much inspired by the linked “remix”, I did model this from scratch. Included in the files is Fusion source files, which are you might want to adjust the ESP holder, given that…
Designed to work with the DJI RC2 controller and the FPVtosky RC 2 Sun Hood Shade installed, this design will let you secure the controller to a gopro mount, typically for handlebars on a bike or, I guess, wherever you want! WARNING: Use…
[Update 2019-04-03] v4 released: Changed the files to be in MM so they open properly sized in many editors slicers Added a "fillbar" which can be placed over the top model and used as a way to add extra support in the print. ( See tip #2…
I did a poor job printing the original and wanted to have another go at it since my overhangs came out really bad (printing way too fast). With this reprint, I wanted to optimize the wall depth a bit and make it fit on my counter better.…
A remixed spool for the excellent filament winder (see remix source!) Items remodeled: Based on a 200mm (180 if you can find it) threaded rod and 2x nylock nuts (though regular nuts can work as well) Uses 90 degree FDM optimized threads…
A discrete compartment you can bolt under the Talaria XXX seat. Pictured here pritned in PETG-CF with 4 walls, 4 top/bottom layers, and a high 25% grid infill. More details here: https://jrm.cc/projects/talaria/under-seat-compartment/
Picked up a DSO152 Oscilloscope and it came in a box; here's a nice way to keep it. This one is large enough to hold the “deluxe” version with the nicer probe, so if you skipped that, you could probably shrink this down quite a bit. You…
Modeled from my early generation Kona Stinky frame, this allows you to put a large amount of cells into the frame space while no interferring with the suspension. In the Fusion file I've got layouts for two setups, both based on 2170…
V2 Edit Changed the holes to slots to allow for a bit of positional adjustment. Widened the allowance for the rivnut extrusions a bit for better fit Added a slope to the mount sits on the aluminum bar instead of floating above it Added…
I've got this super large roll of nickel for spot welding batteries. It only had tape around it though and I was just besides myself waiting for it to unspool and become a huge mess. This print screws together capturing the nickel roll…
Wanted to get a feel for how big the G300 is and where I could potentially fit it on my build. Took their dimensional drawing from the website and did a quick mockup of the major components. The “no-divets” model will print with much less…
Same models as Apollo provides, just with the dimples removed so that your FDM printer doesn't lose its mind ;)
------ WIP HAS NOT BEEN TEST FIT YET ----- (That said, the dimensions are pretty much identical to other successful prints so it should fit. I just don't have my replacement fan at the moment to attempt the install. The most likely goof…
A latch for the awesome Airsoft Pellet Bearing Kite Reel. Currently a bit of a WIP in so much as the latch part is a bit on the thin side so a slightly larger than perfect nut can cause a layer separation. Success on this print could be…
Things I've made: A brake light mount that fits under the seat and can support blinker lights A “LED Whip” holder which, mostly, snaps into place but has room for zip ties For after market triple crown fork: A key collar that allows you…
Allow you to mount this motorcycle kickstand* to the Fiido Q1/Q1S when using an aftermarket motor extension. Likely does not fit the stock area, but feel free to remix and experiment. We'll see how it holds up; I used PETG with 6 walls…
Picked up these branded 4ft long, chainable hanging lights. (Mine are specifically these Dakason lights ← amazon link, non-affiliate.) Normally you can only “link” them in a straight line, but I wanted a nice square, so I modeled up the…
A torque arm plate for the RadMini4 which allows for mounting a motor with an m14 axle and provides clamping force to prevent any rotation when using regen braking.
So my desk came with these 80mm holes drilled in it for running cables. Except one is totally unused and my kid keeps popping it out and throwing it around the house! So I built one that screws on at the bottom and provides a nice little…
Got a reolink fisheye on the ceiling and finding that something else is hanging down in the way? No problem, print this absurdly long tube and put it in between! The Fusion file is included so that you can adjust the length (anywhere from…
Allow for mounting regular bike brakes onto a Razor's pitbike style front fork
Got an AuxxLift system and the small remote? Toss this in the wall and give it a permanent home. You can also consider this other model: https://www.printables.com/model/1080321-auxxlift-remote-wall-mount I just wanted to be able to take…
Allows for the mounting of any common ebike battery tray (reention, hailong, polly, etc) to the folding tube while still retaining the ability to fold up the bike. Print 3 copies, use M5x45mm screws and M5 heat inserts (4 per clamp, 3 for…
Combines the two remixed models into a single Gladiator Gearwall/Geartrack mount for the ryobi 18v vacuum. Included is the STEP file, an stl for the model preview, and the fusion source. I personally used M5x14 cap head bolts to make this…
I liked the concept of the original "lift off table" legs from zuspiel, but I wanted them to meld into one another even more seamlessly. So I popped into F3D, pushed the lower leg assembly edge in by 2mm, and extruded the top leg assembly…
Got a set of HD5XX series headphones that you're taking wireless with a Qudelix-5k? This little clip will snap on to the headphone band and give you a secure location to clip the DAC on to. I printed in PETG so it would be a bit flexible…
There are some minor modeling errors in the original model; specifically around the curvy edge in which the arcs create very small non-arc geometry which causes small jerks in the print when it should be a long continuous curving motion.…
Allows for mounting a hailong style battery under an Arield Rider X-Class seat
A simple spool to hold some nickel strip
Got some Gladiator Gearwall/Geartrack and want to hang up a ryobi cutter more nicely? Print these two out, slap some glue between ‘em, and you’re good to go. All I did here was combine the two models. Sources included.
For this breakout board from Grin I needed a replacement casing. Prints flat, no supports, 0.4mm, 4 walls for a solidness, infill of whatever. Strap the case down with some extra small zipties with the included through-holes. Included in…
Adapts this brake light: https://www.amazon.com/dp/B07SPGDHJM Print it face down; no supports required, has nice chamfered edges. If you want to wire up the brake's “high output” and keep your motor cut off, grab one of these relays:…
I have a Grin Phaserunner installed on my RadMini4 (2019 model) along with dual batteries and wanted to tidy up the center triangle area. Creates a nice space to contain the controller, wires, and maybe another device or two (like a dc/dc…
For inside-mount shades from SmartWings – print this out and hold it against your window edge to easily mark the two ovals for drilling the holder clips. Spaces the clips 4" inside the window edge, per install guides, and makes them flush…
Update (2024-09-24) [V2]: Revised the model to allow for an M5 bolt to pass through the body/ball to prevent neck snapping. Secures to the ball with an m5 locknut. (Bike was knocked over and it broke exactly where you'd expect it to.)…
Pop the go pro mount off, insert the "bar" from the top, pop in the top piece, screw a 1/4-20 1/2" long flat head through and you're ready to go! Print Settings Rafts: No Supports: No Resolution: .3 Infill: 50 Notes: Use at least 4 walls…
A case for the Frankenrunnner that has four zip-tie passthroughs so it can be more easily attached to a bike frame. In the pictures, this is setup under a RadMini, but it's not really specific to that bike. Included is the STEP file if…
I have an Ergotron monitor arm mounter through a ~3in drilled hole in my Uplift desktop. This print sits inside the hole to cover it back up while allowing a small amount of wires through. The funsion 360 file is included. Category: Office
To wszystkie aktualnie dostępne wyniki.
