Wszystkie modele

dualsense ps5 back shell/housing 3d scan

it's just a scan, not optimized for printing

Volcano Proximity Level Sensor Relocation Plate for Neptune 3 Pro/Plus/Max

extra m3 nut and 4 or 6mm bolt are required. sensor position stays the same, no probe offset correction is required first version will fit better but it requires supports – see attached screenshots on how to place them

xbox elite-style d-pad for dualsense & dualshock & BSP D9 (PS5 & PS4)

Designed for 0.1mm layer height (0.2mm first layer height is fine). No supports required. Use 1mm thick double-sided tape pieces UPDATE: added BSP D9 version with +0.4mm clearance

xbox elite paddles

I didn't like the stock paddles nor other printed models (they were not clicky enough or comfortable for me). Make sure that your filament's layer adhesion is strong – these paddles can break when pulling out. It's not a big deal though –…

Neptune 3 Pro Clip-On Printbed Guide (No Adhesive Needed) | Shorter Version | REMIX

UPDATE 1: made a new model from the scratch – it's super tight fit and hard to install but worth it Description : This is a shorter version of the original model:…

Neptune 3 Pro/Plus/Max X Belt Tension Stopper

Inspired by @Lamarc_1549027's model for N4

Universal BTT ADXL345 2.0 bed mount

IMPORTANT : For safe parking, the ADXL mount should be positioned below the Y-axis center. That's why the V2 model has "tail" - to ensure the mount is placed correctly in the slicer by default. If you see that the printhead is going to…

Steam Controller 2026 STEP model + puck

Neptune 3 Pro Scrap Bin - Sand Dune Remix

Print with 0.2 layer height and 0.4 external perimeter width

Ikea Skadis Cup (vase mode) with holes for universal hooks + hooks

Update : added v2 version, fully recreated: same shape, now walls are 2 lines from start, prints with 3 bottom layers, external perimeters should be 0.6mm width (same as old version) also added v2 version with 2 sections and 4 sections…

Towel Peg

Printed mine with PETG, 3 perimeters and 30% infill

5015 heatbreak fan adapter for Neptune 3 Pro/Plus/Max

Update 1.1 – print optimization and minor fixes You'll need 2xM2 6mm bolts for duct and 1xM2 16mm bolt for fan mount. Designed for Sunon fans, Younuon fans also fit fine. Fan should be installed at a 10° angle (see last picture) and…

Box With Hinged Lid

Size: 190.6x147.5x37.2mm Update: Added a two-part lid, as suggested by @LuckyResistor . This makes the lid surface better looking and easier to print (no long bridges), but the two parts need to be glued together. The bottom part of the…

65% keyboard plate (68 keys) + plate for FLEsports F12

Compatible with both plate mount and pcb mount stabs For 235x235 printers – not an easy task but this plate can be printed vertically:

scuf impact paddles

Added v2 (slightly curved version): Print recommendations: Prints on side (model already oriented properly) No supports Wall generator = Arachne

Neptune 3 Pro/Plus/Max 5015 Fan Mount (REMIX)

Efficient cool looking fan shroud. REMIX: added cutouts for chunky heatblock wires and the fan mount

universal mellow fly adxl345 bed mount

IMPORTANT For safe parking, the ADXL mount should be positioned below the Y-axis center. That's why the model has "tail" - to ensure the mount is placed correctly in the slicer by default. If you see that the printhead is going to collide…

extremerate rise paddles for ps5 dualsense

I find the stock paddles a little uncomfortable, making it hard to hold controller properly. So, I made these paddles so you can comfortably rest your middle finger on the controller while still being able to press the paddle. Print…

Car Headrest Hook

14.5mm hole for rod (fits VW Jetta MK6 and other Volkswagen headrests I guess) Print recommendations: petg 0.6mm outer perimeter width concentric top & bottom infill no supports

Cartographer V3 Lightweight Dummy Step Model

recreated from https://github.com/Cartographer3D/cartographer-probe/tree/main/STEP

JBL Tune 720BT & 710BT Headband Replacement / Fix

BOM : M2 nuts -- 4pcs M2 bolts 6mm or 8mm -- 4pcs TPU 95a for parts 3, 4, 5 ≤10mm wide double-sided tape for part 5 (or glue) Description : 1-adapter-capra-jbl: Print with a 0.1 mm layer height (0.2 mm for the first layer is fine). Pause…

huawei freebuds se2 pillow case

v3: don't fix the model in the slicer , preview looks broken but sliced model is ok: prints fine with petg and tpu 95a v2 (archive): I couldn't create proper .stl/.stp files due to errors in the boolean operations, so I had to upload .3mf…

3x5015 volcano fan duct for neptune 3 pro/plus/max (fly adxl345, cartographer)

Default model (stock probe) -- the probe position remains the same as in stock ; no offset correction is required. BOM : Default model (stock probe): heatbreak fan: 1xM2 16mm bolt + printed heatbreak fan-16mm-bolt-mount model fans: 2xM3…

Volcano Hotend Fan Shroud (2x5015 & 3x5015) for Neptune 4 & 4 Pro

You can also check this model for Volcano hotend (3x5015): https://www.printables.com/model/1294309-neptune-4-35015-printhead-volkano

Contour Valet Tray

Simple and elegant. Not super functional though

Neptune 3 Plus Y-belt Tension Stopper

Before you print – check out this model first, n4+ version fits n3+ perfectly 2 versions: try to print tight version first Print with 0.4 width, 0.2 height and 2 perimeters (see attached screenshot)

IKEA Jarvfjallet headrest mount mod / replacement

Requirements: 3/4pcs – M4 hex bolts, 8-15mm length allen key with ball end The bolts are a little tricky to install, but it's still easier than taking the whole headrest apart if the original mount is broken or if you want to modify the…

Steam Controller Grip Mod Battery Door (FDM optimized) + Regular Battery Door

⠀

Mini Y Bit Handle

There's a hole at the bottom for easy bit removing. There is also a cutout for Ø6x1mm magnet at the bottom (you need to glue the magnet), it's optional. Compataible with normal hexagon bits (¼" ~ 6,35mm). update 1 : added more rounded…

Neptune 3 Plus PSU 92mm Fan Cover (for CZCL-A500FKG-24P psu)

There are 2 versions: universal and perfect fit for younuon 92mm fan (which I recommend btw, it's quiet and cheap). You can cut 1mm from bottom – it'll be rigid enough. FYI : CZCL PSU's fan doesn't start immediately after printer starts –…

Ikea Jansjo Lamp Diffuser

v2 update : slightly bigger and more equilateral pyramid, tighter fit

IKEA Jarvfjallet Sliding Armrest

Small update: Added optional blocker: requires M2 nut and M2 4mm bolt (main parts stay the same) Description : Requirements: stock screws Optional: 8 wood screws (length 8mm) Armrest height: 32mm Print setting reccomendation: concentric…

Cartographer Mount for Neptune 3 Pro/Plus/Max (Volcano Heatblock)

UPDATE : (v1-2, 1 mar 2026) added a cutout for the heater housing on the printhead pcb: BOM : 2xM2 bolt 6mm 2xM2 nut 2xM3 bolt 4 or 6mm 3xZip Tie 2mm width Description : I made this mount for easy printhead removal, allowing the…

Sony Pulse Elite PS3 Headset Repair (2012, CECHYA-0086)

No disassembly required

Steam Deck Triggers Attachment

I made these trigger attachments because I find the shoulder (L1, R1) buttons uncomfortable to press. By making the trigger buttons bigger, the shoulder buttons become easier to reach Use double-sided tape (3mm wide, 1mm thick). To create…

IKEA Navlinge Shade / Lamp Diffuser

UPDATE : The previously uploaded model did not have a recess for the cap -- I have uploaded a new version 1-1 with it

overhang flower – vase mode

no seams, no retractions

Spool Adapter with Integrated Bearing

IMPORTANT : cut the model so its height is about 2/3 the width of the spool: Print recommendations: 0.2 layer height, 0.4 layer width random seam position or scarf seam concentric top infill

0.01mm Nozzle Offset XY calibration

⠀

Elecom Deft Pro Trackball Stand (8 degree forward tilt)

print recommendations: layer height: 0.2mm for the first layer, 0.1 for others; concentric top surface pattern; seam position - back; 7% infill is enough

eSun eBox 5015 fan adapter

Not perfect but it works. I'm using a 24V Sunon fan with an LM2596 buck converter set to ~12V. BOM: M3 20mm bolt - 2 pcs M3 nut - 2 pcs

Pine Cone Coaster 135mm

TPU insert should be glued. The base part has recesses for 7mm adhesive pads.

tenlog d3-pro extruder cover - dual side fan duct/shroud for stock fans + optional microprobe mount (hictop d3 hero / reayou idex tl-d3)

To get the BIQU Microprobe working, you'll need to switch your printer to Klipper (recommended, I've attached my printer.cfg as a reference), or know how to properly recompile Marlin (I have no experience with this, but you can use…

LM2596S enclosure box case

BOM: m3 screws 18mm - 2 pcs

BSP D9 L1 R1 buttons fix (shoulder/bumpers)

You'll need to replace black rubber thing with the printed one

tenlog d3-pro left extruder cover - single 5015 dual side fan duct/shroud + optional microprobe mount (hictop d3 hero / reayou idex tl-d3)

To get the BIQU Microprobe working, you'll need to switch your printer to Klipper (recommended, I've attached my printer.cfg as a reference), or know how to properly recompile Marlin (I have no experience with this, but you can use…