Liczymy pasujące modele…
Wanted to make a top hat for another model. Prints easy, and the brim can be curved using a heat gun if desired, which gives a higher quality finish than printing a curved brim. Post-Printing After sanding, bending with the heat gun, and…
This is a remix of this: https://www.thingiverse.com/thing:2999507 I just made some of the overhangs more printable while maintaining the aesthetic. Will print then upload photo. For this type of model I recommend variable layer height if…
Made a nozzle cap for a 16.9 oz Aquafina water bottle. The cap adheres to the PCF-26P thread standard (can be found here: https://www.bevtech.org/assets/Threadspecs/2072575\_tmp.pdf ). Prints well, as the bottom part of the threads…
Remade the fan mount using the original afterburner model, blender and mmmta's design as inspiration. Shouldn't have any errors, cleaner geometry. Original from mmmta's: https://www.thingiverse.com/thing:4722263 Category: 3D Printer Parts
This is a parametric missile style switch cover to protect against accidental presses. Can be mounted to a surface using double sided tape. I have included a link to the Onshape document, a Solidworks file (untested, don't have a personal…
Goes on top of stock fan shroud. X-axis plate → fan shroud → BMG Mount. Should print without any supports. I printed it at 0.1mm with plenty of top and bottom solid layers for good rigidity. You may need screws longer than the included…
Remixed to suite my headlamp. Can be used with elastic straps that already have the plastic adjustment bits on them. Nice and snug on a light with a 21.3mm body diameter and straps that are 25mm wide. The Solidworks file is easy to…
The low side of my car's AC is buried and I couldn't get my hand in there to tighten it well. I figured with a special wrench, a socket extension, and a wrench I can 1) avoid mangling it with pliers, and 2) get a good feel for how much…
This part adapts the threads on the exhaust of the Harbor Freight Pittsburgh Vaccum pump to a GERSON P100 respirator filter to reduce or eliminate oil mist. The M24x1.5mm threads will probably fit some other vacuum pumps, if you think it…
A replacement clip for the Ugreen Bluetooth 5.0 Receiver. Mine broke off when the headphone cable got caught on something, so I needed to design and print a replacement. I printed it first in PLA and it worked, but slowly deformed due to…
Insert small side into door hole, turn to open door. Remove and insert into winding hole, turn to unwind film.
Replacement "roller" for Polydryer box. Fixed issue I had with some cardboard spools pulling themselves forward and jamming against the front of the box. Requires 3 80mm lengths of 4mm OD PTFE tube. Should be printed with a material that…
There are two different designs here. The main model requires a small spring (I used a ¼"x13/32" spring from a Harbor Freight assorted spring set) and a #2-56 screw. The positioner can be moved up to make inserting the contact easier. The…
Not a great fit, but it works fairly well. Print however you want, doesn't have to be too precise cause the design sure isn't. Category: Office
Pick the file according to the thickness of the felt used. Felt can be cut with a machine or by hand, doesn't need to be super precise. I used some velcro to stick it in place. Some wiggle room, not a tight fit. Completely silent now, and…
Replacement gear for cold laminator. Substitutes molded key for set screw for better strength (hopefully). 28T 1.25M gear.
To wszystkie aktualnie dostępne wyniki.
