Liczymy pasujące modele…
Hi, i designed this latch because the other latches on thingivers are in my opinion not strong enough for my use. printed with PLA, 0,15 layerhigh and 80% infill PLS POST A MAKE IF YOU PRINTED IT and tell me if it works good for you :D…
Hey, its a Work in progress. will test it soon it is a cap for a spray bottle. but i want to mount a tube Update Added V2 Category: 3D Printing
Hi, this is a Remix from: Scaled up to 1m sword lenght with hole for M8 threaded rod to stabilize Category: 3D Printing
I added instead of the srewing holes two slots for keep belts or rubber bands Printed successful, looks good. have mount it. the slots are a bit too thight. v3 have bigger slots Print Settings Printer Brand: Anycubic Printer: All-metal…
Hi, I designed this bottleholder for my bike. If you like it show it wit a like ;) you can also tip me with a dolla or
Hey, i collected and created some G-code Sounds for 3D-Printers for example the i3 Mega full excel file here: https://www.thingiverse.com/thing:4801959 You can use it at the beginning or End of your gcode so give a signal that the Print…
Hey, this is a car bin for trash. it fits in normal bottel holder holes with a Diameter grater then 65mm. I will youse a
Update See below. Hi. I found this great Filament Swatches but i missed some details and i want Filament Cards wher i don´t have to change the modell every time when i print one. so i add a field to fill in the most important information.…
Hi, I designed this bottleholder for my bike. If you like it show it wit a like ;) you can also tip me with a dolla or so :D Category: 3D Printing
Hey, this is a car bin for trash. it fits in normal bottel holder holes with a Diameter grater then 65mm. I will youse a kabel wire for the hinge but you can also try to print the bolt or use a M3 screw if you heat it up a little bit :D…
this is a small box 20x68mm. I add the STEP file so you can make your own Logo on it if you like. Category: 3D Printing
Hello, I designet this Dremel holder for my Parkside PFBS 10.8 A1 Dremel and use the latch i designet too. Update 28.03 i added a holding part for the front of the Dremel. you can put it in and clamp it with the cap and i added a…
Hi createt this thing because I like to print it with colour and also have the option to print a version that can stand alone. other versions on thingiverse weren't that great. When you print his thing with 0,2mm layerhigh start with…
Hi, update: added a loosen version of the adapter part I designed this wall mount fot this Raspberry Pi 7 inch Case https://www.thingiverse.com/thing:1585924 The Pi with the Screen have a weight about 400g. So you dont have to print the…
Hi, designed this little keychain with borussia Logo. Printed with glow Pla and black Pla. Category: 3D Printing
Hi, first test was full of success I make an version with 4, and with 12 ways out of this thing: https://www.thingiverse.com/thing:1209927 perhaps 12 ways cant work because they are to colose for glasses standing next to each other Now I…
post your make pls ;) Category: 3D Printing
I designed this bottelholder because my first one is broken and I want a bigger one anyway. The first Version ist for bigger bottels up to 70mm diameter and is fastened with straps or velcro strips. If you like I will add a version for…
Hey, this is a car bin for trash. it fits in normal bottel holder holes with a Diameter grater then 65mm. I will youse a kabel wire for the hinge but you can also try to print the bolt. hope you enjoy and pls post your makes :D Category:…
kleines Schild für Zuhause
It is a ball bearing useing 14x 6mm BB´s outer diameter is 46 mm, inner diameter 12 mm and 14 mm high Post-Printing I printed it with original anycubic PLA Filament. It is the second version and it runs good :) Category: 3D Printing
Hi everyone, this is my Construction of an universal filament roll stretcher. You can use it to fix every normal filament spool with holediameter from 50 up to 90 mm. It was a lot of work so pls show me if you like it and press the like…
Post your makes pls ;) Category: 3D Printing
Designed this keychain hope you enjoy i added also the Inventor file (iges) Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0,2 Infill: 50 Filament: ka PLA Category: 3D Printing
Hi, i had the problem that some of my bed leveling knobs are not tight enough so they starts to loosen. So I designed this rotation lock for this Bed leveling knob for the ancyubic i3 mega https://www.thingiverse.com/thing:3411353 It´s…
Hi designed this attachement to trimm my beard. Perhaps any other can use this good prints ;) Category: 3D Printing
Hi, i designed this Clamping jaw for vise to avoid damage to soft parts i want to thighten in my vise. Hope you enjoy too. good print Category: 3D Printing
Hi designed this attachement to trimm my beard. Perhaps any other can use this It´s made for Braun Series razor
Griffe für jeden Verwendungszweck. Konstruiert für IKEA Lack Tabel Cabinet Verwendung mit Rohrstücken oder ähnlichem ca 15 cm lang und Durchmesser Ø20,5 bis Ø22,5 mm Schrauben zum fixieren am IKEA Tisch 3,5x45mm (4 Stk. pro Griff)…
HI there, I created this signs to organize my stuff. hope you enjoy. Pls post your makes ;) Category: 3D Printing
Hi, not tested yet its a vise. You need a M8 threaded rod and M8 nut Category: 3D Printing
Hi, i designed this magnetic bowl for screws and small metall parts. You will need a 102x56x1mm Steelplate and some glue and round magnets (20x3,5mm) Otherwise if you ask I can upload an inlay for other magnet sizes. hope you enjoy and…
Eine Magnetschale für Schrauben und Kleinzeug
Hello, I designed this little tool to fix the extruder in the "open" position so i can just roll the filament up to the spool without having to stop the clamp. Hope you find it as useful as me :) Category: 3D Printing
just created this model out of the single Parts of the remix-mother ;P Category: 3D Printer Accessories
Hey, i designed this case out of a case for a P30 Lite it fits nearly perfekt for a Wiko 3 Lite printed it with TPU Category: 3D Printing
Hi, this is a work in progress. more information will coming soon when i print this thing and change some details Update: added v2. I made the part to assemble together a bit bigger to fit better Category: 3D Printing
To wszystkie aktualnie dostępne wyniki.
