Liczymy pasujące modele…
This is a slimline holder for froooch's EDC knife (and variations thereof, such as the ones I made here and here ) and the KNIPEX Cobra® XS (SKU 87 00 100) mini pliers. The EDC Utility Knife slides over a boss on one side of the holder,…
A Multiboard holder for four snips. Designed for use with these snips . Has a Lite Multipoint Rail on the back. Recommend printing with 0.2 mm layer height 3 walls 15% Gyroid infill Tree supports in critical areas only (see pictures)
A MultiBoard print-in-place broom handle holder for 22-mm diameter objects. This is a simple re-design from my previous version. Based on feedback from AC7SS over at the Multiboard Community, I moved up the Push-Fits to the top edge, so…
A remix of my previous remixed BCG case - this time for CMMG .22LR conversion kits. This version will not fit a standard AR15 BCG. The cap is designed to ride against the shoulder of the chamber insert as to protect the mouth of the…
The original "RAK Meshtastic Starter Kit - No Additional Hardware Case" by pdxlocs has gaps along the bottom edge, surrounding the USB-C port in the bottom of the front cover. These gaps gives access to the reset button and visibility of…
Original description from Space's design - I've added the RST and PWR text by the buttons and, with v2, updated the geometry of the screw bosses as I found them to be undersized and off-center: This Backplate / Bracket provides protection…
A simple remix of @createminds ' HSW Multimeter Holder Uni-T , allowing it to attach to a Multiboard. I moved the HSW attachment points from the side of the original design and added two Multiboard Peg/Click Hooks to the back instead.…
Three designs inspired by phucawf's design. As I was unable to make his design work on my XL650, as it does not have a Thrust Bearing, I designed these versions. The main issue I had with phucawf's design was that the case ejector would…
A 15 mm (0.59") long peg for Multiboard small thread holes. The peg diameter is 4.6 mm (0.1811") except for at the tip where it's just a hair under 5 mm (0.1969").
A MultiBoard print-in-place broom handle holder for 25 mm diameter objects. This is a simple re-design from my previous version. Based on feedback from AC7SS over at the Multiboard Community, I moved up the Push-Fits to the top edge, so…
A simple remix of EpochPrintWorks ' minimalist BCG case. I added patterning to the cap as well as loops for a 4 mm bungee cord as to attach the two together. Note that the included O-ring should be printed in TPU, otherwise use a size…
A very simple 35 mm (1.378") long peg for Multiboard small thread holes. The peg diameter is 4.6 mm (0.1811") except for at the tip where it's just a hair under 5 mm (0.1969").
A MultiBoard print-in-place broom handle holder for 23-mm diameter objects. This is a simple re-design from my previous version. Based on feedback from AC7SS over at the Multiboard Community, I moved up the Push-Fits to the top edge, so…
A very simple cable hanger for Multiboard use. For use with 3 mm cable thickness. Use standard Multiboard print settings.
A smaller version of the original 25mm MultiBoard Push-Fit broom holder. Works well for Smatree Go-Pro selfie sticks, etc. Add painted on supports to the bottom of the Push-Fits, other than that print as is.
A dagger I designed for a family member, based on the dagger carried by the Paedyn Gray character from the Powerless book series by Lauren Roberts . The blade is designed to be printed in translucent PETG and there is a scroll design…
This is an updated version of froooch's EDC knife for use with Stanley 1992 blades. Check out froooch's original post for a more in-depth description and some good videos - highly recommended! I added fuzzy skin to the exterior of the…
A simple spacer to keep the earmuffs separated on Peltor and Sordin, etc., headsets/earmuffs, as recommended by the manufacturer. If the foam/gel cushions are compressed, the insides will set, leading to a decreased seal when worn, which…
An updated version of Chris3DPrints' Deburring Tool Holder for Multiboard, where I changed the hole sizes to fit my deburring tool, then I added a pattern around the circumference of the body and added a fillet. I also made - uploaded - a…
I found that the Solder Assist kit, such as those made by DURATOOL , goot , MEEC, and RND (amongst others) come in handy when cleaning and assembling 3D-prints and when soldering components that go into the 3D-prints. So I created this…
A simple remix of ccgismo's cleaning rod holder, allowing it to be attached to Multiboard, etc., by means of Multipoints. I used PLA, 3 walls, and 10% Gyroid infill. Feel free to increase the infill rate, but unless you have print issues…
This is a magnetic holder for the DJI OSMO Pocket 3 gimbal camera. I started out with Chrizzl's design , but as I did not have any square magnets in stock I decided to modify his design. I therefore changed the bottom to take ten 8x3…
A MultiBoard Push-Fit version of fns720's print-in-place broom holder. Print using standard Multiboard setting. Add painted on supports to the bottom of the Push-Fits, other than that print as is.
A Multiboard holder for a desolder pump. This holder is taller than others I've seen, but has a Multirail slot on the back and a firmer hold of the body, so I designed this. Designed around a pump with a ~20 mm diameter body and a 7.2 mm…
This is yet another updated version of froooch's EDC knife for use with Stanley 1992 blades. Check out froooch's original post for a more in-depth description and some good videos - highly recommended! I added a small paring bar and fuzzy…
A Multiboard holder for a desolder pump. This holder is taller than others I've seen, but I wanted a Lite Multirail slot on the back and a firmer hold of the body, so I designed this. Designed around a pump with a ~20 mm diameter body and…
A simple update to Rukhs lid design. I added a small loop for a bungee cord or for a 4 mm screw.
A 1x1 Multibin Lid with a separation grid for ease of organization. This version has a “deeper” cross-member for increased durability and separation.
A Push-Fit interface for attaching 1H-height Multibins, etc., at a 30-degree angle to a Multiboard. Accessories with Lite Multirails will snap into place for a secure hold. Print using standard Multiboard settings (0.2 mm layer height, 3…
This is an improved version of my original Multibin 1x1 - Drop-In File Needle File Lid. The design is a parametric 1X1 Multibin lid with holes and bosses to hold needle files. The parametric values are: Number of files Handle diameter…
A simple glue stick dispenser for the Bosch Gluey 7x20 mm ministick glue sticks. Has two columns in case you want to store two different colors separately. Original file includes a simple lid, which is kinda lose, so there's version two…
This is a parametric Multibin lid to hold needle files. The parametric values are: Number of files Handle diameter Multibin height (0.5 or 1 recommended) I recommend choosing your bin height based on the length of the file handles. The…
A universal drop-in lid for Multiboard 2x1 bins where I added holes and bosses for eight (8) Pica pens. I recommend using Multiboard 1.5 or 2.0-height bins and standard Multiboard printer settings.
A Lite Multirail interface for attaching 1H-height Multibins, etc., at a 30-degree angle to a Multiboard. Accessories with Lite Multirails will snap into place for a secure hold. Print using standard Multiboard settings (0.2 mm layer…
A simple remix of Gadreel's Multiboard Gluestick Tray . I removed the T-bolt screw hole, added a Multipoint rail slot, and filleted the exterior edges. Designed for BambuLab's glue sticks, but may also fit others.
A 1x1 Multibin Lid with a separation grid for ease of organization.
A simple upgraded version of David Holečko's Bosch Gluey wall holder. I just did a quick and dirty fill of the screw holes and added a Multipoint rail slot on the back, for use with Multipoint rails and Multiboards. In the first picture…
A Multiboard 1x1 bin lid modified to hold four Pentel FloaTune 08 pens
A simple hanger for hanging a Dillon Precision Casefeeder Plate Assembly onto a Multiboard wall.
Description I recently installed Mdesign's Side spool holder for P1S, X1C on the left side of my P1s only to realize that it left no room for jusutus' 4-in-1 PTFE Adapter , without running PTFE tubes like a madman behind the machine. So I…
A simple Multibin insert for holding three RAK Wisblock 19007 boards when doing firmware updates, etc. The three boards are stacked height-wise so that the battery and solar panel connectors are not obscured by the board in front, and the…
A simple puck-shaped stay for holding a tyre iron in place in the trunk of a car. Designed for using five 20mm diameter Velcro pads. There are also small indentations on the sides, so a bungee cord, etc., can be used to secure tyre iron…
A 1x1x1 Multibin Insert with a 10 mm internal front fillet for easier scooping of content
Added holes and bosses to hold four Pentel P200-series pencils and four Pentel FloaTune 08 pens, converting the lid into a pen holder. Instructions Print using standard Multiboard settings 0.2 mm layer height 3 walls 15% infill Print face…
Simple Multiboard glue stick holder. Updated the design with a Lite Multirail slot on the back so that the holder can be locked in.
A remix of the 3x1 - Unversal Drop-In Lid to hold a 12-piece set of Sakura Micron Manga markers, or this Chotune set as sold on AliExpress . The lid is also marked with corresponding pen size, to easily identify which pen is missing. From…
A parametric mixing cup stand for preventing accidental spills from knocking over the cup. The original dimensions match the cups in this Amazon kit , but using the parametric version you can adjust the bottom diameter and the wall angle…
Integrated the Multiboard Pegboard Click into a simple hanger for a pair of Qianly Indian Clubs . Print using 0.2 mm layer height, three walls, 15% Gyroid infill, and tree supports.
A remix of the 3x1 - Multibin Top to hold a 12-piece set of Sakura Micron Manga markers, or this Chotune set as sold on AliExpress . The lid is also marked with corresponding pen size, to easily identify which pen is missing. This top…
I keep a large plastic bin in the trunk of my car. However, it tends to slide around if it's not supported in some way. To this end I designed this round tie down, which is designed for five (5) 20mm-diameter Velcro pads to hold it in…
A simple Gridfinity-based fixture for attaching mounts to Aimpoint Micro T-1 red dot sights. I designed the fixture to have the center of balance of the sight as centered as possible within the constraints of the fixture. The design also…
A simple hook for hanging stuff onto the side of an IKEA Muskan storage stool https://www.ikea.com/se/en/p/muskan-storage-stool-white-00360587/ . Fusion360 and STEP file enclosed. Go nuts! Note: Updated the f3d-file so that the hanger…
This is a funnel for filling beans into an OrkeyDolk® External Adjustable Manual Coffee Grinder before you have your first life-saving cup of java in the morning (i.e. when your aim is still off and your still suffering from the caffeine…
An updated version of my parametric mixing cup stand for preventing accidental spills from knocking over the cup. This version has an added window so that you can see the measuring scale on the cup. The original dimensions match the cups…
A Rail Pop-In for attaching a Multibin , or - in particular - the DJI Osmo Pocket 3 base I've previously uploaded, to a Go-Pro or similar hinge mechanism. Use standard Multiboard settings (0.2mm layer height, 3 walls, 15% infill).…
To wszystkie aktualnie dostępne wyniki.
