Liczymy pasujące modele…
Designed this for my Creality Ender 2 pro. It can be printed on every printer. Update 12.12.2022: New version V2 with engraved L/R added. Check out the other ender2pro upgrades I have designed! Cover, Creality Ender 2 pro by eSeL |…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Easy to print dummy model of the iPhone 15 Pro Max. Print as oriented and no supports needed. Perfect fit in original case.
Wydruk około 1,91 €–2,34 € nettoWstępna wycena jednego wariantu
Jump and grind how you want and where you want. At any time. It is modular, so you can start small and go big over time! Update 2024-01-21: 3rd addon uploaded! Thanks for the first makes :-) Transition from low to high block, small ramp…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
Jump and grind how you want and where you want. At any time. I added some brim to the 120% version to make the thin edge print easier. Layer Height: 0.2mm Walls: 3 or 4 Infill: 20% to 30% Top/Bottom Layer: 6 to 8 Material: e.g. PLA or…
Wydruk około 5,48 €–6,70 € nettoWstępna wycena jednego wariantu
Small, simple building you need on your model railway. It is for the train driver, engineer or some linemen. Scale H0 / 1:87. Print all pieces and glue it together. Layer height: 0.2mm Support: No I printed it with white PLA. I primed and…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Designed for my Creality Ender2 pro. I don't want to touch the heatbed when it is hot, to move it. Time will show if Creality sample-PLA is ok. PETG or something like extrudr GreenTEC (pro) might be more heat resistant. Update 19.12.2022:…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
This test is designed for Prusa Mini+ with enough space for prime line and some skirt lines. It can be printed on every printer. -------------------------- Habe den Bettlevel Test für den Prusa Mini+ entworfen. Es gibt genug Platz für die…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Small, simple building for H0 1/87 scale modelrailway. It could be a shelter for railroad worker but also a garden shed. Print all pieces and glue it together. Depending on your printer, support and brim can be useful for the walls…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
Sometimes your minifigure has to carry more stuff… This is where this belt clip for one or two items comes in handy! The "must have" in every battle or when putting out fires. -------------------------------------------- Printing…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Easy to print simple desk organizer with hexagonal shapes. It fits on small printbeds but at the same time offers plenty of space for pens, tools or whatever else you want to store. Carefully designed dimensions to have no mess with the…
Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu
I got an Ender 2 pro and want to see if I can upgrade hardware, electronics and software to get an E3D Revo Micro running. Make the Revo Micro and the fans fit to the printhead → version with one part cooling fan available at the moment I…
Wydruk około 2,35 €–2,87 € nettoWstępna wycena jednego wariantu
Small holder to store my sewing machine oil bottle at IKEA SKADIS. I use the universal hook system. Material: PLA or others Layer height: 0.2mm Perimeter: 2
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
Designed for twelve 17ml (25mm) dropper bottles and one water cup. ---------------- Für zwölf 17ml Flaschen und einen Wasserbecher.
Wydruk około 3,06 €–3,74 € nettoWstępna wycena jednego wariantu
Designed for eight 17ml (25mm) dropper bottles, one 60ml (36mm) bottle and eight brushes. ---------------- Für acht 17ml Flaschen, eine 60ml Flasche und acht Pinsel.
Wydruk około 2,04 €–2,50 € nettoWstępna wycena jednego wariantu
Jeans button replacement with M3 countersunk head screw and nut. I needed this button when the one on my Levi's jeans just fell off. Different versions. - Version 3: Insert M3 nut during print. No visible screw afterwards. - Version 2: M3…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
All those test prints and filament swatches - what do you do with them? Make something sustainable out of your test prints! With the KAPLA-sized test prints and filament swatches you can combine them with your wooden bricks or use them on…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
Print the two parts and add: - 2x M3*40mm screw, cylinder head (depending on phone 30mm could be feasible) - 2x M3 nut - 1x Tripod ¼ inch threaded bushing / melting nut (e.g. by ruthex) Melt the tripod thread into the bottom part, then…
Wydruk około 1,17 €–1,44 € nettoWstępna wycena jednego wariantu
Small, simple corrugated metal building for H0 1/87 scale modelrailway. It could be a shelter for railroad worker but also a garden shed. Create your own style: Walls with different window openings included. Print all pieces and glue it…
Load for freight car or goods wagon in scale 1:87 H0. Layer height: 0.2mm Support: No Print all pieces and glue it together. I printed it with white PLA. I primed and painted it with Vallejo Model Color. Directly printing in right color…
Found some accumulation of dust and debris at my Creality Ender2pro spool holder fixation. This cover prevents the accumulation. I printed in Prusament PLA Lipstick red, 0.4mm nozzle, 0.2mm layer heigth. No support, no screws, no tools…
Print all pieces and glue it together. Use transparent filament for the porch/veranda roof for the best appearance. Door and window frame with 2x in filename will be needed twice. Can be painted before or after gluing. I printed it with…
Insert for IKEA Skadis tray to store sewing machine needle boxes. I tested with "Schmetz", "ORGAN" and "akra". Others should also fit. I was inspired by the model of @TomDoe, but I designed it from scratch in a completely new and…
The original adapter to attach a lanyard to the mobile phone was broken. I designed a printable replacement. I started with a 0.6mm version, then made it 1mm in the stressed area. Use at own risk. Be careful with material selection and…
I remixed the spoon of nkitani with longer handle and in a 25ml and 30ml version. Printing of the first layers was not so easy due to the overhangs of the radius. This is why I made a version with 0.8mm cutted off the bottom. Now it is…
Found some accumulation of dust and debris at my Creality Ender2pro printbed motor fixation. This cover prevents the accumulation. I printed in Prusament PLA Lipstick red, 0.4mm nozzle, 0.2mm layer heigth. No support, no screws, no tools…
Print all pieces and glue it together. Can be painted before or after gluing. I printed it with white extrudr GreenTEC, but I think normal PLA would be the best. I primed and painted it with Vallejo Model Color. Door and window frame with…
This is a easy to print alternative handle for the Creality Ender 2 pro. I printed with 4 walls and strong infill. Prusament PLA Lipstick red @0.2mm layer height. Check the strenght of your printed part before relying on it. Check out the…
I had to replace the broken box of an 30 years old “Quartett” card game. Printed nice in extrudr PLA NX2. Card size is appr. 65mm x 100mm. Scaling in slicer could work. ----------------- Ich musste die gebrochene Hülle von einem 30 Jahre…
I had problems removing the support from the original by “ Satellietje ”. My remix is without support. I remixed the roof tiles and the roof itself. I cutted the roof in 2 parts to print it flat on bed. I glued it afterwards. I printed…
My Ender 2 pro wobbled on the desk when assembled. Found out that a cable tie at the bottom causes this. Based on the idea of @Denitz I made a design which requires no support. Layer height: 0.2mm Support: No Check out the other ender2pro…
Easy and fast to print C-Clip for your bike brake hose or derailleur / gear cable. Print all five and see which fits best. PETG might be better for outdoor use, but PLA can also last long.
My Ender 2 pro wobbled on the desk when assembled. Found out that a cable tie at the bottom causes this. I made my own cable guide, now it stands perfect. ---------------------- Mein Ender 2 pro hat auf dem Tisch gewackelt, nachdem ich…
QUIGG DK-3015r Cover for the battery compartment of the scale. Abdeckung für das Batteriefach der Glas Küchenwaage QUIGG DK-3015.
I designed this holder, to hang a razor next to the bathtub. In a second version I added a roof, to protect the blades from dripping water. No supports, 0.2mm layer height, PLA. Works for me. ----------------------------------------- Ich…
Test to check if all axes have a right angle to each other. You can check the 90° angles and the dimension accurracy of all axes. Layer height: 0.2mm Perimeters: 2 Infill: 10% Material: e.g. PLA Different sizes available to fit your need.…
Adapter to mount a bike headlight to an ahead spacer mount. I have a Supernova Spacer Mount and a Busch + Müller (bumm) IQ-XS headlight. Could also fit to other combinations. Print with support on bed and model. I used PLA, but for…
The IKEA RIBBA frame is so deep, that I cannot hang it with a normal nail. The design by PennybridgePioneer is promising, but did not fit with my version of the RIBBA frame. This is why I made my own design for a wall mount from scratch,…
Cover for the power supply switch of Anycubic 4max pro and pro2 This is to prevent dust and filament to get into the powersupply at the line voltage switch. --------------------- Abdeckung für den Netzspannungs-Umschalter am Netzteil…
Printed some stands to convert metal furniture door handles into great rail for finger skateboards. I added also printable rail, if you do not find suitable handles. No support, PLA is fine, 0.2mm layer height, no support.…
The main part, which holds the frame together and enables the folding mechanism broke. The rest of the table is still fine. I designed this replacement part which now gives the table a second life. My aluminum camping roll table is from…
I use an alternative spool holder and wanted to cover the remaining hole of the stock spool holder. Fits for 4max pro 2 and the original 4max pro. --------------------- Ich nutze einen alternativen Spulenhalter und wollte das Loch vom…
My trousers button broke and I needed a quick replacement. I made the button in different sizes and with 2 and 4 holes to try, which fits best for my needs. Searching with Google for “how to sew a button” helped me to finalize my project…
Simple 18mm button with four 2mm holes for sewing. I used it for my shorts in summer, when the old button broke.
Desktop Christmas Tree. Can be used with or without LED light chain. Print the three parts with PLA or similar in the color of your choice. ------------------------------ Weihnachtsbaum als Dekoration für den Schreibtisch, die Werkbank…
Replacement for a broken venetian blind cord holder. It fits to different brands and variants of jalousies. 2x countersunk M4 screws. Cord/string diameter approx. 3.5mm to 5.5mm. Material: PETG Layer height: 0.1mm to 0.25mm No support…
Press fit stand for the Lexivon LX-770. It can be removed for storage. Stand is flat enough to fit into the transport case of the soldering iron. PLA, 0.2mm layer height
This is a easy to print E3D Revo nozzle holder for the alternative Creality Ender 2 pro handle. I printed with 4 walls and strong infill. Prusament PLA Lipstick red @0.2mm layer height. You need the handle from…
Easy to print headphone holder. I printed it without infill. I fixed it with a command strip to the back of my monitor to have the headset out of sight, but easy to access if needed.
Small project with Arduino Nano, Touch Button and NeoPixel or other LEDs. Print Instructions Print the “Bottom” and the “Cover” with the filament of your choice. Print the “Top” with clear or translucent filament to let the LEDs shine…
These are endcaps for the rack of the Omnium Mini cargobike. It is to protect the paint or to add a unique color to your bike. For the whole rack you need 2x short and 2x long.
Easy to print headphone holder. For headphones with thin frame.
To wszystkie aktualnie dostępne wyniki.
