Liczymy pasujące modele…
Totoro is a character from My Neighbor Totoro , a lovely movie from Studio Ghibli. This pen holder was designed on Nomad Sculpt and features a funny big-mouthed Totoro inspired in this scene from the movie: Preview Printing Advice This is…
Wydruk około 4,82 €–5,89 € nettoWstępna wycena jednego wariantu
Moo Deng (born 10 July 2024) is a pygmy hippopotamus living in Khao Kheow Open Zoo in Si Racha , Chonburi, Thailand. [1] [2] She became a popular Internet meme at two months of age after images of her went viral online in September 2024.…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
This is a simple model designed to test the Prusa MMU3. It uses all 5 filaments to create a palette identifying each spool by its number. Its definitely not the prettiest model you will print with your MMU3, but it is certainly useful to…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
We are obsessed with Totoro over here, so after watching the movie a 4th time just this weekend, I had to give this a try. Designed on Nomad Sculpt, the models print well without supports both in mono and multi color. Check also my other…
Wydruk około 6,54 €–7,99 € nettoWstępna wycena jednego wariantu
A Chibi design of Goku from DragonBall. Printing Advice This model doesnt need supports, but you should add a brim (I recommend changing the brim width to 8mm). Printed at 0.20mm (speed). The included pre-sliced file has settings to print…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
I designed this model based on my own French Bulldog named Josefine Rose, a.k.a. Josy :) Designed on Nomad Sculpt, this model prints without supports, but a brim is advised. Shes a sweet girl with black fur and big brown eyes, who is…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Flourishing. On her lane. Moisturized. Unbothered. Capybara! It really floats: Printing Advice Pre-sliced files included for both single and multi color print. 5% infill (grid) 0.20mm (quality / structural) Seam set to “rear” For MMU: No…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
After my cute Moo Deng model became popular, I felt it was only fair that I also represented her other side. So I present y'all with her famous bite of power 100 and damage 0 :D Printing Advice It is advisable to use paint-on support…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
Turn your fingers into little monsters, because why not? Designed on Nomad Sculpt. Three sizes included: Small: ~12mm diameter Medium: ~15mm diameter Large: ~17.5mm diameter Print Tips I printed these using PLA (Prusament Galaxy Purple)…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Mona is GitHub's famous Octocat mascot. This is a fanart design based on Mona's classic look, but in Chibi-style. Including laptop! Printing Tips I printed these in PLA with 0.20mm speed, 15% infill, seam set to rear , and enabled brim .…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
This is a simple model I designed for my daughter to containerize her toothbrush =) Designed on FreeCAD. Printing Tips I printed these in PLA 0.20mm structural on the MK4, with brim and 100% infill (this actually doesnt make much…
Wydruk około 2,97 €–3,63 € nettoWstępna wycena jednego wariantu
I recently reached the mark of 5k downloads on my models, and I realized there is no official model for the Star of Design badges. So I decided to design my own badge =) According to Printables, the Red Giant (Star of Design Level 5)…
Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu
From the Minions Fandom Wiki: "The Minions are small, yellow, capsule shaped creatures, predominantly male, who have one or two eyes that were created by Eric Guillon. (...) They bring much of the comedy in the film, and they are known as…
Derpy is a friendly yet slightly scary character from the movie KPop Demon Hunters. It is a big feline with blue fur and big yellow eyes. He seems to be obsessed with turning objects back in place when they get knocked down. Designed on…
A ghastling - or Happy Ghast baby - is a new mob introduced in the latest Minecraft update called “Chase the Skies”. This update has been much anticipated, since the Happy Ghast introduced a new way of transportation where players can fly…
The (in) famous Stitch from Lilo and Stitch <3 I shared details about the design and printing process in this video . (Unfortunately, YouTube embeds are not working here at the moment) Printing Advice This model requires a bit of support…
This SUPERSET includes ear plugs and tunnels from 6mm to 30mm diameter and the original parametric FreeCAD file that you can use to create any size of plugs and tunnels. Quick and easy print! Print a pair for each nice filament you have…
For Minecraft fans and enthusiasts :) Recommended Print Settings These beads were designed to be printed in two colors, with a single filament change. The .3mf files have the settings pre-baked, including the filament change. Printed in…
In this lovely variation of Derpy Cat , he is teleporting out of here, but he can't take his eyes out of something… I wonder what that is?? Designed to look like it is sinking into the surface it sits on. This is a remix utility model,…
Her name is Ponyo. She likes to eat ham. And she can do magic! Ponyo is a character from a Studio Ghibli movie . The movie tells the story of a goldfish-like creature that turns into a little girl :) Printing Advice Ponyo and bucket print…
Inspired by the MALM bedroom series from IKEA, this bedroom set was designed for LOL dolls (fits well 10cm dolls). Includes the following models: bed with space for two drawers small drawer for the bed (print 2 of these) chest with space…
Santa Frenchie is coming to town! Inspired, as usual, by my French Bulldog named Josefine Rose (check last picture for reference), this model will bring a smile to kids of all ages (from 4 to 104+). Printing Advice 0.15mm (speed) for…
Waking up to a good cup of coffee is essential. It gives you an extra reason to… wake up! A good coffee machine is important in any kitchen, but especially when you have small kids 😅 mommy and daddy will not function well without their…
I designed these models for my daughter, since she is absolutely crazy about capybaras. Mommy capy and her two pups will brighten the day of any capybara lover! And best of all, you can actually pile them :) Designed on Nomad Sculpt,…
Kuromi is a rabbit character from Sanrio, part of the My Melody" universe. Featuring a punk-ish style and often acting as the antagonist of My Melody, she became very famous. A quote that describes her very well and explains that she's…
I've been wanting to model Kuromi for a while already, because I love her punk style and attitude. From the Hello Kitty wiki: “Kuromi is a rabbit character from the Japanese company Sanrio, and part of the My Melody universe. (…) During…
“Carranca” is a wooden-carved figurehead that used to be attached to boats sailing the São Francisco river in the Northeast of Brasil, serving as protection and also to identify merchants and rival tribes. These figures were believed to…
Cute pixelated heart earrings made especially for the Minecraft Movie ❤ This is an easy single-extrusion print with two colors changes. Resize as desired! Printing Advice 0.20mm Structural No brim, no supports 15% infill Color changes The…
Text2Stamp is a little open source project that includes a parametrized OpenSCAD model and a few supporting bash scripts to facilitate batch model creation. You can use Text2Stamp to create your custom stamps in any of these ways: If you…
Frenchies are out of this world! As the mama of a little French Bulldog diva, I have modeled her wrinkly face quite a few times – she is one of my favorite subjects to design. This post has my latest versions of Josy. I made 3 variations…
I designed this simple Carnival mask as a last-minute prop for my kid's Carnival party at school. The whole idea is that the mask is easy to print and has a nice surface to be decorated as you desire! This was a big hit with the kids,…
An elegant skull model designed to be printed without supports. The openings in the eyes allow you to see the contents of the pot / holder. Print in a dark color and add colorful pens to make it extra eye-catching! Printing Advice 0.20mm…
The adorable Red Panda Mei Li from the Turning Red movie <3 Designed with love on NomadSculpt =) Printing Advice This model needs a little bit of support on the tail. The included .3mf file has pre-painted supports already set up, just…
A modular jewelry set with interchangeable keycaps that allow you to personalize your set and change its looks whenever you want - just change the keycaps and youre done! The keycaps were designed to look like polished stones / gems. The…
Steven Universe is an American animated television series created by Rebecca Sugar for Cartoon Network . It tells the coming-of-age story of a young boy, Steven Universe ( Zach Callison ), who lives with the Crystal Gems—magical,…
Everything you need to create custom nametags for all occasions! Choose from a minimal model that you can use as a name plate or a keychain model to create nametag keychains. Just use some crafts glue or super glue (preferred) to glue the…
Designed to be printed in single-extrusion multicolor with one or two filament changes, these keychains feature the official FIFA code for each country participating in the World Cup 2026. Printing Advice 0.20mm (speed) 15% infill one…
To wszystkie aktualnie dostępne wyniki.
