Liczymy pasujące modele…
Philips Avent camera holder for baby cot from Ikea MYLLRA or similar with 22mm thick head or foot plates. All parts can be printed without a support. You need a M5 insert and a M5x10 hexagon socket screw for mounting. The two feet are…
This spacer provides 2cm clearance between handlebar bag and the handlebar. So that can be driven in different postures. This spacer is created for a handlebar with about 32mm diameter. The mounting strap has a width of 25mm. There are…
I have created a modified version of the P2 pro cover from: https://www.printables.com/de/model/374516-infiray-p2-pro-thermal-camera-case The inlet from the original packaging was taken over with the dimensions of 60x50 and another…
I have created a holder for four measuring tips. These can be attached to the VESA screw points of the oscilloscope. The negative of the probes is adapted for Rigol DHO probes. It is suitable for VESA 100x100 mm You need 2x M4 threaded…
This is a mount for the Infiray P2Pro with microlens on a stereo microscope with a diameter of 54mm. The working distance of the stereo microscope is 100mm and the mount is approximately adapted for the P2Pro with microlens. This allows…
This is a housing for a baby camera for the installation of a Raspberry Zero with camera and infrared light. The stand is fixed with a M4 nut and a M4x12 screw. The Raspberry and the camera are fixed with M2 threaded inserts. The model…
Adjustable mount for Rasperry wide angle camera. Flex cable length 30cm. The mount is based on the universal ball joint from https://www.thingiverse.com/thing:4739696 Ball can be fixed with M3 countersunk screw in camera holder over M3…
Based on a Toaks 550ml titanium pot with a 100g gas canister. under the canister is a BRS3000 and a small BiC lighter.
I have created a projekt here that simplifies the unwinding of wool threads from bobbins when crocheting or knitting, etc. The bobbin is put on and a ball bearing simplifies the unwinding. A roller ball bearing size 6701 (Di 12, Da 18, h…
The model allows the integration of USB type C on your head tube (Ahead system). With 3mm LED based on the charger "Forumlader". For which this mount was designed by Wahoo. Optionally, a model with a Wahoo Element Bolt mount is attached.…
I have combined two interesting nozzle cleaning approaches in one part. For cutting the silicone tube please follow the linked version to cut it to size. The silicone hose length is the 19mm version. Brass brushes can be cut to size for…
The stand is 15mm shorter to avoid collision with the print head and the exhaust opening has been slightly enlarged. In addition, other small optimizations for better insertion. As with the old support, the body tilts slightly towards the…
Tube for LEGO Duplo 4973 Harvester The upper side of the tube rests on the print bed. Due to shrinkage settings, the connection dimension of the tube may not fit correctly. Surface smoothing can be adjusted. I printed it in PETG.
These are protective caps for leica trinovid. Fits the Leica model shown. The caps were attached to the carrying strap with small straps and a cable tie as a loop for a lanyard. The caps are printed from TPU for AMS. This material has a…
The basic opening angle is 5mm in diameter and 6mm in diameter for threading. A 4.5mm through-hole with a countersunk screw is provided for screwing to the ceiling. The pressure can be realized without support.
This is a bracket for an LED headlight for bicycles or e-bikes. The bracket is suitable for handlebars with a diameter of 32 mm. A recess for an M5 nut or M5 hexagon bolt is provided to hold the lamp. M2 screws and M2 threaded inserts are…
For the Flex BSE 14-3 100, there is a dust extraction hood available for a certain price. Here is a self-designed and 3D. A 32 mm connection is provided for the dust extraction. Custom sizes are available upon request. A standard Mink…
To wszystkie aktualnie dostępne wyniki.
