Liczymy pasujące modele…
This is a complete remodel to ensure it adequately supports the Raspberry Pi Zero 2 W, as the original model interferes with some resistors/diodes on the pi. This remodel also add a bit more clearance for the headers as I found that some…
I found a printable sign of the Prancing Pony Inn logo on Thingiverse, but not here. Since I didn't want to just rip the author off on thingiverse, I decided to make the model myself from scratch based on a sign I found online, using…
THIS IS NOT A PRINT MODEL This model is intended to be set as a print bed model in Prusa Slicer. It does not include a texture. Category: 3D Printers
Cover photo is printed and painted by Firetail I was unable to find a good 3D model of the Green Dragon Inn sign from LOTR. So I decided to trace a sign I found online in Inkscape and create the model myself in Fusion360. I've included…
I needed a cable grommet for my Ikea Platsa closet, where I have my printer, and all the other grommets I could find where either impossible to get to fit right or too large. So I made my own. It is made with a 30mm inside hole diameter,…
I was unable to find good models that could be used a easier to modify model of the focusing ring, mainly because I found the grip on the ring very lacking. So I made one based on measurements taken from the focus ring stl files. Included…
While there are already existing models for clips for Field Notes, I found them all a little bit too loose, and I wanted a simple clip for my pen as well. I recommend printing the models with a brim, since they are rather thin and could…
I needed a proper wall mount for my main TP-Link Deco x90 router. I found two that I linked, but I wanted parts from both. While I am marking this as a remix, it is still a complete remake, using the two original models as inspiration…
The original model would require a lot of support, which would lead to worse surface quality. Using Prusa Slicer 2.6.0 (alpha 5), I split the base of the Neutral Dude from his body, and made them connectable via plugs. This way the only…
I had a request to make a dual-sided “coin” of the Alcoholics Anonymous for a friend, and because I had two colors that fit very closely to the colors of some of their material, I decided to make it dual color. Printing instructions Print…
The original model had the PTFE tube feed directly into the print, which works fine, but I wanted one that supported PTFE couplers. I have not tested it yet, but I modelled them so they should fit. There is a version for the M10 coupler…
I liked the original coaster design but wanted to add a few tweaks, so the following has changed: Total thickness reduced to 2.6mm Added more detail to wolf, star and swallow based on images found online. Added pre-sliced gcode with color…
The Skadis mod for the Core One L made by @lostinthesloths worked great, with the exception that the build plates would rattle in the rails when printing something that caused a lot of vibration. Looking at remixes for the original Core…
This is a simple remix of the base, making it usable as a small coin bank. While I consider this a remix, I did have to fully redesign the base in Fusion360 so I could more cleanly make the opening and lid. It will require supports in…
I wanted better clearance in my enclosure (Ikea Platsa), so I shortened the supports for the xLCD by 10mm. The hole geometry for the square nut should be identical to the original, so you can use the exact same hardware. Assembles and…
While looking at https://www.thingiverse.com/thing:4966317 I wanted to recreate the entire drawer, so that I could squeeze even more use out of the space :) So far this has resulted in this model, the magnet slots in the back has been…
This is a very minor remix, as my magnets (5x2mm neodymium) have a strength of approx. 680 g (approx. 6,67 N), which made opening the box more difficult as significant force was required to open it, often resulting in the dice scattering…
Update 30/7-2018 I wanted to make a version that wouldn't require registration pins or gluing parts together, so I've added files for a version that uses M3x10 screws and nuts, the countersunk holes are all hex shaped to keep the parts…
To wszystkie aktualnie dostępne wyniki.
