Liczymy pasujące modele…
A simple, easy to assemble model of the Thermal Katana from Cyberpunk 2077. The katana is 1.3m long. This version does not have room for electronics. Some filing/sanding may be necessary to fit parts together depending on your printer.…
These are the files to make a full-sized bow from the Horizon: Zero Dawn video game. These are just the files for the 3d printed mechanical parts of the bow - I expect a great deal of finishing work and other materials would be necessary…
This is a model of a spaceship. Everything is manifold and should print well. The engine model is many overlapping parts - all of which individually should be manifold. You may need to "separate connected surfaces" in your slicer to avoid…
Here are cleaned up files - they should pass all manifold checks. I also found files for the bent arm and the blaster! Files are also posted as halves for (potentially) easier printing. You should mirror the parts as necessary. My…
Spherical gear with monopole gear Inventor for the spherical gear, Blender for monopole. A Python script to rotate the spherical gear cutting the monopole. https://gist.github.com/pyrohmstr/aa7fa82767a813a6ddc6358922ba7d54 You'll need to…
Modeled in Blender and edited for printing. Pretty simple to construct: Print a Top, Mid, Bot, Shroud, and Knobs (2) Glue together I've included the larger parts broken up to print on smaller printers as well as larger parts. I can print…
This is a super simple vertical laptop stand that can be easily scaled to any sized laptop. I print mine slightly undersized so they hug the laptop tightly. The laptop pocket in the stl is 1.25 inches - so to scale for a different sized…
An irregular planetary gear set inspired by a hydraulic motor posted to Reddit Gear shapes were generated using Python in Blender and then numerically hobbed. They can be scaled as appropriate. The planet gears are slightly tricky to…
My printed gears kept stripping out so I wanted to replace them with steel gears. There is a set on amazon that roughly matches the dimensions used in the original -- "Hot Racing STE258 Steel Pinion and Spur Gear Set (18T/58T 32P)(Blue) -…
This pour spout screws to the top of Sparkmaker resin bottles and has a drip-catching design so you can shake the bottle, let the resin drain back, and fill the vat without getting resin everywhere. The base screws onto the bottle and has…
There is a recessed spot on the back for a command velcro strip. Print with the wall-side down. Doesn't need supports. Print Settings Printer: Rigidbot Rafts: Doesn't Matter Supports: No Resolution: 300um Infill: Anything Category:…
Small stand for an iPhone SE 2020 - shouldn't stick but might need a bit of cleanup if it does. Print Settings Printer Brand: Dremel Digilab Printer: 3D40 Rafts: No Supports: No Resolution: 300 Infill: 20 Filament: Dremel PLA Category:…
These are the files I used to make a ping-pong ball display! This is for somewhat advanced makers and assumes some knowledge to put everything together as well as access to tools. It attempts to simplify other designs out there for…
This is a tiny clock built around a small OLED display. Easy build in just an hour or so! Things you need to buy: 0.96" Inch I2c IIC Serial 128x64 Oled LCD: http://a.co/1urMxg3 Things from Adafruit: Breadboard-friendly SPDT Slide Switch -…
Modifications for the MOST Open Source Syringe Pump http://www.appropedia.org/Open-source_syringe_pump Instructions Printed on a RigidBot in PLA w/ .2mm layer height. Sliced with Simplify3D. Instructions including Arduino control are…
This is a standalone console I've put together. It prints in three parts but is easily expandable. The parts are simple: Raspberry Pi 3 B+: https://www.adafruit.com/product/3775 Stereo Speaker bonnet: https://www.adafruit.com/product/3346…
This is a simple edit to make the Darwin Mini head large enough to fit two Adafruit neopixel rings. They're powered by a Gemma (but any micro will work). https://emanual.robotis.com/docs/en/edu/mini/ https://www.adafruit.com/product/1586…
I designed an inner frame for the Pi Grrl2 so that all of the electronics are held together as one unit. That unit is then attached to the front of the case and the back is just a cover. Makes assembly much easier. Cases uploaded reflect…
I use FLOWALISTIK's little low-poly bulbasaur as a material test for my printer. I thought having some push-pin shelves would be nice to display my little army. There are recesses for their feet to hold them in line. Link to bulbasaur:…
A clip that fits on the RigidBot frame and holds one wire with some wiggle room. Edit: Fixed the scaling. Should be good now. Instructions Sliced with Cura .2mm layer height 80mm/s with 10% infill with PLA, although anything should work.…
A friend broke her leg fighting off a shark and needed a way to attach a water bottle to her crutches. We designed this in Blender and it worked out well enough that we felt it was worth sharing! Should work on any 3/4" pipe and can be…
I wanted a mount for my E3D on my RigidBot that works with Laser Weld Design's fully constrained block. I liked Walter's idea (and used it as major inspiration) but I wanted a few features his didn't have. I didn't want to give up any…
To wszystkie aktualnie dostępne wyniki.
