Liczymy pasujące modele…
Adding a quick description for now. Elegoo published an adapter to allow for use of flexible filament with their CANVAS system for the Centauri Carbon 1 (and also CC2). However, it has a main problem: it does not work with the fittings…
Parametric hub adapters now available. Description This is a drybox I have been working to make on and off for the past… year now (eeek!). Since getting my Neptune 4 Plus about six months ago I started focusing on the design and getting…
Description Now version 1.1 Here is a desiccant holder for my cereal box drybox . Slots in for refilling or replacement. The lid can be opened while in place, so no need to remove completely to empty and refill. Since I might use my…
Description A filament guide for moving spools off of the top of a Neptune 4 Plus/Max/(pro?, normal?) while securing the sensor yet allowing for free movement. The top filament guide and holder for the runout sensor should work for any…
A very simple tolerance test for people wanting to dial in their settings for print-in-place prints, etc. I found a few interesting test pieces, but they would take around four hours to print on my printer. This one is only 18 minutes on…
Updated Oct 20, 2025 Description A simple coupler to connect two sections of PTFE tubing via two PC4-M10 fittings. I'd downloaded some to try but the threads were too large to take the couplers I have, so time to whip up my own. The…
Description Updated Oct 19, 2026 With the seasons changing (Winter here in the northern hemisphere, and Summer in the southern) I needed a better way to get my 3D printer fumes (FDM) out the window. Since I used standard 4" heat resistant…
Updated to fit a little better My wife finally got me back in to fountain pens. Chose clear pilot Kaküno as my starter which helps see the level of ink, etc., but they have two issues: it was hard to tell blue ink from black my wife…
Simple light-duty cane A collapsing cane/walking stick that can be locked open or closed, originally intended for cosplay and light duty use. Should be helpful when bulkier canes are hard to manage. I was going to also be uploading the…
I recently upgraded to a Neptune 4 Plus, and noticed the tensioners reportedly have a tendency to loosen. I tried a few of the existing tensioner locks, but they seemed to have nothing to prevent them from sliding off due to vibration.…
update 2026/06/08 - reordered the Holder and fixed the Spool bodies to work with latest versions and when set to spool_iw of 'w 63'. Using FreeCAD v 1.1.1 update 2026/02/08 - fixed clip ends on 60° model. Overview This is a basic…
I recently upgraded to a Neptune 4 Plus, and noticed the tensioners reportedly have a tendency to loosen. I tried a few of the existing tensioner locks, but they seemed to have nothing to prevent them from sliding off due to vibration.…
My wife had gotten into using fountain pens the last year or two, and asked me if I could design her something for using ink samples. There is the Ink Miser Ink-shot one can purchase that is not uncommon to see used, but it has a few…
Updated Aug 31, 2025 Overview A customizable base for holding painting clip sticks that can be adjusted as needed. The number of rows and columns can be adjusted to get different sized bases, though a couple of handy sizes are supplied…
This replaces just the turret from the original Halo Warthog by Kmech Toys. It is two separate pieces that are in their printing orientations. Once printed, glue the gun to the top of the turret (which should have the outline for the…
Description A very simple approach to add a holder for painting miniatures to @PhilQc's Spherical Parallel Manipulator that I whipped up this evening. I'd seen it come up this week, and test printed it. A few people in comments elsewhere…
Description Created a set of ‘fins’ and baseplate with clamps to hold desiccant at the bottom of cereal box dryboxes. The idea is to have it lifted up to get close to the spool with separation between them to allow for better airflow.…
Overview Here is a set of different adapters for different types of spools, and the FreeCAD source to create them. A bit rough on the FreeCAD side, but it gets things done (mostly). (On other than Linux systems you might have to update…
Overview A simple holder to mount a hygrometer in my cereal container dryboxes. It can be used with boxes feeding filament upwards or downwards. Printing It should print simply in the orientation presented, and work well with tuned tree…
Update: hanging plate blanks added. A simple version of the GOEWS tile in FreeCAD so that people who use FreeCAD instead of Fusion360 can participate and use it. Includes files for a single or tiled hexes, and also for hanging plate…
v0.9 FYI Parametric FreeCAD source pending… I need to get the support files cleaned up and published then I can publish the source file for this one. Description A basic hobby paint rack system somewhat inspired by the Ultracryl Paint…
Created a holder to keep my pick sets organized (and not stabbing me from my toolbox). Fairly common to have on hand for cleaning up 3d prints. The curved shape matches that of the Husky brand pick set and holds them in place well. The…
Overview These are a set of simple lids for cereal-box dryboxes that are designed to be minimal prints and take either PC4-M6 or PC4-M10 fittings for PTFE tubing to carry filament. The versions designed to use PC4-M6 fittings have a…
Updated Jan 29, 2025. Overview I needed to attach a small sample swatch to my dryboxes to help keep them organized, and the existing ones didn't quite fit the bill. These are quick to print and the supplied clip can stick it on the sides…
Description This is a 'simple' (for assembly and use, at least) winder for embroider floss with a 4.421 : 1 ratio. That means that one crank of the handle gets you almost four and a half turns of the bobbin winding up your thread or…
I'd picked up an inexpensive full face respirator to replace my half face one. The only problem is that I need to wear reading glasses, and you can't really wear standard glasses with such a mask. Looking at what's generally available I…
Description Now that I have a multi-color kit installed on my printer, I needed an auto-rewinder for my cereal container dryboxes in order to be able to keep my filament protected while printing and still reduce tangles on unloading.…
Description I'd seen some people express a concern that the top row of a GOEWS grid was not anchored at the top and would start to pull away under load. I realized that a very simple solution would be to create a grub screw that had the…
Overview A set of different sized grip bases with magnets that can be used to allow alligator clip painting sticks to hold miniatures better for painting. The pre-made versions are sized for 6x2mm round magnets, which should also allow…
(last updated September 10, 2026) Upcoming Nov 1, 2026: Update to handle that breaks it into separate pieces for easier mix-n-match, including a thinner top neck is finishing testing. Also added a link to the now-published larger vise…
Overview This is a collection of connectors to hook items from the Underware cable organizing system to GOEWS boards. This first set is for the larger Multiconnect based items. (these versions were done from scratch, and actually from…
A tool I created to be able to measure the various magnets I'm starting to incorporate in my prints. Some are N52, while others of the same size are probably N48 so I wanted to be able to figure out the difference, and also to decide…
Description A fairly configurable parametric yarn bobbin/spool model to address many of your storage needs. Just print two end caps and a center shaft, screw them together and off you go. Two main variants have been made: one with an…
Overview A simple plate to hold reference bolts and nuts. Since I find these to be less expensive than actual taps and dies (at least for the more common sizes), I like to use a metal bolt for cleaning up printed nuts and a metal nut for…
Introduction Here is a collapsing pen cup/caddy that I made to help my wife carry her fountain pens back and forth commuting to university. There are versions to hold 4, 5 or 6 pens (the first two are about the same overall size). Making…
Overview If you give a mouse developer a cookie set of WH bases... Having picked up a few official GW bases to test my HexiVault Warhammer adapters with (I never trust a print I've not been able to hold in my own hands) the problem of…
Overview A simple clip to hold mini swatches at the top of cereal box dryboxes. These fit against the outside of the container, and should not extend beyond the top clips so don't take up extra space. They are fairly small and take about…
Description This is a simple tool that is essentially a mini clamp/vise to press PTFE fittings on couplers open so that it is easier to remove tubing. Sometimes it can get quite difficult to remove PTFE tubing from couplers, as you have…
Updated July 4, 2026 Description After publishing my floss bobbin winder one of the first questions I got was if I knew of anything to hold the embroidery floss while it was being wound onto bobbins. I pointed the person to some yarn…
Overview This is an adapter for using larger spools/bobbins with my embroider floss winder. The planetary gear system gives enough torque to handle a bit more, and this allows larger spools/bobbins to handle them. Print out, attach to the…
Description A set of adapters that fit the standard Warhammer miniature bases for use with my HexiVault protective cases. I don't play Warhammer myself, but since there is a Games Workshop store in the same center as the grocery store I…
Overview I came across a request from someone asking for an tool to help with opening locking pins back, as their physical issues made that difficult. After getting ahold of some of the type of locking backs I saw that their removal was…
To wszystkie aktualnie dostępne wyniki.
