Liczymy pasujące modele…
Replacement follower for Magpul Gen M3 Pmag in .223 Remington / 5.56 NATO. Modeled in Blender, I included the .blend file. If you are looking for the baseplate, @mocobaco has one at https://www.thingiverse.com/thing:2646840 Category:…
meme award "Your did it" Category: Art
Copy of the original OPSol adapter for Mossberg shotguns. Adapter allows use of 12ga 1.75″ Birdshot, Buckshot, and Slug Shells Only fits: 12ga Mossberg® 500, 500A, 590, 590A1, and Maverick® 88 models, and the 12ga Shockwave Firearm Should…
Added the Lego logo Category: Sculptures
This is my design for paddle cutouts on the Harlot. Somebody already made similar using Cabfare paddles, but I felt this needed improvement. The frames I print at 6 Bottom Layers, 40% infill, 4 Top Layers, and 6 walls all at 0.2mm layer…
Seatbelt cheater designed for a 2010 Ford Focus. For all legal purposes, or whatever, I'm not your mom. Category: Vehicles
Replacement knobs for Motorola 2-way radio. Modeled after XPR 6350 but will likely fit multiple models. Blender file included. Category: Replacement Parts
Replacement follower for Magpul Gen M3 PMAG in .6.5 Grendel. Modeled in Blender, I included the .blend file. Category: Replacement Parts
I remixed by bringing out the face and recessing/beveling the button holes Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: .16 Infill: 100% How I Designed This Category: Automotive
Shellholder holder for reloading. Holds 5, 7, or 9 shellholders and screws to a wall or bench. I have included the Blender file. Category: Tool Holders & Boxes
In this publishing I have included stls for 2 designs for the Carburetor adjustment tool. I used a Ryobi R09050 blower for testing and fabrication. I also included the blend file that I created the peices so you can modify in any way you…
3D printable version of "That Purple Thang" Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: .16 Infill: 100 Filament: 3D Fuel Pro PLA PLA+ Notes: I had the best results printing with the short…
Convert your Gen 3 PMAG into a 458 SOCOM* mag Replacement follower for Magpul Gen M3 Pmag in 458SOCOM. Modeled in Blender, I included the .blend file. PLEASE NOTE: *This follower will only support cartridge overall length of 2.120 inches.…
Had some small gaps to fill after some renovation so I modeled my trim boards, rather than trying to find new ones to match and buying way more than I needed. I added a 40mm stl, and a 200mm that you can just stretch on the Y axis to your…
458 Socom Follower for Magpul Gen M3 PMAG. REQUIRES MAGAZINE MODIFICATION -SEE PHOTOS. This follower is designed to retain the anti-rock nature of the PMAG while allowing for full length 458 SOCOM cartridges. The internal rib inside the…
Honda Push Rivet 6MM these are push-to-release rivets with captured pin Modeled for Honda Dax Battery shroud Honda Part number 90116-K0A-E11 Suggest printing the rivet outer part in 90° orientation for best strength as shown in…
It's a dip holder, you can get the metal clip by searching "visor clip" on Amazon 12/10/25 added dipholderv2.stl with an integrated removable support for the clip channel Category: Tools
I modeled the baseplate so I could use a jig setup by screwing a 1x3 board and route a radius. There are 2 stls, a stock baseplate, and a modified baseplate. I also include the Blend file if you want to modify further. Category: Machine…
Made these to replace hinges for a friend of mine that uses his baby gate outdoors. The top hinge has a drain hole so it doesn't collect moisture. Category: Replacement Parts
9, 15, 22.5, 30, 45 & 90 degree angle adapter able to mount to 4" Circular electrical work boxes for cameras, floodlights, etc. There is a flange part, and an adapter part. Category: Household
I shortened the original 3rdpig design by 3mm and changed the threading to 1/4-20, because 'MERICA! and 1/4-20 bolts are a lot more common here in the states than M6. Cases cut without turning the setscrew in came out at 1.386", and after…
It's a seat belt cheater for 2007-13 GM trucks. Use at your own risk, but be free to choose. Category: Hand Tools
Holder for Dillon 550 Caliber Conversion kits. Holds 4 caliber conversion kits & can be mounted to wall, or just set on benchtop. Included a file with DP logo, and one without. Shown printed in Polymaker PA612-CF Category: Tool Holders &…
A mushroom-style momentary push button for Start/Stop/E-stop applications. 10-24 thread, 2-3/8" overall diameter. Blender file included. Category: Replacement Parts
Honda Grom washers, modeled after the factory washers. I printed from ASA, face down, so I get the texture from my textured PEI plate on the face. Blender file included. Category: Automotive
Wainscot Cap moulding. Includes Blender file so you can tweak to your needs. Category: Household
Design superceded by Dillon Powder measure knob with clear direction indicator on front, side, and rear. Category: Tools
Reciver hitch cover plug Chevrolet Bowtie Category: Automotive
45ACP Bullet magnet for fridge or whiteboard. Uses 8x3mm magnets. 2 separate stls for case and bullet for easy printing. I printed the case using "middle" slicing tolerance and printed the bullet using "exclusive" slicing tolerance in…
Replacement gasket for the high quality Wavian Jerrycan spouts. This is not the same as the gasket that goes in the jerrycan lid. Part number 2325N. The gasket for the Jerrycan lid is 2325 and can be found here…
Replacement wheel for Kenmore vacuum cleaner. I printed the wheel itself in PLA+, the tensioner out of TPU at 10% infill, this part is inserted into the middle hub. I printed the tire out of TPU 95 with fuzzy skin enabled. Included a…
Floppy Fairing Fixxer for 2022-up Honda Grom MSX125. Braces the fairing after eliminating the stock airbox using the mounting bolts and U-nuts of the old airbox. The left side brace is easy to print, right side brace is a little awkward…
planer knife-setting jig to set the blades Category: Hand Tools
Dillon Powder measure knob with clearer direction indicator on front, side, and rear. I extended the knob out by 7mm to avoid interference with the zip spindle on my Hornady resizing die. Included 3mfs for Orca and Bambu, and a Blend…
Case Mount for Dynojet Powervision III Contains stls for M5 threads in the model, or cutout for heat set inserts Hardware Required: 1x 1/4-20 nut 6x M5 bolts Optional: M5x6x7 Heat set inserts Updated 8/17/26; model is modified for heat…
These are knobs to slip on to the low and high fuel adjustment knobs to Ryobi(and others) Carburetor. I used a Ryobi R09050 blower for testing and fabrication. I also included the blend file that I created the peices so you can modify in…
Yamaha Prebug Zuma Headlight Mount for Rough Country 6" LED lightbar. Design includes a grommet that I printed out of TPU for the power wires. Blender file included for easy modification.…
Woodford Model 17 Sillcock handle. Included the .blend file. Category: Replacement Parts
I threaded the holes for the ball spring plungers(M4x0.7) so no need to tap them, also made the hole wider to accomodate the screw head for the M3x20 screw. I have included the blender file, and an stl. Print Settings Printer Brand:…
Grip panels for Dickson Detective 25ACP pistol. Might also fit Galesi model 6 but not entirely sure. I included the blend file so they can be customized. Category: Replacement Parts
Bugeye Zuma conversion to 6" LED lightbar. Will require a bracket behind it be cut or hammered to fit. Modeled for 6" Nilight LED lightbar from Amazon(link below). Included Blend file for headlight bezel as well as a bracket that fits…
Replacement gear for C4 Corvette electric seat transmission. Old gear will need to be removed, I used a torch and scraped the old gear off the shaft, replaced with this new gear, printed from Polymaker PA612-CF Nylon and used JB Weld on…
I made this for my own use case. When setting up my Dillon powder measure, I use cases with spent primers installed backwards to dial in the powder weight. This file is a holder for these pieces of brass that I reload for on the Dillon.…
A vented engine cover for Yamaha Zuma (prebug 1989-2001) Made in Blender, blend file included. Category: Automotive
Nozzle holder for Wavian Jerry cans. Can be screwed in with wood screws and use the 'nut' to protect from sharp screw bottoms, or pop rivet in place. Print with a semi flexible filament that is not brittle, PLA+ should do fine, or even…
Wall mount for CatchCover Quick Disk system. Use for Rattle Reels, Fishing Rods, Cup holder, etc. Category: Gadgets
Cup holder for Yamaha Prebug Zuma. Uses factory mounting holes on backside of fairing. Blender file included. You will need longer bolts. Category: Automotive
Clamlock Wall Mount & Base Plate for your fish house. 2 different base plate models included, one for 10-24 machine screw heatset inserts, and one for using 10-24 nuts. Category: Gadgets
7/16" x 3" Colonial style baseboard moulding. Contains a blender file, so you can modify the length, or modify to match your use case. Modeled from…
Replacement cover for Lambro 289 dryer vent https://www.amazon.com/gp/product/B005EGQTU0/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1 Category: Replacement Parts
Factory seating stem was leaving a ring from the interface between bullet and seating stem, so I modeled this seating stem with the profile of the X-treme bullet for the Hornady Seating Die. I printed at .12 layer height, 95% infill, and…
Trail Tech Vapor Digital Gauge Mount for Yamaha Zuma (prebug 1989-2001). Blender file included. Category: Automotive
Caps for Honda Grom blinker holes when removing blinkers, should fit all years. Blend file included for customization. Category: Other
Who needs seat time when you can just install a wheelie button on your Grom?! M10x1.25 threads meant to thread into the mirror mount on the front brake perch. Included stl for left-handed threads for installing on the clutch side if your…
Glow Cup for charging Glow-in-the-Dark Ice Fishing jigs. will need a 1/2" x 3/4" switch and LED Strip. Contains a flat bottom, and a ramped bottom to help with picking out the jig. Category: Gadgets
Colonial Style Door Case Moulding 11/16" x 2-1/2" Contains a blender file, so you can modify the length, or modify to match your use case. Modeled from…
It's a DERO Coin Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: .12 Filament: 3D Fuel Pro PLA PLA+ Notes: Suggest printing upright, with a raft so you get the details on the coin face. I ran a…
Replacement parts for Gibralter or Architectual Mailbox brand mailboxes. Category: Replacement Parts
Wall mount base for Audiocodes C455HD Microsoft Teams phone Category: Office
Bar clamp for mounting handbrake reservoir, or whatever else you want. Uses 1/4-20 bolts and a 2mm roll pin Category: Automotive
Colonial Style Door Case Moulding 11/16" x 2-1/4" Contains a blender file, so you can modify the length, or modify to match your use case. Modeled from…
ET Wheels Center Cap. Recommend Nylon like Polymaker PA6-CF. Best cosmetic results if printed hollow side down with a brim and tree supports. I printed the cap itself with a 0.4mm nozzle at 0.2mm layer height. I printed the logos with a…
Bar clamp for mounting handbrake reservoir, or whatever else you want. Uses 1/4-20 bolts and a 2mm roll pin(or a piece of filament). Category: Automotive
Replacement ECM Bracket for C5 Corvette. Recommend Polymaker Fiberon PA612-CF15 filament. Category: Automotive
I designed this to work with my handlebar clamp here: https://www.thingiverse.com/thing:6758378 or https://www.thingiverse.com/thing:6758382 recommend printing in the orientation in the photo above, to prevent the tabs from breaking at…
Speedo/Tach mount modeled for 2004-06 Yamaha FZ6, Model requires 4x 1/4-20x2" (short riser) or 1/4-20x2.5" (tall riser) bolts, 4x 1/4-20 nuts, and factory hardware to mount speedo/tach into the mount. Includes 2 sizes of risers and is…
Clone of UNI Airvent UFV-6 Category: Automotive
4 color keychain for Honda Dax. Blend file included. Category: Other
Yamaha Zuma (prebug 1989-2001) Ignition Bezel. I would suggest printing in the orientation shown in the last photo, to increase strength. Category: Automotive
trim .308 Winchester or 6.5 Creedmoor for resizing to 8.6 Blackout Suggest printing in orientation shown for best results Blender file included Category: Hand Tools
Replacement cap for AR3000-A2 / AR3000-A2G Dixon branded or Annovi Reverberi branded inline pressure washer water filter. Will likely fit cheap Amazon clones as well. Blend file included.…
Shower knobs that fit Kohler(and likely other) brand 16-point shower cartridges. Included the .blend file. I used Testors model paint to fill in the fire and snowflake impressions. Included stls for printing inserts as well. Edited…
Fuel Injector retaining clips designed for 1989 Chevy Corvette but will likely fit other year/make/model. Included blend file as well as stl. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2…
Replacement bolt cap Honda Part 80126-K26-G00 Blender file included for customization Category: Automotive
Yamaha Bugeye Zuma conversion to 6" LED lightbar. May need to use zipties for the bottom mount as there is limited clearance to use factory hardware. Modeled for 6" Rough Country LED Light bar. Included Blend file for headlight bezel. I…
4 color keychain for Honda Navi. Blend file included. Category: Other
Stage6 Digital Gauge Mount for Yamaha Zuma (prebug 1989-2001). Blender file included. Category: Automotive
Cup holder for my lawn chairs with 26mm tubing Category: Outdoor & Garden
Remix of my glowcup https://www.printables.com/model/1121686-glow-cup-for-ice-fishing . Fits into Catch Cover Quick Disk and is rotatable with detents for 8 positions. Cup mounts to the bracket with a 6mm or 1/4" bolt and nut. You will…
I created this for a gumball machin restoration so I can set on a table and move around without chipping paint or scratching table. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 40…
I'd be surprised if anyone else needs this specific part, but if you do, here it is. The bezel on my slow cooker got brittle and broke off, so I modeled a new one in Blender. Blender file is included. Print Settings Printer Brand:…
Replacement Belt for Li'l Playmates Airport toy. Both belts are the same size. Print with TPU. I used Hatchbox TPU 95A. Blender file included. Category: Toy & Game Accessories
Replacement Battery band for 2002-2013 Kawasaki Part number 92072-1406 Category: Automotive
knob on stirrer broke so I modeled a new one in blender. I printed 2 tone by pausing at layer 56 and swapping filament Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: .2 Infill: 50 Filament: 3D…
7/16" x 3-1/4" Colonial style baseboard moulding. Category: Replacement Parts
I needed lower gaskets for my Oak Acorn Gumball Machines Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: .2 Infill: 15% Filament: Hatchbox TPU TPU Black Category: Other
Replacement Front Fender Cap for 2002-2005 Kawasaki Prairie 650/700 Kawasaki Part No 11065-1204-6L (Red) 11065-1204-6A (Green)
Keep your fob handy for opening gates from your vehicle. Requires 2x 8x3mm magnets, and a visor clip, available from Amazon. There are 2 versions of the holder, one for HID branded fobs, and another for the generic ones I got from Amazon.…
To wszystkie aktualnie dostępne wyniki.
