Liczymy pasujące modele…
This is a remix of master chief John 117. It was printed with the following configuration: layer heith :0.2 support: Yes. Raft: No Filament: PLA + Filament Brand: GST. Nozzel temp : 205cº Bed temp: 60cº infill: 18% (variable in two steps)…
This is a remix, but is not in printables, its in https://www.thingiverse.com/thing:1722395 Connector were added to connect the wings, and the head was modified to have a more easy entry. Made on an Artillery Hornet. Layerhight 0.2 and…
I've remixed this nice model to convert it into a nice planter inspired in the chids tale “Manuelita” It was printed on a Artillery Hornet. with prusa slicer 2.5. (using prusa profile Hornet 0.16) Flament : PLA 3n3. Tempreatures : nozzle…
I've remixed this nice model to convert it into a nice planter inspired in the chids tale “Manuelita” (He's Turtlue Kid) It was printed on a Artillery Hornet. with prusa slicer 2.5. (using prusa profile Hornet 0.20) Flament : PLA 3n3.…
I've remixed this nice model to convert it into a nice planter inspired in the chids tale “Manuelita” (He's Bartolito) It was printed on a Artillery Hornet. with prusa slicer 2.5. (using prusa profile Hornet 0.16) Flament : PLA 3n3.…
Hi all I've redesign this fabulous model created by Hildi3D ( @Hildi3D_1497460 ) Here is the original design I turn into a piggy bank to my kid, So I've scale up, and cut in two half. I've added a kind of border to make an easy up an…
I've found this amazing model in https://cults3d.com/en/3d-model/home/louis-vuitton-nano-bag-for-flowers and designed by Grafit. As I've said its an amazing job. I've made some modifications to put some suculet plants on it. Ive…
Hello, I redesigned this incense holder since the original (which by the way is an excellent work by Deun's Factory) has a problem with the wind. With some wind the samurai usually falls. So I added this base to make it more stable.…
Hi, this is just a remix of the magnificent work done by the original creator. I've just add some holes on the bottom of the pot to drain the excess of water (when the pot is in the exterior) I've printed in 0.28 layer Hight. No supports…
Hi, this is a remix about this awesome work from Natalia V. I've rescaled it to be small enought to fit in a pencil. then I've made the hole to insert the pencil. My kid loves it and uses it on his pencils . I've printed on a Bambulab A1…
Hi, this is a remix about this awesome work that I was found in thinguiverse: https://www.thingiverse.com/thing:4649260 from samuel_whitby. I've rescaled it to be small enought to fit in a pencil. then I've made the hole to insert the…
Hi, mi kid want to have a special school start this year so he ask me if I can make some pencil topper for him and his friends. So I decided to make a series of characters from models that can be remixed. This is a Kuromi's head. I've…
I took this excellent model and remix the hinges (bigger with a plug to make it mobile). I've change the interior covers (to participate in a printing challenge), in one side I added a Sun clock, and in the other side a message Witten…
Hi, this is a remix about this awesome work from Rudolph (https://www.crealitycloud.com/user-profile/3016066149), I founded here in creality store. I've rescaled it to be small enought to fit in a pencil. then I've made the hole to insert…
This project start from a necesity of my wife. She is a teacher, she has a little student that cant see. So she need to different object to feel. So I found this file, https://www.printables.com/es/model/514261-coconut-shell Thanks to…
This is Remake of https://www.thingiverse.com/thing:4158561 (Thanks Cesar from Cotrol 3D). This are hangers to the bridge in Z, just put the hanges in the bridge and get with the one that has the hotend. when the axis in in the hanges…
This is a remix based on the original design of Alex Hatch at https://www.thingiverse.com/thing:557527 and the remix made by Jason Cross at https://www.thingiverse.com/thing:2254250 I found this awesome model and make it as a key-chain to…
This is a remix based on the original design of Daniel Gleiberman at https://www.thingiverse.com/thing:1625194 I found this awesome model and make it as a key-chain to give as a present. It was printed in an artillery Hornet. with nozzle…
HI, This is a remix, the original model is in https://www.thingiverse.com/thing:4611466 by WaikikiProd. I just scale it, (The read one is 100% and the green one is up to 120%).The make it hollow, add a hole to drain the excess of water…
Encontre este modelo en tingiverse pero no lo he vuelto a encotrar para ponerlo como referencia. Lo modifique y agregue el hueco para las llaves. I found this model from thingiverse, but I cant found again to reference it. I've modified…
Hi, this is a remix of an excellent model published by FairLightX8 (@FairLightX8_303902 ) you can download the original model in https://www.printables.com/es/model/685115-piston-cup. I've added a compartment in the piston head. the model…
Hi, mi kid want to have a special school start this year so he ask me if I can make some pencil topper for him and his friends. So I decided to make a series of characters from models that can be remixed. This is a Tuxedo Sam . I've scale…
Volvano mosquito repeller, special to spend summer afternoons in the garden without mosquitos. The base was redesigned to have a bolt to pin the mosquito repeller. The volvano was rescaled to fit the spiral in the interior. Printed in…
Bandera Argentina, se puede utilizar como escarapela o imán. Impreso en PLA marca 3n3 Altura de capa 0.3 Nozzel :0.4 Temp Nozzel: 205 Cama: 60 Tiempo 40min Cambios de filamento capa 26 y 30 Soportes :no Balsa: no Impresora: Artillery…
Hi all, In this opportunity I've remix a pokemon, gitlett to be more precise. I've chop it a little and make a hole to place a nice suculent plant inside. Thanks to https://www.printables.com/es/model/68566-diglett-pokemon for the awesome…
I've founded this model in https://www.thingiverse.com/thing:4899818 and is only there. I believe that is a great job and deserve to be shared with all fans of 80's cartoon and so has to be here. Enjoy it and and Thanks to Michael Soucy…
This spoiler was designed to cutomize (and repair) my old Renault maxi megane. Printed in an Artillery Hornet. Filament 3n3 black. nozzle:04 Layer higth 0.2, walls 3, top 3. temperatures: nozzle 205ºc bed 60ºc Supports: Yes, Brim: no…
Hi, I found this Teddy Bear in here in : https://www.crealitycloud.com/model-detail/6256494c3d50a4fff1f6af99?source=5&isFree=false its an amazing work From 3D Park. I Just cut and add a planter pot to improve my garden. I've printed…
Este es la primera version para un soporte especialmente diseñado para el Fiat nuevo Palio (2010 - 2016). Son cuatro partes, dos soportes y dos pies de apollo. Fue impreso en una Artillery Hornet. Filamento : 3Nmax PLA+ nozzel: 0,4 Capa…
This is a remix based on the original design of Alex Hatch at https://www.thingiverse.com/thing:557527 and the remix made by Jason Cross at https://www.thingiverse.com/thing:2254250 I found this awesome model and make it as a key-chain to…
I've founded this model in https://www.thingiverse.com/thing:4899822 and is only there. I believe that is a great job and deserve to be shared with all fans of 80's cartoon and so has to be here. Enjoy it and and Thanks to Michael Soucy…
Encontré este magnifico diseño de llantas le agregue la cubierta,y un cuello a las ruedas delanteras para poder conectarlas con el eje de dirección delantera de un viejo (Y muy deteriorado y en vias de restauración) Renault Maxi Megan.…
Este es un remix de una escultura de un cachorro. Puede ser utilizado para guardar anilllos collares y demas piezas pequeñas. Parametros de impresion: Impresora: Artillery Hornet. Filamento: PLA marca 3N3 Nozzel:0.4 Altura de Capa: 0.2…
This is a remix of Tree stump knife holder. I printed in an artillery hortnet in PLA 3n3 Layer hight 0.3. nozzele 0.4. Temperatures : nozzle 205ºC and Bed 60ºc Support only in the frot where is the gnome. the rest yu have to use support…
This remix was based on the design of Waikikiprod He made an excelet work. So I used this incredible Toad and adapt to my gardens tap. This is a very simple, economic, and common, pastic tap. I've designer the inset of the tap in Fusion…
Una Piedra rompió la parrilla de mi auto, y como el cambio no es una tarea facil diseñe este Logo de IAVA que va exactamente sobre la parrilla para que la rotura no se note. Se imprimio en : Filamento : PLA+ 3nMax Color:Gris Plomo. Altura…
Lenovo 530s stands Was designed to this particular model but can fit in other model of laptops (I've tested in a Dell Latitud 7700 and in Asus X510). The Gap between the hook and the circle is 12mm Hight is 45 mm. This was printed:…
This is an amplifier box that has multiple covers. * Piggy bank. * Planter / Pot. * Pen Holder. * Just a box to store thigs. * The base can be use as a phone holder, (try to play music in it, this could be a surprise). It was printed in a…
🇪🇸 Español 🎮 Para el cumpleaños número 18 de mi hijo elegimos una temática gamer. Como parte de la decoración diseñé una colección de porta servilletas con forma de controles retro. En esta ocasión el modelo está inspirado en el control…
Hi, I needed a end or a terminal for a rope, so I've designed it on Fusuion 360. In someway is very similar at this things that are use un the hoodie. And you can use in the same way, pass the terminal by the rope and then make a knot (or…
Hi, I've designed this incense holder / support / burner to remember me that when I'm stressed with worries, overwhelm by different kinds of presses, (as reach to the next moths without spend my savings, or manage to deliver some piece o…
Bandera Argeninta Fiat nuevo Fiat Palio (2010 - 2016). Impresa en PLA, para la parrilla de panal de abejas, debe ser lijada un poco para que entre correctamete. Fue impreso en una Artillery Hornet. Filamento : 3Nmax PLA nozzel: 0,4 Capa…
Arandela de seguridad generica, sin un fin especifico, en mi caso las use para sujetar una manija de alzacristales. Impresora : Artillery Hornet Material : PLA+ marca: 3N3 Altura de Capa: 0.2 . Nozzel: 0.4 Temperaturas: Nozzel 205ºC ,…
Hi, I have an old Yamaha banshee four trax (Model), but after of many years an some kids the banshee lost some parts. Here is were 3d printing saves the old toy. And I've started designing a fuel tank replacement to complete the shape of…
Reemplazo de botón Ok de goma de control remoto noblex Realizado en PLA - 3N3 Altura de capa 0.2 Temp nozzel : 205 Cama 60 soportes : Si , Borde No, Balsa: no Impresora Artillery Hornet. Tiempo 10min, filamento utilizado 1g English…
Arandela de seguridad generica, sin un fin especifico, en mi caso las use para sujetar una manija de alzacristales, es el mejor modelo hasta ahora. Impresora : Artillery Hornet Material : PLA+ marca: 3N3 Altura de Capa: 0.2 . Nozzel: 0.4…
This, is Ham a caracter from a child book called Kukitos to work with childs emotions. My little child read this book at school. So I decided to designed it based on the book, to my child and his friends. The gcode file contains two…
This sign was created to help a little kid who can see to find his classroom in first grade of primary / Elementary school. It has 1C witten in braile. Was designer in vectary.(Free web application). Printed in an artillery hornet.…
🇪🇸 Español 🔧 Herramienta simple pero clave para mis impresoras 3D: diseñé este cortador de tubos de teflón con dos medidas específicas 🎯 Dos de mis tres máquinas usan teflón en el barrel, y cortarlo justo a medida siempre fue un desafío.…
Arandela de seguridad generica, sin un fin especifico. Impresora : Artillery Hornet Material : PLA+ marca: 3N3 Altura de Capa: 0.2 . Nozzel: 0.4 Temperaturas: Nozzel 205ºC , Cama 60ºC Soportes: No, Balza: No, Borde No. English: Generic…
This is a fictional character created to the Makerton2022. It was full created in thinkerCad. Printer: Artillery Hornet Filament: PLA 3n3 Bronze. Nozzle: 0.4 Temperature: Nozzle 205ºC, Bed: 60ºC Layer Height: 0.2 Supports: Yes, Brim: No,…
Hi all, today I saw in the news a piece of a notice that the doctors, nurses, people from administration, maintenace. In dead, all the people who works at Garraham Hospital on a strike because the goverment do not pay enought to pay the…
Arandela de seguridad generica, sin un fin especifico Impresora : Artillery Hornet Material : PLA+ marca: 3N3 Altura de Capa: 0.2 . Nozzel: 0.4 Temperaturas: Nozzel 205ºC , Cama 60ºC Soportes: No, Balza: No, Borde No. English: Generic…
Bonko is a character from a childs book. I design it for my kid. I've made two models, one is a figure, and the other can be insert in the pencil tip . The character was printed in PLA brand GST in an Artillery Hornet. Layer hight 0.2…
🇪🇸 Español 🎮 Para el cumple número 18 de mi hijo, elegimos una temática gamer. Como parte de la deco, diseñé estos servilleteros con forma de controles retro. Este modelo está inspirado en el clásico control de Super Nintendo 💜 🧩 El…
To wszystkie aktualnie dostępne wyniki.
