Liczymy pasujące modele…
This is a 3D scan of a gargoyle statue from polycam that has been cleaned up with meshmixer. Print it as a decoration or as a gargoyle game token. Print with supports and note that only the stl model has been processed in meshmixer and…
Print for decoration or to practice tying knots. Please use common sense and your best judgment if you want to use this with actual boats it might hold a kayak or a rowboat but probably not a big motor boat or sailboat. And many filaments…
An easy to print egg model and a Voronoi version of the same model. For printing the Voronoi model slightly lower the Z axis offset in your slicer to provide a better attachment to the print bed, and print with 100% infill for strength.…
Use OpenSCAD to edit these files to create your own custom text to make fridge magnets. Follow the directions in the OpenSCAD editor to make your own custom text. To make fridge magnets attach a magnet to the back of the print - flat stip…
An owl vase designed to be printed in vase mode. A 3D scan of an old owl piggy bank older that has been adapted for vase mode printing in fusion 360. Pictured print was done in vase mode with TPU flex filament with the generic flex…
A dart glider I made for the make it fly competition - use with caution don’t + throw it at people Designed to be flexible enough to absorb impacts when printed with PLA so it can be used more than once Unfortunately doesn't fly very well…
An improved version of one of my older egg designs with a better first layer and with a Voronoi pattern from voronator.com. For better printing results with the Voronoi eggs I recommend printing the version with an attached base or moving…
A frog penholder, put pens or other things in the frogs mouth! A 3D scan of a frog pen holder that has been processed and cleaned in fusion 360. and up to 100% infill or put heavy things inside the frog’s mouth for greater stability and…
A card with a spinning section printed in place. You can spin it around in your hand on on the end of a pen or pencil. This is a modification of a business card I made awhile ago with the car information removed, feel free to add your…
A remake of one of my older designs produced in Prusaslicer and with a Voronoi pattern from voronator.com. For better printing results with the Voronoi version of the bowl I recommend printing the version with an attached base or moving…
A guy with books bookended, this started as a scan of a real bookend which has been edited for easier 3d printing and use. You might be able to get away with printing this without supports if you have a nice printer but I recommend…
Print out amazing looking infill based decorations or ornaments with (almost) any design! Made entirely inside of Prusaslicer. Designed for the 2023 Holiday Decorations and Necklaces and Pendants contests To print one of these simply load…
This Big Soap Dish with a Voronoi Pattern has a Benchy sailing on it. Made for the soap dish competition. Note the Benchy on the model is fairly small and parts of it like the chimney are even smaller so printers may have some difficulty…
Use 1 or 2 of these mini chopstick holders to keep you chopsticks clean! Comes in a left handed and right handed variety, feel free to mix and match! I'm working on doing renders and taking nicer photos of my prints but it's still a work…
Why mess with with a good thing? - This mini egg works great as a toothpick holder and as a small decoration. It weighs ~5g with 100% infill. Have fun!
A Voronoi owl from a 3D scan including a version with a base for a better first layer. Voronoi pattern produced from voronator.com. For better printing results with the Voronoi Owls I recommend printing the version with an attached base…
A mashup of Jonas Daehnert's (@PhoneDesigner) excellent flat whistle design and CreativeTools's 3DBenchy made for the Benchy Remix contest in 2025. Print as you would any other Benchy though if you are having issues with the whistle refer…
Visualizer your printer motors moving with this cute hamster running in a wheel. To attach glue a small magnet to the center of the hamsters wheel - I recommend using a hot glue gun as it can be easily attached and removed. Flip the print…
A two part wallet and a two part magic deck holder made for the Wallets flash contest. Ideally print in TPU for flexibility and strength. Video with the satisfying noises this print makes - Video about how I made it and my decisions…
Credit to printfutura @printfutura_36661 https://www.printables.com/model/11351-plantygon-modular-geometric-stacking-planter-for-s Several years ago I tried redesigning printfutura's Plantygon since I liked the design and was curious…
The fixed version has been repaired with Prusaslicer's built in Netfabb repair process and is my recommendation for printing. This doorstop is fairly thin so it may be worth scaling up or stretching along the z axis depending on your…
This is a 3D printing project I did in order to make it easier to explain solids of revolution in math classes and to allow other people to create their own solids of revolution more easily. Print them out and pass them around in order…
Pictured printed hearts were scaled down to 50% and printed in translucent pink filament with hexagonal infill. These aren't very original - I just wanted to do something \_(ツ)_/
Table legs for filament spools - print some and clip them on to get a table! Made for the print tables competition. It's best to print at least 3 for table stability, though 4 works better for empty spools. Because of their curves they…
"It's not a bug, it a feature" While trying to design a phone stand I accidently made a phone stand that won't hold you phone. It's spiral shape and curves allow it to twist and slide out from under your phone. This was designed for for…
A five head totem tower of "3D Printing Nerd "Make Me a Super Hero" by printplateau" - remix for the competition. Use as a paperweight or as a decoration. Made with meshmixer. Beware, due to an issue with how meshmixer processed the totem…
A few different egg pen holders to try and enjoy! Print with up to 100% infill to stabilize pen holders and/or add weights to the model. With the small egg pen holder small hex holes make sure it is at least 70mm tall with the the other…
Just the head of "3D Printing Nerd "Make Me a Super Hero" by printplateau" - remix for the competition. Use as a paperweight or as a decoration. Made with meshmixer. Print with supports for the leaves on the head. Attribution matches the…
note: printing of parts and a small file rework are still in progress will add the files and have new pictures ASAP but needed to post to make sure I made it into the competition Inspired by Randall Monroe’s XKCD about Mars Rovers I set…
To wszystkie aktualnie dostępne wyniki.
