Liczymy pasujące modele…
Remix of my other stand that had the logo extruding from the front. This one was made with Hatchbox wood PLA. I really love this stuff. I took the PS Vita Stand by LordLeXaT and cleaned up the front and added a different PS Vita logo,…
Remix of Harry Potter House Badges by Anubis_ Scaled and slimmed down the objects for my printer, made the Gryffindore badge match the others better and made a frame to snap them in to for a nice border. It required a very firm press to…
I set out to make a dispenser that would print fairly quickly and require no supports. I had to re-think a lot of the components to accomplish this, but am happy with the result. It's threaded to match a standard Mason (Ball) jar used for…
I took the PS Vita Stand by LordLeXaT and cleaned up the front and added a different PS Vita logo, then cut out a 2-stage channel down the center and added a channel to run the cord. The bottom half of the hole is large enough for the USB…
I used Nuka Cola Clock by techoutreach for the cap shape but scaled it down and made the hollow in the back conical so its heavier. It'll still accommodate a clock mechanism 65x65x20 or smaller, but there's no hole in the back for…
I took the Cat Stand by Itzafezookie and shrunk it down to approx 60x60x7mm and extended the length of the tail to hold my iPhone 8 in its case and fit beneath the edge of my computer. The opening is 15.5mm so it should hold many…
Three 200mm x 84mm trays with various compartments. Made in Tinkercad. Print Settings Printer Brand: FlashForge Printer: Creator Pro Category: Bathroom
This is a Victory Motorcycles Logo Sign for my garage. It is printed in: Black to 1.1mm Blue to 2.1mm Silver to 3.1mm Orange to 4.1mm Red to END Print Settings Printer Brand: FlashForge Printer: Creator Pro Category: Signs & Logos
This is a simple stand to fit Ocarina - fully playable by seggybop and Ocarina of Time by hockenmaier. Print Settings Printer Brand: FlashForge Printer: Creator Pro Infill: 20% Category: Music
Resized Fire Extinguisher or Gas Torch Holder by The_BeardBot to fit my larger 108mm diameter extinguisher. The screw holes sizes are in tact so the same hardware can be used. I just used some doubled up electrical tape for the strap.…
A simple stand to hold Ring Sizer rings by mctrivia. Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: No Infill: 15 Category: Rings
This is a Buell American Motorcycles pegasus logo sign for my garage. It measures approx 150mm x 150mm and was printed up to 1.64mm in Solutech Black PLA then paused and switched to Priline Silver PLA for the rest. Print Settings Printer…
This bracket will screw in using one of the bolts on the side of the machine. The feet will rest inside of the handle. I've had it installed with heavy use for a few months and its been solid. Print Settings Printer Brand: FlashForge…
I took Apple watch band holder by as2008schl and merged all of the modular bits in to one 5 slotted holder meant to be mounted with double sided tape. The ones on the left are 42mm and the right are 38mm and both fit nicely. These were…
Mixed up the fantastic Yugioh Deck Holster Box by djnicolosi3148 and the Glue gun stand - mini glue gun by Lee-R to make a hot glue gun caddy and added a cable wrap around the rear. The stand is a separate part that slides in to a notch…
This is a simple cartridge holder for Playstation Vita games. I took inspiration from a Pez dispenser for this model. The holder part should be printed vertically. It will only need some supports in the logo etched on the side. The trays…
A simple brick pattern toilet paper tissue dispenser made in tinkercad. It measures 135mm round by about 120mm tall. The container was printed in black Solutech PLA up to 2.75mm, paused then switched to Hatchbox ABS up to 102mm, then back…
Remixed General purpose hook by Erikjuh to hold 2 towels. Printed with my all time favorite material Hatchbox Wood PLA. Thanks the author for sharing the file! Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No…
This is a set of rolling pin spacers to make evenly thick dough for my rolling pin that measures 54.25mm. They fit by pressure very snugly on each end. I printed these using a brim, so it added a slight bit of thickness to the ring that…
A simple weave pattern toilet paper tissue dispenser made in tinkercad. It measures 135mm round by about 120mm tall. Printed with dual extruders in PLA. Pull the cardboard core out of the center to feed paper through the lid. Added files…
This is a Buell American Motorcycles logo sign for my garage. It measures approx 200mm x 100mm and was printed half way in white then paused and switched to blue. Print Settings Printer Brand: FlashForge Printer: Creator Pro Category:…
Remixed Elegant Arch MacBook Pro Stand by dmpmassive. Still using it for a MacBook, but resized the foot print to 175 x 120 x 70mm to fit my glass bed nicely. The gap in the center is 24mm wide so it should fit other model computers as…
Mixed up the fantastic Yugioh Deck Holster Box by djnicolosi3148 and the Glue gun stand - mini glue gun by Lee-R to make a hot glue gun caddy and added a cable wrap around the rear. The stand is a separate part that slides in to a notch…
Mixed up the fantastic Yugioh Deck Holster Box by djnicolosi3148 and the Soldering Iron Stand by NorthernLayers to make a soldering iron caddy and added a cable wrap around the rear. Printed with PLA on low quality settings with 20%…
I had a splash of acetone wipe out the FlashForge Creator Pro logo on the front of my machine, so I printed up a replacement. I've also included an inverted version. This one was printed on glass with an ABS slurry. In hindsight, I should…
This is a 3 piece stand for my longboard. The opening is 125mm x 15mm so it should fit many boards with longer tails. The blue part on mine held to the black part with a pressure fit, but glue may be necessary. For the badge, I did a…
This is a knurled pot to fit the Self-Watering Planter by parallelgoods Category: Outdoor & Garden
I took Critter Rescue Ramp by DuaneIndeed and straightened out the straps a bit to fit my pool and then separated the second ramp from the lily pad and resized it to 200 x 145 x 27mm to fit my print bed. If I come back to this I'll…
This is a simple button legend for my Raspberry Pi arcade machine printed with Solutech Black PLA and AIO Robotics Red & Blue PLA. The look was inspired by an Etsy sign by LiztonSignShop. I started with red, switched to black then back to…
I took the Roundcorner measurement tool by blender and removed the smallest 2 levels and changed the numbers from roman to standard. Category: Tools
This is a small 90x90x65mm desk caddy. The shapes will really put your slicers support materials to the test. I’d recommend linear over tree shaped supports, since I had trouble with them snapping off. Print Settings Printer Brand:…
Started with WiFi Cap For QiDi Tech 1 and removed the wifi logo then replaced it with a recessed SD logo. Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: No How I Designed This Remixed using tinkercad.…
I flattened the parts that connect to the barrel and made a handle that will hold a 1/4" hex bolt recessed. There is room in there for a spacer to accommodate different length bolts. I greased the bearings and it spins super slick even…
To wszystkie aktualnie dostępne wyniki.
