Liczymy pasujące modele…
I found the relocator of SPEKERDUDE but not the Y-splitter he used. So I found the Y-splitter of InterlinkKnight and put them together for my Anycubic Kobra S1. You will need three PC4-M10 fittings and two screws M2,5 x 4 mm. If you could…
This is a buffer stop female and male version. Have a lot of fun with it. Print Settings Printer Brand: Anycubic Printer: Predator Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Filemantwerk PLA light ivory Category:…
Hello Everybody, I changed a little bit of Smuk3Ds Rail Crossing. ATTENTION: The gate and the pillar have to show a V when you are pushing it together. My kids are loving their new toy hope that your kids will love it, too. Happy Printing…
I have constructed these attachments for the IKEA freight wagon. Prints the models in 0.2 layer height and does without supports. You will need the following magnets for some of the attachments: Magnets 6x1 mm These additional parts if…
Here are both possibilities in. Have fun. Print Settings Printer Brand: Anycubic Printer: Predator Supports: Yes Resolution: 0.2 Infill: 25% Filament: no information PLA ivory Notes: I have a Anycubic i3 Mega S. No Predator Category:…
One of our kids knocked over the TV and broke the stand on the TV. The stand and the bracket on the TV are broken and can't be repaired either. Good thing that today's TVs have holes and threads for a wall mount. The threads on this TV…
This is a with blender self constructed roundabout. And it works. You can use it with or without the short lines under it. There are four different lines. Just where the murble should comes out. You can use the short lines separately.…
At Formnext 2024, I pointed out this glaring design flaw to the folks at Anycubic. But it’s still there, even on the Kobra 3 V2. If you don’t replace the holder, the orange cable will break. You need a PC4-M10 fitting for the external…
This is a stackable bridge for our Ikea wooden train. I have revised it because the height of Ikea is 65 mm. First of all I did not want to make it stackable. But when I have printed the columns, my daughter wanted to build higher tracks.…
English Version: These are the things you need to print out: Cabin 1x Roof 1x Magnet holder 1x Crane head 2x Crank 2x Crank pin 2x Wagon 2x Winch 1x Wheel without rubber 8x or (optional) wheel with rubber 8x Assembly aid01 1x Assembly…
Hello Everybody, I just made for my daughter´s all-day school new tokens of the game Downfall. I did not noticed that the English name is Downfall so I created new one with a bevel. The German name is Slotter Dimensions are 15x15x5,4 mm.…
I needed a protective cap for my daughter's music stand. It had to be a rectangular cap with a semicircular end. Since more people in this world certainly need such caps in individual dimensions, I decided to make an OpenSCAD file. Why…
Hello Everybody, I made this tokens for the draughts game (German: Dame Spiel) and Nine Men´s Morris (German Mühle Spiel / Mill Game). Have Fun with it. Markus Print Settings Printer: Anycubic i3 Mega S Rafts: No Supports: Yes Resolution:…
Update 21-05-18: I have constructed them new, because I am now very much better in Blender. Printing time is lower than before. On every new construction of a murble run, there are too less of them. Print them by your own. I founded a…
Hello everybody, this is a remake of the murble run gutter by SlutMonkey. The plate is having the height of 12mm and it looks a little bit nicer than the old one. This tower turner is for the blue tower. You will find the blue tower in…
What is a railroad without a station? Not a complete railroad. That's why I printed my children a station with outbuildings to mark the end of their wooden train time. We had an idea in Bramsche of how to get the passengers to the other…
Hi Everybody, I just made for my daughter´s all-day school new tokens of the game 4 In A Row. This token are created with bevel. Dimensions are 17,5 x 17,5 x 3,4 mm. Have fun with it. Print Settings Printer Brand: Anycubic Printer:…
This is the double bowl, which works fine with the changing tower: https://www.thingiverse.com/thing:4561392 In the STL-file I deleted the names of my children. If you want names, logos or pictorgrams in it use the file for Blender or try…
The hole dimension 180 mm (measured at the center of the holes) is for the short lines. It fits on the roundabout and diagonally into the printer. I constructed it for my kids. I was inspired by another murble run: Lena Cascade murble…
The hole dimension 225 mm (measured at the center of the holes) is for the normal lines. It fits on the roundabout and on the curve which is a 1/6 circle. The total dimensions are 269 x 18 x 44 mm. It would be glad, if someone who printed…
Hello everybody, this is a further development of the HAPE Quadrilla Tower Turner for the Blue Tower. The plate is having the height of 12mm and it is only for the turquoise and green tower made by rhonan…
The hole dimension 225 mm (measured at the center of the holes) is for the normal lines. It fits on the roundabout and on the curve which is a 1/6 circle. The total dimensions are 269 x 18 x 44 mm. Attention: Update 2021-07-12: I made a…
Hi everybody. First I copied the yellow fence of Playmobil 123 (I just made it even better). But I know that the company Playmobil does not like it. So I created an own one! This is better than the original: 1.You need 8 for a bigger…
The hole dimension 180 mm (measured at the center of the holes) is for the short lines. It fits on the roundabout and diagonally into the printer. I constructed it for my kids. The total dimensions are 224 x 18 x 44 mm. Update 2021-06-07:…
This is a part of the Quadrilla Murble Run you allways have too less. I founded a group for the HAPE Quadrilla marble run: https://www.thingiverse.com/groups/hape-quadrilla-marble-run Have fun to print. Category: Construction Toys
Update 21-05-18: I have constructed them new, because I am now very much better in Blender. Printing time is lower than before. On every new construction of a murble run, there are too less of them. Print them by your own. Here as double…
Update 21-05-18: I have constructed them new, because I am now very much better in Blender. Printing time is lower than before. On every new construction of a murble run, there are too less of them. Print them by your own. I founded a…
Update 21-05-18: I have constructed them new, because I am now very much better in Blender. Printing time is lower than before. A new picture is comming soon. This is the orange tower with just a hole inside. I founded a group for the…
Update 21-05-18: I have constructed them new, because I am now very much better in Blender. Printing time is lower than before. On every new construction of a murble run, there are too less of them. Print them by your own. Here espacially…
I saw this tower here and print it. Tried to print it with and without supports, but it does not work for me. So I decieded to print parts and put them together with screws. Print "HAPE Quadrilla Turm Rot Wechsler1.stl" twice with a…
Hello dear do-it-yourselfers and tinkerers, to measure an outer radius, there are some tools here. But if you want to measure an inside radius, the air gets very thin, as they say in Germany. Here are three quick-to-print plates with…
To wszystkie aktualnie dostępne wyniki.
