Liczymy pasujące modele…
Designed specifically for use with the NavePoint 22U 2-Post Open Frame Rack with Casters (SKU: 00404145). Other similar models sold by Navepoint may work just as well but I can not verify. Let me know! The holes on the sides looked like…
UPDATE 9-29-2022: Another Kobra user pointed me to this SKU: MF50152VX-1L02C-A99 I purchased this fan and verified it spins all the way down to 1%, so I highly recommend this one! I have also uploaded a v2 of my design! UPDATE 10-01-2022:…
Designed specifically around SquirrelBrain's Narrow Mod for the RatRig V-Minion, but should work for the standard EVA 3. I've included models for each side, for your convenience. EDIT 8/11/23: Uploaded v2 with cable guide.
Modified to fit standard 15mm CPAP hoses
Still a work-in-progress. Please see the “ Differences of the remix compared to the original” section below for more details. INSTALL THE "Y Endstop Assembly v4" BEFORE INSTALLING THE Y-AXIS MOTOR/ASSEMBLY OR THE Y-AXIS LINEAR RAIL. IT IS…
Install so the board is facing backwards.
A fan shroud designed for 3010 fans
Remix of @Steve_9363's Bin Dividers for 10 division, 5 division and a 4 division variants; for Akro-Mils 10144 or 10164
Wanted to integrate the Rat Pack, but the cost of product and shipping was over $70 USD -- not really in the budget. Found a WINSINN 2 pin fan for about $13 and HEPA filters for $16. Rat Rig's custom fan uses 3 pins, dual connectors.…
UPDATE 8/8/25: Uploaded oval shaped mount
Heavily modified from jubidition1's original design to fit the short length cable nozzle cam.
Added some holes so the nylocks won't make contact with the tensioner containers. Please visit the original page for the pulley holders.
STEP file for easy modification. I used an M5 bolt and nut to mount it to the bed. Mirror along x-axis for right-side bedstop.
Adjusted the tolerances of the mounting holes so that the device won't migrate when mounted. Recommend using with two M3x6 bolts. Drill or poke through the holes.
BOM: 2x Tectonic TEBM35C10-4 BMR 2" Full-Range Speaker 4 Ohm <1 meter of 20AWG 2-wire coupled wiring Male and female wire spade connectors Caveat emptor: Since we are replacing the speakers, we will lose the external controls for volume…
This protects the wires from the Z motors on a ratrig v-core as they enter the electrical compartment. These wires run on the bottom of the 3030 extrusion at the bottom of the machine and can easily snag on something while moving the…
You're intended to use M3 bolts to hold the two halves together and superglue them. You unscrew the bolts after the glue has dried.
In my sleepy stupor I inadvertantly stretched my CPAP hose, rendering it too limp to avoid kinking. It was an expensive heated tube, so rather than toss it and buy a new one, I designed this one to give it structure. It works pretty well.…
Uses the same hole spacing as the floor panel. Mounts to the right of the rear rail.
3D printable replacement frame for the White Round Glasses #3229730 that Zenni has decided to sunset. My friend tasked me with 3D printing these frames as his broke and Zenni no longer carried them. I got to learn how to reverse-engineer…
Designed for use with 550021 lenses found on Zenni. I did the VR mod and was unable to get any of the other Rx lens holders to actually hold my lenses, they simply would not fit with the GearVR mod. So I designed my own holder from…
A case to hold the lenses cases from M600 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No How I Designed This I just stretched the lens case big enough that it would fit two of the original ones…
To my ears, this sounds the same as the Valve Index Drivers. They sound pretty dang good and work on desktops, laptops, smartphones, the SteamDeck, and Android handhelds. Bill of Materials: x2 Tectonic TEBM35C10-4 BMR 2" Full Range…
For cable restraint you will need to download and print O2S Wirestrain_Lock.stl Has a hole on the top for piano wire.
To wszystkie aktualnie dostępne wyniki.
