Liczymy pasujące modele…
BudgeProjects had a good concept but the design needed cleaning up instead of modifying his files, I rebuilt the gearbox from the ground up. Now to correct his gear ratio is not 16 to 1, it is 7.5 to 1, gearboxes like this are calculated…
I recently changed to a Titan Aero, but wanted a bracket for my BL Touch, but I could not find any stand alone brackets so opted to design one, this mounts off the fan, and puts the BL Touch in line with the nozzle and 41mm in front. I…
Just finished designing a another printer upgrade, which is designed for the E3D Volcano hotend. And look at home with my other upgrades on the Geeetech Clone that I have It uses the the V6 fan-duct and 30mm cooling fan to mount it, and…
I liked Sungod3k design but i had to use a vice to hold in place while the drill ran, so I made a more substantial assembly and used a 608 bearing to maintain the drill bit centered in the assembly, for the time being the trigger part…
As I am now starting to purchase and use 3Kg Polymaker spools, I decided to retire my Spanner Hands spool holder which served me well for the last 5 years and print a new one using a similar concept for the 3Kg spools. In the ends of the…
I created this hopper for the filastruder V2, as i was having too many problems using it vertically that i reconfigured for horizontal operation. The Hopper extension and lid I drew up in Fusion 360, and used the window idea from thingi…
I've uploaded my latest hotend for those that use the printers with a 30mm spacing as used on the GeeeTech printers and clones. As I use a Volcano Hotend with a 0.4mm nozzle, and ive decided to go back to a BLTouch for my bed leveling,…
I redesign the chute used on the Vertical hopper so it can be used on the Version 2.0 filastruder. Plus I also design a vibration mechanism for the chute to solve feed issues, the vibrator is a little too powerful so I need to seal the…
I needed a universal part cooling solution for my hemera, as all the solutions on thingiverse only put the fan on the right side (looking at the hemera fan facing towards you) I needed mine on the left, so I designed my own fan duct…
I remixed this as the original one was designed for the first version of the filastruder, I redesigned it for version 2 plus i put a longer arm on it, to keep the fan at least 25mm from the nozzle as if it is too close, it causes the…
UPDATE 28/04/2017 Please ensure the lines are tensioned tight enough and check the tension every few prints, if you loose tension your print will fail a good simple test is pluck the fishing line if you hear a high C or high A you have…
I liked achmed20 cooler for the Titan Aero but I use a volcano on mine, so I modified the fan shroud to suit a Volcano heater block. Category: 3D Printer Accessories
To wszystkie aktualnie dostępne wyniki.
