Liczymy pasujące modele…
This is a small remix of a creditcars size stand. This is only 3 x 6 cm and 3mm thick. It takes only 30-40min to print.
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Use suppost as shown in green in the image.
Wydruk około 4,18 €–5,10 € nettoWstępna wycena jednego wariantu
This is an improved version with ice filling at the top instead of at the bottom, to prevent leakage when the ice melts. In addition to use crushed ice ( Method 1 ), there is a method of pouring in water directly to freeze it ( Method 2…
Wydruk około 11,04 €–13,49 € nettoWstępna wycena jednego wariantu
Gear Wheel refrigerator magnets in 4 different sizes 25 teeth 30 teeth 30 teeth with propeller. 45 teeth closed 45 teeth open 60 teeth Use round magnet smaller or equal to 16mm diameter x 4.5mm height Use 0.16mm layer height or smaller…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Preferably print with PETG as it is more water resistant. Put the InnerCower in place before pouring on the ice, as it is easier to get the ice correctly placed. Once the ice is placed, remove the InnerCower and put on the TopCower.…
Wydruk około 0,84 €–1,02 € nettoWstępna wycena jednego wariantu
3 different hooks and rings for sliding into caravan slider. For clothesline towels and other atachment.
Cellphone Cable organizer. Better tolerance and adjustment of cover tension so the cable doesn’t unwind itself because of loose cover to box friction. Two sizes are available. Main Box height of 18 or 25 mm. Slicer settings for Center…
Print In Place Boxes Include 6 boxes that fit into each other. Customizable by Fusion360 f3d file (ParameterBoks-V6 v7.f3d) Box sizes are fully customizable with Fusion 360. Sliser settings (Simplify 3D): Box wall thickness are set to…
Very easy to peel Oranges with this orange peeler. Print with layer height of less or equal to 0.15 mm for sharpest peeling edge. Video: https://youtube.com/shorts/n5TloG01Yb8
Snowman in Vasemode Use a 3 layer brim with at least 15 outlines. Use no top and bottom layer. Print in clear PETG. SnowManButtonIndent.stl has button indent indent of outwards. Print Settings Printer Brand: Creality Printer: Ender 3 Pro…
A flame LED Tea light cower. Use clear or transparent PETG. Use PETG because it is clearer than PLA. Use VaseMode only. Print Settings Supports: No Resolution: 0.2 or 0.3 mm Infill: no Filament: - PETG Clear or transparrent color Notes:…
GoPro 360 coupling Quick attachment and 360 coupling for GoPro atachments. All my GoPro related Things: GoPro Bike and tripod atachment with quick coupling https://www.thingiverse.com/thing:4570589 Phone stand with screw and GoPro…
Nuka Cola bottle. Can contain 0.5 litre. Print in VaseMode with 3-4 bottom-layer and 0 top layer. Paint with clear epoxy for clear glass result and no leakage. You may have to adjust the size of the cap to make it fit after painting with…
2 magnets (max dimension: 15x8mm) are needed to attach it to the back. (I used 15x5mm). This makes it easy to empty the container. Magnet cower should fit snugly. The container has the necessary distance from the wall so that it does not…
Attach the Creality Sonic Pad to the front of a shelf. There are 2 versions. A shelf thikness of 16mm . A universal bracket that is independent of shelf thickness. The Sonic Pad can be easily removed and reattached. No support is needed.
Ring Light This include two sizes of ring light. With inner diameter of 200 mm. It neads a printer bedsize of at least 250 x 250 mm. With inner diameter of 165 mm. It neads a printer bedsize of at least 200 x 200 mm. Glue aluminium foil…
GoPro Table Clamp Clamp Gopro stand for table with flexible height. For more belonging parts. Look at Gopro Attachment system: https://www.thingiverse.com/thing:4696725 Screws needed: 3 pc 5x10mm screw with Hex head 1 pc 5x25mm screw with…
Just another cellphone stand. This is with a fastner screw to ensure ridged attachment. I have made a YouTube video of how this was made. Only in Norwegian for now. For a bike attachment use this: Phone Atachment to Bike with spring…
A camera Stand for DSLR cameras. All Screws are GoPro attachments screws. Use a 5mm threaded tool for brunching up the threads in the mount. Use 5x25mm screw with hex head in the ScrewHead5mm part. All my GoPro related Things: GoPro Bike…
A GoPro Attachment for Bike with Quick change for adjustable tripod. Use a Spring if you like (as shown in picture) to fast adjustment to ground. Tighten the screw with spring before placing the tripod with GoPro on the ground. The spring…
Use PETG for clear vase. This is a VaseMode print only. Se picture for my Siplify3D parameters for VaseMode. Category: 3D Printing
A pile of different Vases. Most of them has two versions. Vase mode and "Normal" printing mode. It is recommend with 0.1 layer height and/or 0.8 mm nozzle for some of the vases in vasemode because they have areas that are quite low slope…
This is a remix of my previously published Shower Head Holder . For 22mm shower-rod diameter. It uses one screw only for both fastening av adjusting shower head. Use preferably PETG because it is more water resistant. Other parts are: 1…
VaseMode Star. Use a brim with 2 to 5 outlines. Print 2 pieces in vasemode. Carv out the end of the "shaft" to fit the top of the tree or Tea light. Glue the 2 half together. One model for LED-Tea-Light with big shaft. One model for Xmas…
X-mas tree. Important. In vasemode, use 0.1 mm layer height. If you use 0.2mm layer height, the tree wil fall apart while printing. There is also one STL file for tree in regular mode printing, but vasemode version will give a better…
Two types of soapdish: Without place for nametag With place for nametag Room for water to drain thru the bottom. Soap dish can be placed in an included box for traveling. The bottom box also functions as a collector for water from the…
Flexible screw box system. Can be stacked on top of each other and use Nut as Cover 3 different screw-box sizes. Inner-height: 60mm 100mm 150mm Inner diameter: 56mm Sliser Layer height: ≤ 0.15mm Filament used: PrimaSelect PLA glossy…
Ajusteble cellPhone stand. 3D print in 3 different parts. Use 3D Filament1.75mm as axel for the parts and glue with a smal drop of superglue in each end of the axel. How I Designed This I used Fusion 360 to design this. Category: 3D…
All letters for Matthias Wandel pantograph, including upper and lower case, numbers and some common special characters. Also including Norwegian characters, æ,ø and å. The total height of the letters including base is 144 mm. If they…
The LED list uses the two Z stepper motors as Attachments. The list are pressed in place around the motors. You need a printer with (X or Y) of at least 340mm to print the list. Use PETG because of the heat from the LED. PLA will…
A phone attachment to look at your Phone while Biking. Look at Google maps while on the bike. I recommend using PETG for the spring to make it more elastic and sutable for the phone damping. See the damping effect here:…
Telescope Sefie stick. Nearly 1 metter long. Important: In Vasemode, for optimal tight fit, you need about 0.9 mm wall-thicknes. This can be done for 0.4 mm nozzle by using Extrution Multiplyer= 1.40 and Extrution With = 0.6. Use also 1…
A soapdish for shower rod. The Soapdish are in 2 versions. One is mirrorflipt to best atachment for you. Use 5mm screw with hexhead for the screwHeadHolder. Use 5mm threadrod for bruching opp threads. Se also Showerhead holder:…
New version of the ring light . This is larger. 280mm in diameter and needs a printer with at least 280mm in X and Y. Use PETG that can withstand more heat. Glue aluminium foil to the reflector for maximum reflection. The reflector can…
For pavilion with 80mm diameter posts. Print in place. Need no support. Parts are quite easy to separate.
Tubes printed in TPU for adhesive application. They can be printed with 5 different nozzle diameters in the top of the tube (1, 1.5, 2, 3 and 4 mm) and 3 different lengths 8, 9, and 11 cm. 1mm nozzle is a bit smal and has a tendens to…
Soldering stand with magnetic clip and base magnet. Uses 6 neodymium magnets (12x5 mm). Must be printed with TPU filament to allow the magnets to be inserted after printing. If the polarity of the magnets is reversed for one of the towers…
To wszystkie aktualnie dostępne wyniki.
