Liczymy pasujące modele…
UPDATE: Wasn't totally happy with some of the teeth. Went through the process again to clean up some of the teeth and simplify the mesh further. Most recent is clamp_remix2.stl Remix just to clean up and simplify the mesh a bit. Starting…
UPDATE: Remixed for dual magnets per side, here http://www.thingiverse.com/thing:2093075 I had 3 mm x 1 mm cylindrical magnets sitting around. These did not fit into Dakanzla's bases particularly well (and it required many magnets). I've…
These threaded inserts provide the ultimate securing method for your lidded boxes or urns. All threads are double-start and take ~1.5 complete turns to fully open/close. Number indicates dimension (in inches) of the body of the female…
These models provide the basics for constructing a DNA double helix. Each nucleotide requires: 1 Backbone and 1 Base (G,C,T, or A) Each base pair requires: 2 nucleotides (above) and 2 (A-T) or 3 (G-C) hydrogen bonds (Hbond). All the base…
I recently saw some neat turned pens with herring bone patterns. Rather than glue individual pieces of plastic as the separators that help the colors stand off, I figured I would just 3D print the pattern so it can also serve as an…
3D scan of Killyox from Confrontation 1st ed (Rackham). I do not have specific rights to this model. If a rights holder exists and wants it removed, please contact. Category: Toys & Games
These pieces allow easy printing and assembly of a "buckyball". Minimal supports are required to print. When printed small, the assembly is easier if the pins are trimmed. Being split allows you to scale and print different sizes that can…
These are multi-color models for 3D printing and assembling a DNA double helix from individual base pairs. The models are separated by atom type and bonds and are named based on the components. Objects that should be aligned and printed…
Many people use the Uvex Bionic face shield for wood working. It is cheap and works well, but I always had my eye on the >$1300 face shields with integrated air filtration. Rather than plunking down the money, I decided to attempt a DIY…
3D scans of models from 1980 Grenadier set. The table top was quite difficult to get scanned. There is an edited (non-manifold) version that removes the blue tack that was used to hold it. I may update that one if I get the chance. I do…
This is a simple sprinkler head that fits into 1/4" drip irrigation tubing. It is distance adjustable using a 4-40 (or similar size) screw threaded through one of the holes in the top of the deflector piece. Printed in ABS, as this will…
These tokens fit into card slots of the Catan Storage set ( http://www.thingiverse.com/make:270114 ). The knight model is from http://www.thingiverse.com/thing:1239437 . The bridge/road model is from…
Last of my 3D scanned D&D minis from the '80s. This is the lone remaining model I have from the Elves of the Silvan Brotherhood set (6003). This is model E2 "Battleaxe". Category: Toys & Games
Fixed the two missing supports.
3D scan of Grenadier Dragon Lords miniature "Man at Arms" (A10) from Knights, Fighters, and Men at Arms box set (6005). I have several of the other models from the set, but they are in bad shape. Category: Toys & Games
3D scans of my Wizards of Sorcery, set #2001. At least one model from the standard set was missing and seems to have been replaced in the set I purchased (bought in New Zealand in 1985). Missing the arch mage's spells. I don't own any…
Just a slight customization of this cool key chain ornament. Print instructions Licence: Creative Commons - Attribution Category: Learning
3D scans from Grenadier Subterranean Terrors set. The Vi-Perdon has some damage that looks like I must have shot it with a BB gun when I was a kid. Kids are dumb. I do not own rights to these models. If a rights holder exists and wants…
You may not need to use it very often, but boy does it speed the job up when you do! Getting the perfect alignment for your OneWay Wolverine grinding jig can be a pain. These 3D printed parts take all the guess work out of it. The two…
3D scans from the surviving models form my Ral Partha Legions of the Liche King. I think I have most of the others but they all have some damage. The Balrog can be found here:…
This is designed to be used with Catan tile pieces for 2 cylindrical magnets. http://www.thingiverse.com/thing:2093075 The newer 3 mm cylindrical magnets I bought were a slightly tighter squeeze. I could no longer push them easily by…
3D scan of the Balrog from Skeletal Legions of The Liche King (10-309) by Ral Partha. I do not own any rights to the model and will remove if requested by rights holder, should they exist. Category: Toys & Games
EDIT (10.8/18): Added Blender script for base/cylinder modification. EDIT (03/18/17): Added volcano base for Dragonslayer variant by request. EDIT (2/27/17): Made a device to help put the magnets in the bases. See it here:…
The trigger on my dumpster-dived weed eater broke, so I put together a replacement. Seems to work fine. 4-5 perimeters with PETG seems to give decent flex for the return piece, though I have only used to it a couple of times so far.
This is a complete rework of my previous amino acid kit ( https://www.thingiverse.com/thing:2175399 ) These models now use a different type of pin that allows them to fully rotate, but will not fall out after extensive use (though they…
These are surface representations of individual DNA base pairs. They can be printed and assembled to form an idealized DNA double helix. These models can be useful for showing students how individual base pair units can assemble into a…
These are 3D printed molds for creating silicone rings to fit over 3" or 4" PVC used in making vacuum chucks.
Establishing the distance of the Vee arm is important for reproduciblity when using the OneWay Wolverine sharpening system as it establishes the grind angle of your gouges. This solution allows you to clamp 3D printed spacers directly to…
Robust live centers (and others) have ¾"-10 TPI threads for accessories. This adapter lets you put a 1.25"-8 TPI chuck onto this live center. This can be useful for centering or for reverse mounting on some clean-up operations when you…
3D print this famous Austin icon by Daniel Johnston. I grabbed an image, converted to paths in Inkscape and extruded in Blender. You may want to flip 180 degrees to put the image on the build plate. Print instructions Licence: Creative…
A complete surface representation of a GroEL-GroES complex based on PDB entry 4PKN. The two GroEL and GroES complexes are printed separately and contain posts and holes so they can be assembled and disassembled. Print instructions…
These are designed to slip over PVC tubing when making vacuum chucks. The Fusion360 file is provided and it is parametric, so changing the centerdiameter will modify the overall size. 3MF contains various common sizes.
Several pieces that enables wall mounting of the OneWay EasyCore knives. These should be printed out of PETG or similar springy material (PLA won't work well).
Remember, the US government wasn't using chemicals on the peaceful protesters, they were just using capsaicin. Print instructions In 3 pinned pieces that can be assembled together.
I recently got a OneWay EasyCore system. It is lots of fun but there are a lot of pieces! I wall-mount as much as possible in my small turning space. This bracket stores all four of the EasyCore fingers (rests) in a single, compact,…
A very basic insert design for the Wen 3921 scrollsaw. The one that came with it is a bit flimsy because it has cut outs for both directions of cuts. Step and Fusion360 files for modifications.
This design fits over the cutter of the OneWay EasyCore coring system. It will protect the cutters from banging around (and your flesh from the sharp edges!). Recommend to be printed in TPU or other similar flexible filament.
Video: https://youtu.be/-qzkJFe4Lkg These are the printed parts used to make the Tiamat tool-changer as seen at MRRF2019. I hadn't planned on releasing these as it was really designed for a one-off motion system, but there seemed that…
I'm developing Blender scripts for processing molecular models for 3D printing. I recently worked out some scripts for splitting up CPK (spacefilling) models into sets of atoms by element type. This is the first attempt on a Prusa i3 with…
This is an idealized B-form DNA duplex surface representation with a G-C base pair exposed. This helps illustrate the major and minor grooves, and helps to visualize how the nucleobases are involved in stacking within the duplex. Files…
I scanned this long ago from a WWII-era book. I converted the bitmap to vector graphics in inkscape, and solidified in Blender. I've put it in the positive and negative relief so it can be printed, dual extrusion printed, or used to make…
To wszystkie aktualnie dostępne wyniki.
