Liczymy pasujące modele…
This clamping knob replaces the original one and utilizes a M4 Ruthex insert available on amazon: https://www.amazon.de/Gewindeeinsatz-Gewindebuchsen-Einpressmutter-Kunststoffteile-Ultraschall/dp/B07YSV66Y5 Can be printed in most rigid…
I changed some angles to reduce material consumption and allow printing without supports. Also, I enlarged the holes to allow the use of the stand with some sizes of the Wera-screwdriver that have a larger shaft. The model should be…
Can be printed without support. Use any double-sided adhesive tape for attaching the holder to a vertical surface and degrease surfaces thoroughly.
The organizer is 105 mm high and an inner diameter of 160 mm. The base diameter is approximately 144 mm. The inner cavity is 100 mm high.
After printing, the spout should be enlarged by hand with a 4 mm drill to ensure a snug fit of the PTFE tube as is. Can be printed from any filament.
During the lowering of the toilet seat cover, the cover rubs against the toilet seat at the joints which produces a quite noticeable (and annoying) squealing or crunching sound every time the cover is raised and lowered. The rings…
You will need some additional hardware: 1x M3x12 button head screw and an M3S Ruthex insert. One of the holes in the hangerclamp is a little bit larger than the other. The insert should be inserted with a soldering iron or similar into…
I have modified Elbarto919's model, which is a modification of the original model by boulwarek, by enlarging the clearance hole to 6.5 mm around the screw head of the screw which screws into the bottom of the stepper.
These corner door-stopper adapters protect your baseboard. They are designed to fit the Bummsi door-stoppers from Burg-Wächter: https://www.amazon.de/gp/product/B001CTNLCM The door-stoppers have a diameter of 50 mm and a height of 14 mm.…
This case is for three spotting drills with 3 mm, 6mm and 10 mm diameter with a tip-angle of 120°. I modeled the case after these three drills: 3 mm:…
By using this dosing aid, you can create a 4 %-solution for your EMAG EMMI-D30 ultrasonic cleaner with ease. Just fill it to the brim and dump it into the half filled tub of the cleaner. Then fill the cleaner the rest of the way with…
ESGE is a brand of corded stick-type mixers. As an acessory for those mixers they used to sell the so-called “Zauberette” which is a small granulating/grinding attachement that is designed to be used with the mixer, e.g. for breaking down…
To wszystkie aktualnie dostępne wyniki.
