Liczymy pasujące modele…
Five case designs to fit typical (11.75 x 23.75 x 67mm) disposable lighters. Model 1 - plain Model 2 - small raised dots Model 3 - small round holes Model 4 - large round holes Model 5 - large raised dots Printed in PLA. The models with…
Quite fragile. I suggest printing at half speed and 0.1mm layer height. Printed in black recycled PLA+. Increasing the bed temperature seems to help adhesion near the edges of the bed. Daa da de daa daa, da da da da de daa daa.
A remix of spingoogL's toroidal propeller script. The 3mf file has coloured edges. This was made to fit tightly on a 1.4-mm axle.
Six decorative frames to fit standard UK light switches (86 x 86 mm). All models are 2 mm deep. Rescale if desired. LSF-Leaves is quite fragile, take care when removing from plate. NEW: Volume 2 has six more frames! Find it at…
The model is 3 mm high and takes around 12 grams. I used black PLA and a 0.2-mm layer height on my trusty MK3S+. The supplied orientation puts the flat headbed surface on the front. Daa da de daa daa, da da da da de daa daa.
A simple bookmark, 1.1 mm thick. Printed in black PLA. I recommend printing at a slow speed and turning on ironing. Made in OpenSCAD.
I had fun making the previous set of light switch frames so I made some more. You can find volume 1 at https://www.printables.com/model/1195649-uk-light-switch-frames These fit the 86-mm light switch faceplates used in the UK and Europe.…
I made this to mount a webcam onto a table edge. Don't use it for a camera of any significant weight. Clamp: this attaches to the edge of a table with the mount on top. The original clamp (…
The maximum height is 4.5 mm. The top blue part is 0.6 mm high. If you use the stl, add a colour change before this starts. I used a 0.15-mm layer height, enabled ironing, and printed using Jayo white PLA and Lonenessl Blue PLA. The print…
I had quite a few of these cheap storage boxes so made a rack for them. ( https://www.reallyusefulproducts.co.uk/uk/html/onlineshop/rub/b00_14litre.php ) The design was inspired by the Ikea Samla storage rack and the model by Thors…
I used fairydoor_b from Want_cookies - prints in place with hinge. I added a wooden texture to the front using BumpMesh ( http://bumpmesh.com ) . This is a great tool and perfect for this item. Painted the front to bring out the texture.…
Print in black PLA, or preferably PETG for outdoor use. You'll need PAINT-ON SUPPORTS on the bottom of the upper arms. These are in the 3mf file. Not multicolour - painted with a silver acrylic pen. Campaign info is at…
A mini globe in cube form. The 3mf file prints all six sides using a layer height of 0.15 mm. I used 10% gyroid infill. There is a colour change at layer 30. If you use the stl, you'll need to add this yourself. The sides snap together -…
A remix of Dan Malm's universal rack shelf builder - https://github.com/wildegnux/universal-rack-shelf This audio/video patchbay is designed for use with McBig's 10 inch rack - https://www.printables.com/model/427461-10-inch-server-rack -…
A map of Greenland with the Greenlandic flag. The 3mf and gcode files include colour changes. I recommend enabling ironing. base layer - white middle layer - red top layer - white Kalaallit Nunaat kalaallinut pigineqarpoq.
This is not really transparent, but is reasonably translucent. It fits large Nescafe coffee jars, allowing their use as a terrarium. Printed with Geetech transparent PLA. It takes around 3 hours. Many thanks to Steve DeGroof's lid design.…
A remix of https://www.printables.com/model/194720-behringer-bcr2000-stand-30o-angle with slightly more weight at the front.
Print the three parts separately, then superglue the hook to the cap. I used Jayo black PLA and a layer height of 0.20 mm.
This supports the mini version of the Hive thermostat. A remix of joepublic's design, adding support on both sides. For the stand, I recommend a layer height of 0.20 mm and printing with a brim. I used 15% gyroid infill. For the two…
The clamp and screw print easily without supports. The penholder needs supports, and takes a while to print.
An upright desk holder for this unbranded USB 3.0/SD/microSD/audio device. It's sold on ebay as "8 in 1 Multiport USB-C Hub Type C To USB 3.0 4K HDMI Adapter". Easy to print, I used black matte PLA.
TEXELLATION How many Texases can you tessellate on the Gulf of Mexico before the tower topples? Printing - I used PLA with a 0.2-mm layer height. For the Texas tiles, start with white, then change colour to red at 8.8 mm and blue at 9.4…
This frame fits a large mirror with a diameter of 446 mm. Scale as required. It prints in five parts. You could glue the parts together, but this isn't essential. Attach with glue or blu-tack. The design is public domain, and is taken…
This extends the width of Zanfar's two-part filament spool by 25mm. Useful when a filament refill comes loose. https://www.printables.com/model/4277-filament-spool
Squiggly wall art formed by summing three rotating vectors. Four ‘preset’ STLs are included. You can edit the parameters or randomise them in the OpenSCAD customiser (which has details of how to do so). To access the presets in OpenSCAD,…
No special settings, I used Jayo black recycled PLA+.
Fits over GoPro Hero 3+ for recording oscilloscope. Print it with supports enabled.
This fits the NP13ZL lens on the NEC PA522U projector. The inner diameter is 91.3 mm. It might also fit lenses NP11FL/NP30ZL/NP12ZL/NP14ZL/NP15ZL on this and other NEC/Sharp PA and PV series projectors. Printed in white PLA, with a black…
This connects two CDs together. A good way to reuse old CDs or DVDs. You can make a rigid hexagonal grid or let parts swing freely. The disk need to bend slightly to fit the connector. I wouldn't recommend this for disks with any useful…
Based on Fish154's model. I made it stronger because I printed in PLA. One shouldn't use PLA for outdoor things. But I did. :) Update: I've also made this in PETG.
A capswap with a vortex pattern. The LEDs show on a thin 'screen'. I suggest printing the pattern in black and the rest in white, with a speed of 50% for at the first few layers.
A simple way to print a flexible sheet. The object itself is just a cuboid, 200 x 200 x 2 mm. Scale as you see fit. The pictures show 200x167x2, made in black PETG. Should also work with PLA, but I've not tested this yet. Here's the…
Based on Route3d6's brutalist dice, using the same hole layout, but with round holes and rounded edges. The size is 24 mm, but can be rescaled. Printed in PLA with 15% gyroid infill, no supports needed.
Print in the supplied orientation. I used white PLA.
This fits the dbpower RD-810 mini projector. The inner diameter is 56.5 mm. It *might* fit other similar mini projectors. Printed in black PLA, with a white rim for no particular reason.
The perfect item for demonstrating the sequency-ordered Walsh matrix ( https://en.wikipedia.org/wiki/Walsh_matrix ) use as a coaster or wall art There are files for matrices of size 16/32/64/128. Scale as you see fit. The 3mf files…
A spinner with magnetic gears! Hardware required 18 neodymium magnets (diameter 5 mm, height 2 mm) 9 M4x20 steel screws. I used pan-head pozi-drive. Other heads may work, but the total length must be 23 mm. Printing I used PLA and 15%…
This is a garden wind spinner with spiralling text. Made in the form of some cheap plastic spinners. The text is the lyrics "The Windmills of Your Mind" by Noel Harrison ( https://genius.com/Noel-harrison-the-windmills-of-your-mind-lyrics…
I've been trying ways to make flexible fabric. This is the thinnest flag I could make. Dimensions are 240.4 x 120.4 x 0.9 mm. The print won't be perfect as the white part around the maple leaf is printed 0.3 mm above the bed. Slicing…
I've taken the lovely model by @Plunning, scaled it, and added a wooden texture using Bumpmesh ( bumpmesh.com ). Printed in black PLA and painted with a light brown acrylic paint pen. (The bottom surface isn't texturised as it really…
I love the Solar System Lithophane Planet Lamp Collection by @FritzPeppone. One time I printed it the print failed just north of Australia, leaving a pretty white bowl. Hopefully when you print a planet lamp it won't fail, but if it does,…
Thanks to PanicSphere for the Mahjong dice model. I've remixed it to add inserts in a different colour. The inserts are delicate - they should fit snugly. Use a TINY drop of superglue if they're loose. I used PLA - black with white and…
To wszystkie aktualnie dostępne wyniki.
