15 modeli
Just a little test model I made of the Pokemon Diglett. High Poly Prints without any support. https://www.tiktok.com/@3dfilaprint/video/7201112740109290757 Print Settings Printer Brand: FlashForge Printer: Adventurer 3 Rafts: No Supports:…
A Life size Ditto High Poly model. Bed size required: X:219mm Y:197mm Z:200mm Two versions to pick from One hollowed and one solid Perfect to be Painted. If you want a smaller Diglett: https://www.thingiverse.com/thing:5556569 Fits…
This is my attempt at making a Junimo plant pot, I was inspired by this model thing:4851143 https://www.youtube.com/shorts/qKZXTCLtixY But I wanted somthing with a wider base and that was easier to print as a vase in order to use Two Tone…
A basic remix of this candle stick thing:911705 to make it blocky. Printed in ASA Extrafill Traffic Black 1.75mm 3D Printer Filament: https://shop.3dfilaprint.com/asa-extrafill-traffic-black-175mm-3d-printer-filament-6841-p.asp Print…
A bunch of different guinea pig baubles for my GFs Christmas tree Customised but I aslo provide the basic one. Should print with any PLA Print Settings Rafts: No Supports: Yes Filament: Polyalchemy PLA Post-Printing =============…
Designed to work with https://www.thingiverse.com/thing:3121487 Make sure to print at 0.1mm layer height or lower for tolerance, I printed mine in PETG For one Rod it literally takes 10m so go crazy. Print Settings Printer Brand:…
Make sure to print to with food safe materials! https://3dfilaprint.com/product-category/filaments/filament-properties/fda-approved-food-safe-filaments/ Category: Art Tools
A basic model of the Johnny Soap Emblem from Call of Duty Modern Warfare 3 For more info check: https://callofduty.fandom.com/wiki/Johnny_%22Soap%22_MacTavish Print Settings Printer Brand: Bambulabs Printer: Bambu P1P Rafts: Yes Supports:…
Printed in https://shop.3dfilaprint.com/filaprint-glow-in-the-dark-green-premium-pla-175mm-3d-printer-filament-8112-p.asp On my Flashforge Adventure 4 I can only recommend 3D Printed stretchers as a one time use as it cant be guaranteed…
This is a work in progress and does require a fair amount of faff post print to get it all working! Mask and mouth is a tight fit was designed to use magnets but I ran out of time. I used small screws with loops I drilled into the inside…
Just a basic little plant pot with a water catcher. Available with or without drain holes. The hex patten is designed to create a great shimmer effect with 3Dfilaprint Two Tone PLA :…
Just a simple edit of the Stanford bunny to be a Christmas tree bauble. Two version one with a heart you can print out and one without that. I printed mine of my Flash Forge adventurer 4 with a 0.6mm nozzle but they can easily be printed…
Designed to work with the Bambu lab P1P Pegboard Model Here; https://wiki.bambulab.com/en/p1/modplate-customization I would recommend printing these with a higher temp material e.g. PETG, ABS, ASA. Should work best with the Pegboard…
Carries 5 standard-sized sauce packets If you want to carry ketchup or other sauce packets without worrying about them exploding in your bag, well print this. Printed using UZY PLA Jet black :…
Wanted a way to wall mount my HTC Vive Lighthouses without drilling holes in the walls, I've included the previous version but the one i used comes in 3 Pieces of the printer screwed together and the lighthouses attach using 1/4 inch…
To wszystkie aktualnie dostępne wyniki.
